Interior Doors & Joinery

Folding doors are easy to specify badly. A sample looks beautiful in the showroom, then arrives on site two centimetres too wide for the opening, or folds into a corner where a service run was never relocated. In hotel and villa work the door is rarely a single item — it sits inside a joinery package that also covers wall panelling, wardrobes and cabinetry, and the timber finish has to read as one continuous surface. This article looks at where Santerson Wood Veneer Folding Doors earn their place in a hospitality or residential project, which openings suit the folding format rather than a hinged or sliding alternative, and what to fix at the specification stage so the doors arrive ready to install.

What the product actually is

Santerson Wood Veneer Folding Doors sit within our Folding Doors collection. Each set is made to measure for the opening it is going into, with the material, veneer finish and leaf layout specified per project rather than chosen from a fixed size range. There is no standard catalogue width to force a plan into: the number of leaves, the folding direction and the finish are set against your drawings, and the dimensions and selected specifications are confirmed for each project before production.

That configurability matters most when doors have to disappear into a designed surface. Where a wood veneer panelling scheme runs across a wall, a folding door specified in the same veneer and grain direction closes the wall up when it is shut. The alternative — a painted or laminated door beside a timber-clad wall — reads as an interruption, and it is the kind of detail clients notice immediately on a handover walk-through.

Openings in a hotel project where the folding format works

A folding door is a space-saving device: the leaves stack against one side or split to both sides, so nothing swings into the room and nothing needs a pocket built inside a wall. In hospitality schemes that behaviour solves several recurring problems.

  • Guest-room dressing areas. Wardrobe and luggage recesses in a guest room are usually too shallow for a hinged leaf to swing into without fouling the bed layout. Folding leaves close the recess when not in use and open it fully when someone is unpacking, without eating floor space in a guest room of the size typically delivered on a limited-budget scheme.
  • Suites and connecting rooms. A wide opening between two spaces can be closed for privacy and opened to make one room, without the pivot clearance a hinged pair needs or the wall cavity a sliding pocket requires.
  • Back-of-house and service cupboards. Linen stores, minibar recesses and housekeeping cabinets sit in corridors where a swinging leaf obstructs a trolley. Folding leaves clear the traffic line.
  • Meeting rooms and F&B partitions. Where a room has to switch between two configurations, folding leaves stack compactly to one side and can be finished to match the surrounding panelling so the partition is invisible when open.

For openings that need glazing rather than a timber face — a display niche, a bar front, a fully glazed partition — our glass folding doors cover that role, and the classic folding range suits schemes with moulded or traditional profiles rather than a flat veneer slab. Specifying all three from one supplier keeps ironmongery, tolerances and finishes on the same drawings.

Where they belong in a villa project

Villa work usually has more openings of this type than a hotel room, and more pressure for the joinery to look continuous throughout the house.

LocationWhy folding leaves suit itSpecification point
Walk-in wardrobe and dressing roomFull-height access with no swing radius into a narrow aisleMatch the veneer to the veneer wardrobes inside, so the closed front and open interior read consistently
Media or study wallHides screens and equipment behind a timber face; opens without blocking a wall-mounted displayConfirm cable routes and ventilation before the leaf layout is fixed
Pantry, utility and laundryOpens wide enough to load appliances while remaining clear of a walkwaySet the stack side away from the appliance door swing
Games room, cellar or gym annexeConverts one opening into two independent rooms without a second door setFix the folding direction and threshold detail on site drawings
Ensuite or powder-room cabinetShallow depth makes a hinged leaf impracticalConfirm hardware clearance against the basin or vanity projection

Where the same timber language should continue onto doors that swing rather than fold, Santerson Wood Veneer Hinged Doors and Wood Veneer Pocket Doors are specified the same way, so a house can mix folding, hinged and pocket sets without three different finishes appearing on one floor.

What to settle before the doors go into production

Most folding-door problems on site come from information that was never fixed on a drawing. Before an order is released, confirm the following with your project team:

  • The structural opening, measured on site, not taken off a plan — including floor finish build-up, since the threshold height changes the leaf height.
  • Number of leaves and stack side, checked against furniture layouts, light switches and any duct or pipe that would sit behind the stack.
  • Veneer species, cut and grain direction, approved from a sample against the panelling and cabinetry it will sit beside. Grain-matched veneer panels are not interchangeable with random-match ones at this level of detail.
  • Hardware duty and traffic category. A corridor cupboard in a hotel sees daily use; a villa dressing room does not. The ironmongery should be chosen for the actual cycle, and confirmed as part of the set rather than sourced separately on site.
  • Finish scope — whether frames, architraves and any adjacent panelling are included in the same package, so the joints are made in the factory rather than patched on site.
Project note: dimensions, veneer selection and hardware for each set are confirmed against project drawings before manufacture. Where a local building code or fire rating applies to an opening, confirm the required performance with your specifier — these doors are supplied as made-to-measure joinery, not as a certified rated assembly.

Buying them as part of the joinery package

Doors ordered separately from the rest of the timber work create three avoidable problems: finishes that do not match between two factories, tolerances that were set by different drawings, and delivery dates that never line up with the fit-out programme. As a one-stop furniture and building materials supplier, we produce folding doors alongside the panelling, wardrobes and cabinetry they sit against, so one drawing set governs all of it.

Our custom and OEM service covers bespoke finishes and textures, prototyping and flexible order quantities, which is what most villa and boutique-hotel projects need — a handful of sets in one specified veneer, not a container load. Under our turnkey project solutions, the doors move through the same workflow as the rest of the package: consultation and design, production, logistics and door-to-door delivery, then installation support and after-sales. Published project references include villa work in Sydney, Melbourne, Perth and North Turramurra.

Send us the opening sizes, a finish reference and the room layout, and we will come back with a folding-door configuration for that opening — leaf count, stack side, veneer and hardware — priced against your drawings. Contact PHILLIP on the enquiry page to start the specification.