An outdoor swim spa is one of the heaviest, most technically demanding items you can put on a project order: a shell filled with water, pumps, jets, lighting and controls, shipped overseas to a villa terrace, a resort garden or a private residence. The difference between a smooth handover and an expensive week usually comes down to decisions made before production starts, not after the spa leaves the factory. Below is how we plan international delivery for Outdoor Swim Spa WS-SP600, and what your team on site needs to prepare.
Start with the spa itself, not the shipping date
WS-SP600 sits in our configurable swim spa and pool range, and the catalog lists it at 5900 × 2500 × 1600 mm with a swim training system, water jets, LED lighting and ozone sanitation. Those published figures are the starting point for the delivery plan; the final specification is confirmed order by order, because the options you choose change both the crate and the site works.
Model: WS-SP600
Catalog dimensions: 5900 × 2500 × 1600 mm
Control system: 1 set | Swim training system: 1 set
Filter pump: 1 pc | Jets: 6 pcs | LED lights: 4
Total power (as listed): 9.35 kW
Two of those lines drive everything else. Total connected power decides the electrical supply your electrician has to install, and a footprint close to six metres long with a 2500 mm width decides which truck, which crane or forklift, and which access route on site can actually move it. A spa that fits the drawing but not the gate is the most common avoidable problem in swim spa deliveries.
Confirm the configuration before the crate is designed
Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Each one has a delivery consequence:
- A heat pump and extra insulation add weight and change the cabinet build, so packing and lifting points are planned around the finished unit.
- Sand filtration means a separate media load on site — usually filled locally rather than shipped full.
- Steps and handrails ship as loose items and are packed so they cannot crush the acrylic shell in transit.
- Ozone and UV components travel with their own documentation for customs clearance.
We ask project customers to sign off the equipment list before production, because a change made after the packing design is fixed means re-cutting crates and rebooking the container slot. Our custom and OEM service covers these configuration choices together with finishes and branding, so the specification that reaches the factory floor is the same one your architect drew.
Choose the freight mode by site deadline, not by price alone
Our logistics and door-to-door delivery service covers sea, air and rail freight forwarding, customs paperwork, packaging and container loading, shipment tracking and delivery to the project address. For a swim spa, the practical choice is almost always sea freight in a container, for three reasons:
- The unit is bulky and heavy; air freight on a full shell is rarely economic.
- A 20- or 40-foot container lets the spa travel flat on its base with loose equipment consolidated alongside, instead of being handled repeatedly.
- Sea routings can be combined with other project goods — outdoor furniture, pergolas, loungers or interior fixtures from the same villa package — so one delivery window covers several trades.
Air freight does make sense for spare parts and late small items: a control board, a jet assembly or a replacement light. We keep that option open on project orders precisely so a site is never waiting weeks for something that fits in a carton.
On the paperwork side, expect commercial invoices, packing lists, certificates of origin and any import permits your country requires. Import duty rates, Incoterms, insurance cover and transit time are quoted case by case — we do not publish them as fixed numbers, because they depend on destination port, delivery address and the terms you contract for.
Prepare the site while the spa is in production
The single biggest cause of a delayed swim spa handover is site work that started too late. Send your builder and electrician this list at the moment the order is confirmed:
- Structure and drainage. A filled spa is extremely heavy. Confirm the terrace, deck or ground slab loading with your structural engineer, and set the base level and drainage before the unit arrives.
- Electrical supply. The listed total power for this model is 9.35 kW. Your local electrician sizes the circuit, protection and isolation to that load under local wiring rules — we do not certify work in your country, and requirements differ by site.
- Access route. Measure gate widths, turning radii and overhead clearances against the packed dimensions, and confirm where a crane or forklift can be positioned.
- Water fill and first clean-up. Plan who fills the shell, when the water supply is live, and how packing waste leaves site on the same day.
- Lifting equipment booking. Crane and forklift slots in residential areas are often booked days ahead; align them with the container arrival date agreed with our logistics coordinator.
Our installation and after-sales support covers on-site installation guidance, inspection and snags, spare parts and ongoing maintenance. Where local installers are used, we coordinate with them directly during the setting, filling and commissioning stages.
A delivery timeline that works backwards from your handover date
- Week 0 — specification sign-off. Model, options, finishes, electrical load and the complete equipment list are confirmed in writing.
- Production. Shell, cabinet, insulation and equipment assembly, followed by pre-shipment checks of the water system and controls.
- Packing and booking. Crate design for the confirmed configuration, container loading plan, and freight booking matched to your site readiness date.
- Transit and clearance. Shipment tracking through to destination port, with customs documents issued in advance so clearance does not wait on paperwork.
- Final mile and set. Delivery to the project address, offloading, positioning on the prepared base, connection, filling and commissioning.
- Snag list and handover. Joint inspection with your team; anything outstanding is recorded and closed out before the project is signed off.
We do not promise fixed transit days on a public page, because port congestion, customs queries and site access can all move a date. What we do commit to is one coordinator who owns production, packing, freight and installation contact for your order, rather than leaving you to chase four suppliers.
Common questions from project buyers
Can the spa ship together with other villa products? Yes. Swim spas are commonly consolidated with outdoor furniture, shading structures and interior fixtures under one turnkey project solution, which reduces delivery windows and damage risk.
What if a component is damaged at sea? Photograph the crate and contents before unpacking and send the images to your coordinator. Loose equipment, panels and jets can be replaced from stock; shell damage is handled through the cargo insurance arranged with the shipment.
Do you supply local electrical or structural certification? No. Site preparation and statutory certification are done by licensed local trades to your national and local requirements. We provide the equipment data those trades need.