A request for quotation on minimalist black aluminum frame cabinets can come back with three different prices from three different workshops, and none of them is wrong. The gap almost always sits in what was left unsaid: which panel sits inside the aluminium profile, how deep the carcass runs, whether the doors are hinged or sliding, and where the units have to arrive. Before you send an enquiry, put the following on paper. It shortens the quotation cycle and it stops you from comparing cabinets that were never specified the same way.

1. The drawings and dimensions you can actually build from

Send a plan view and an elevation of the kitchen wall, not a mood image. A supplier working to made-to-measure sizing needs overall run lengths, heights and depths; the position of windows, extract ducts, radiators and skirting; floor finish levels, because the finished floor level sets every base unit leg height; and the appliance schedule with model numbers or at least cut-out dimensions for the oven, hob, dishwasher, fridge and chimney extractor. If you have a designer's drawing, send it as a PDF rather than a screenshot — scale marks survive in a PDF.

If there is no drawing yet, say so in the enquiry. SANTERSON lists interior design services covering space layout planning, concept design and 3D renderings, with production coordination behind them, so an early-stage brief can be developed instead of guessed at. Mark on the plan which walls are load-bearing before any tall unit is fixed to them.

2. What "aluminum frame" means in your specification

The same black profile can carry several different door constructions, and each one behaves differently on site. Within the aluminium frame kitchen cabinet range, the options published on this site include aluminium frame with solid panel, glass front aluminium frame cabinets, smoked and frosted glass fronts, and two-tone combinations. State for each run of units whether the infill is a solid board, clear glass, smoked glass or lacquered metal, and give the frame profile width you want, because a slim profile and a deep one read very differently against a matte black wall.

Then fix the finish. "Black" covers powder-coated aluminium, PVC-wrapped profile, anodised and brushed finishes, each with a different sheen under kitchen lighting and a different resistance to fingerprints and cleaning agents. Ask for the finish name and the sample, not a colour photograph of a finished kitchen.

3. Layout, storage logic and hardware

Decide the internal configuration before the quote, because hardware is where hidden cost accumulates. Specify base units, wall units and tall pantry or larder units; then for each, say what goes inside — drawer stacks instead of shelves in low cabinets, pull-out corner carousels or magic-corner units where a right-angle run would otherwise waste space, integrated appliance housings, and an internal fit-out for bins and cutlery. Confirm the hinge brand and whether soft-close is on doors and drawers, the runner load rating for drawers, and whether handles are being avoided in favour of a handleless or touch-to-open front, as in handleless minimalist kitchen cabinets where continuous flat surfaces carry the look.

Write down who supplies the worktop, sink, taps and splashback. Aluminium frame cabinets are frequently quoted without the stone, and a last-minute worktop order changes the site programme more than any cabinet detail does.

4. Quantities, phasing and the delivery address

Give unit counts per apartment type if this is a residential or hotel scheme, and state whether the order comes in one shipment or in phases matching site handover. Cabinet projects for hotels and apartments are usually handled as built-in interior fixtures, so custom built-in kitchen cabinets for a repeated room type need a signed sample flat before volume production starts. Keep one approved reference unit at site; it settles arguments about finish and alignment far more quickly than correspondence.

For international orders, provide the full delivery address with floor level and lift dimensions, plus your preferred Incoterms. SANTERSON's logistics service covers freight forwarding by sea, air and rail, packaging and container loading, customs paperwork and door-to-door delivery — but duties, local import requirements and final-mile access are project-specific, so confirm them for the destination in writing rather than assuming a standard arrangement.

5. What to ask the supplier to return

  • A shop drawing per wall, with overall and cut-out dimensions, for your sign-off before production.
  • A written specification of profile section, infill board and finish system, named rather than photographed.
  • The hardware schedule: hinge and runner make, load rating, soft-close scope, and what is excluded.
  • Packing list by unit number, so the site team can check a delivery against the drawing instead of counting boxes.
  • Production lead time from approved drawings, and the point at which changes attract cost.
  • Who handles installation, snagging and spare parts — the supplier's own team, a local contractor, or you.

Before you press send

The single most useful line in an enquiry is the one that says what has not been decided yet. A buyer who states "solid panel to all wall units, glass front only above the coffee station, worktop by others, no drawing for the island run yet" gets a comparable quote. Send drawings, appliance schedule, finish names, hardware expectations, quantities and destination, ask for shop drawings in return, and keep an approved sample unit on site. Those five steps decide whether the aluminium frame kitchen arrives as specified or as a compromise discovered on installation day.

SANTERSON is a China-based manufacturer of furniture and building materials supplying custom cabinetry for villa, hotel and apartment projects, with design coordination, custom/OEM production, logistics and after-sales support. Send your drawings to PHILLIP at santerson@qq.com or on WhatsApp +86-13928214007, and view the aluminium frame kitchen range at santerson.com/products.