A swim spa is one of the few outdoor amenities that works as fitness equipment, a hydrotherapy facility and a marketing asset at the same time. That is why hotel owners and villa developers raise it so often during fit-out. The difficulty is that an 8-metre shell sits on a structural slab, draws power from a dedicated circuit and runs a filtration cycle every day, so the decision has to be made by a procurement team, not by a brochure.
This guide walks through Outdoor Swim Spa WS-S08M the way a project manager should read it: what the catalog specifications actually tell you, where they leave gaps you must close with your engineer, and how to decide whether this model suits a hotel pool deck or a private villa terrace.
What WS-S08M Is, In Plain Terms
WS-S08M belongs to our configurable outdoor swim and hydrotherapy range. The catalog lists it at 8020 × 2260 × 1280 mm — a long, narrow shell with a relatively shallow 1280 mm water depth, which means most adults can stand on the floor comfortably while the length still supports lap-style swimming and jet-based exercise. The features shown for this configuration are water jets, LED lighting and ozone sanitisation.
For a project buyer, "configurable" is the operative word. The same shell family can be ordered with different control systems, pumps and treatment options, so two hotels can install units that share dimensions but behave quite differently in operation and running cost. Never compare models by name alone.
Reading The Specification Sheet Line By Line
| Specification (as catalogued) | What it means on site |
|---|---|
| Dimensions 8020 × 2260 × 1280 mm | Sets the footprint, the clear deck space you need for access and maintenance, and the load area your structural engineer has to design for — full water volume plus people. |
| Jet total: 58 pcs | Determines how strong the hydrotherapy experience feels and how many seats genuinely deliver a massage. Count jet positions against your intended user capacity, not marketing claims. |
| Water pump: 2 pcs; filter pump: 1 pc | Two water pumps give separate circuits for jet duty and circulation. The single filter pump sets the turnover rate you should confirm against expected daily bather load. |
| Control system: 1 set | One control station. For a hotel deck with attendants at two ends, ask whether an additional control set is available for the configuration you are ordering. |
| LED lights: 1; 26 small LED lights | Ambient and underwater lighting. Relevant to evening use on a rooftop or terrace, and to how the amenity photographs in your marketing. |
| Total power: 6.95 kW | The connected load you must confirm with the electrical designer — cable sizing, protection, isolation and whether a heat pump is included change this figure materially. |
| Ozone | Reduces oxidiser demand, but it does not replace the disinfection regime your local authority requires for commercial bathing water. |
All figures above are transcribed from the catalogue entry for WS-S08M. Equipment included and electrical requirements vary by configuration, so confirm them in writing against the exact build you order.
When The 8-Metre Format Is The Right Answer
In project work we see WS-S08M fit three situations well:
- Terrace and podium installations where length is available but width is not. The 2260 mm width clears most deck layouts while still giving usable swim length.
- Boutique hotels and serviced-apartment blocks that want one wellness amenity shared by a limited number of rooms, rather than a full pool plant room.
- Villa projects where the spa has to do several jobs — morning exercise for the owners, hydrotherapy for older family members, and evening leisure for guests.
Where it is the wrong answer: a resort that needs high bather capacity, or a site where only a compact footprint fits. In those cases look at the shorter units in the same range, or at longer configurations such as Outdoor Swim Spa WS-S10, which carries a larger jet count and higher connected load. Comparing two or three adjacent models side by side is the fastest way to stop over-specifying.
Hotel Or Villa: The Checklist Changes
For a hotel project
- Confirm the disinfection and water-testing regime your local authority requires for commercial bathing water, then check that ozone plus your chosen filtration meets it.
- Ask about service access. A unit boxed in on three sides looks tidy and becomes a maintenance problem within a year.
- Decide supervision: opening hours, who operates the controls, and whether an extra control set is needed for the configuration.
- Model running cost from the connected load, since this unit will run every day of its life rather than a few evenings a week.
For a villa project
- Fix the slab and drainage before the shell is selected, not after. Steps, insulation and pump location all sit outside the standard catalogue entry.
- Choose the treatment package for how the family will actually use it — seasonal use in a cooler climate needs an insulation and heating plan from the start.
- Think about sightlines. With 26 small LED lights plus the main light, evening use is visible from neighbouring windows and balconies.
Options You Should Price At The Same Time As The Shell
The catalogue lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as options. Availability and compatibility vary by model, so treat each one as a line item to confirm rather than an assumption. Three of them decide whether the installed unit works as intended:
- Heat pump. It changes both the capital cost and the electrical design; adding it after the circuit is sized usually means rework.
- Insulation. In cooler or windy exposed sites this drives the whole-year running cost more than any other option.
- Steps and access. A 1280 mm deep shell with no designed step is a liability issue as much as a comfort one, especially where children or older guests use it.
If the space demands something other than the standard rectangular format, we also produce Customizable Shape Outdoor Spa - Personalized Hydrotherapy Pool, made with an acrylic shell and structural reinforcement in square, round, oval and curved layouts. Custom geometry is worth considering when the spa has to sit inside a designed landscape rather than the other way round.
How It Arrives As Part Of A Larger Fit-Out
Very rarely does a swim spa arrive alone. On villa and hospitality projects it usually lands alongside outdoor furniture for villas and resorts — loungers, dining sets and shade structures around the same deck — as well as paving, wall cladding and exterior lighting. Coordinating those items with one supplier keeps finishes consistent and reduces the number of trades on site.
We work as a one-stop furniture and building materials supplier, covering design consultation and space planning, material and product specification, manufacturing and quality control, project management with site coordination, then delivery and handover. Freight is arranged by sea, air or rail with customs paperwork and door-to-door delivery; the exact terms, duties and transit arrangements are confirmed case by case for each destination, because they genuinely differ between projects.
A Short Procurement Sequence That Works
- Start with the site constraint, not the model name. Measure the deck, note access routes for delivery and crane or crane-free placement, and establish the electrical supply available.
- Shortlist two or three models from their catalogued dimensions, jet count and connected load — then reject on operational fit rather than appearance.
- Freeze the option list in writing: control sets, pumps, heat pump, filtration, insulation, steps, lighting.
- Issue a single specification to your structural and electrical designers so slab loading, drainage and circuit sizing all reflect the final build.
- Agree commissioning and handover — who starts the unit, who tests water chemistry, and what spare-parts support applies after installation.
Before You Commit
WS-S08M suits projects that want a full-length swim and hydrotherapy experience in a narrow footprint, with the flexibility to tune pumps, treatment and heating to the actual site. It is a poor choice when bather capacity or a square plan matters more than length. If you are specifying this for a hotel, resort or villa development, send us your deck dimensions, expected daily users and available electrical supply — we will confirm the configuration, the included equipment and the connected load for that specific build before you lock your drawings.
Talk to our project team about swim spa specifications, options and delivery for your development: contact SANTERSON.