A door that sits proud of the wall, with a frame that does not match the joinery beside it, is one of the fastest ways to cheapen an otherwise well-specified interior. Flush Wall Aligned Doors solve that problem at product level — but they only hold their line when the wall, the panelling and the cabinetry behind them are built to the same reference. That is exactly why we recommend specifying them inside a coordinated fit-out package rather than ordering doors as a separate trade item.
SANTERSON has manufactured furniture and building materials in China since 2008, supplying hospitality, villa and office projects overseas. Our scope covers cabinetry, wall panelling and partitions, interior doors, wardrobes, flooring, lighting and outdoor furniture under one roof. That breadth matters for concealed-door work, because the door leaf, the panel it disappears into and the built-in units around it usually come from three different suppliers on a conventional project.
What "flush and wall aligned" actually requires on site
A concealed door reads as part of the wall when three conditions are met at once: the leaf face sits in the same plane as the finished wall surface, the reveal between leaf and panel is even and narrow, and the finish — paint, lacquer, veneer or laminate — is continuous across both. None of these is a door-only decision.
- Opening size and wall build-up must be fixed before the sub-frame is made, because the leaf thickness and hinge pocket depend on the total finished thickness of the wall, not the shell dimension.
- Sub-frame and anchorage have to be set true to the wall plane. If the framing trade works to a different level than the joinery package, the leaf ends up proud or recessed and no amount of on-site adjustment fixes it cleanly.
- Finish continuity needs the same material or the same paint system on leaf and panel. A veneer door beside a painted partition will always read as an insertion.
- Hardware choice — concealed hinges, an invisible reveal or a handleless concealed door detail — changes the leaf construction, so it has to be decided at drawing stage rather than at order confirmation.
Why doors belong in the joinery and panelling package
When a project buys cabinetry, panelling and doors from separate suppliers, each party submits its own drawings against its own tolerance stack. The interface — where the door reveal meets the panel joint, or where a tall cabinet butts into a door lining — is nobody's responsibility for two weeks at least, and it is resolved on site with packing pieces and sealant.
Buying those items as one package moves the interface inside the factory. We produce made-to-measure Decorative Concealed Doors, Integrated Door & Paneling, wardrobes and kitchen cabinetry against a single set of shop drawings, so the door leaf and the panel it sits in are cut from the same batch and finished together. Where the design calls for a doorway to disappear entirely, we detail it as one unit: lining, leaf, panel field and adjacent storage.
For buyers, this changes the practical paperwork too. One specification sheet, one set of confirmations, one production schedule and one shipment instead of four — and only one party to hold accountable when a reveal is wrong.
How a coordinated package moves through the project
| Stage | What happens with flush doors in scope |
|---|---|
| Brief and design | Door type is fixed early — hinged, sliding, pocket or concealed — because each needs a different wall build-up. We advise on which detail the chosen partition can actually carry. |
| Detailing and specification | Openings, finished wall thickness, reveal width, hinge type and finish are drawn together with the panelling and cabinetry. Material and finish samples are confirmed as a set. |
| Manufacturing and QC | Doors, panels and built-in units are produced in one run. Leaf flatness, hardware pre-mortising and finish matching are checked against the same drawings. |
| Packing and freight | Doors ship with their linings and ironmongery packed so they cannot rack in transit. Sea, air or rail freight is arranged with the rest of the package. |
| Site coordination | Setting-out marks, sub-frame positions and hanging sequence are agreed with the site team before installation starts, so concealed doors are hung after the wall finish is complete but before final decoration. |
| Handover and support | Snag list, adjustment of hinges and closers, replacement parts and maintenance guidance are handled through one contact rather than split between trades. |
What the buyer needs to confirm before order
Concealed-door work fails most often on information, not on manufacturing. Before we release a set of drawings for your approval, we need:
- Finished wall thickness and the make-up of each partition, including the finish layers on both faces.
- Structural opening sizes with tolerance, plus which openings are load-bearing frames and which are non-structural studwork.
- The reveal you expect — square shadow gap, flush invisible reveal or a visible casing — and whether ironmongery is concealed or exposed.
- Fire, acoustic or privacy performance where the room demands it. Concealed doors can be built to meet these duties, but the wall build-up and seals have to match, so this must be stated in the brief rather than assumed.
- The finish system for the surrounding wall: paint code and sheen, laminate reference, or veneer species and cut. Veneer matching in particular needs the species, cut and grain direction specified, not just "oak".
- Access requirements — wardrobe interiors, plant cupboards, staff areas — since frequency of use drives hinge grade and leaf size.
Matching the rest of the interior to the door line
Once a flush door is accepted as a design device, it usually spreads. Corridors where doors read as wall panelling, storage walls with concealed cupboard fronts, and utility rooms behind handleless leaves all rely on the same detailing. We keep that language consistent across the package: Wall Panel Systems and wood panelling carry the same joint widths and finish as the doors, tall storage and wardrobe fronts continue the panel field, and where a full-height media or storage wall is involved, the door line is drawn into it from the start.
If a project wants visible door architecture instead — slim-frame glass to separate a lounge from a dining area, or traditional hinged leaves for a more classical scheme — those details are specified separately and priced differently. The important point is that the choice is made once, across the whole package, rather than room by room.
Working with one supplier across fit-out trades
Our turnkey project service runs from consultation and space planning through production, logistics, installation support and after-sales. For projects in Australia and elsewhere, we handle freight and door-to-door delivery documentation alongside the joinery package, so concealed doors arrive with their linings, hardware and fixing details rather than as a loose item on a separate manifest.
Specify your openings with us
Send us your door schedule, wall build-ups and finish references, and we will return shop drawings showing how each concealed or flush door sits within the surrounding panelling and cabinetry — with a single quotation covering doors, panelling, wardrobes and cabinetry. Project enquiries go to santerson.com/contact.