A wall-mounted bar unit arrives on site as a crate, not as a shelf. Whether it hangs true against the wall months later depends less on the showroom finish than on how it was crated, blocked and documented for the journey from the factory to your project address. Below is what procurement teams, contractors and villa owners should confirm before goods leave, using Santerson Wall Mounted Bar Units as the worked example.
Why packaging matters more for a suspended cabinet than for a floor unit
A freestanding cabinet rests on its own base and can absorb a rough handling event through its plinth. A wall-mounted bar unit has no such relief. Its carcass carries glass shelves, a mirrored or lacquered back panel, interior lighting and door hardware, all of which are stressed by the same racking forces that a floor unit would shrug off. Two things follow from this.
- Racking is the main damage mechanism. Corner crush is easy to spot at delivery; a twisted carcass is not, and it only reveals itself when doors stop meeting their rebate on site.
- Fixings and brackets travel loose. The mounting system that decides whether the unit holds its alignment usually ships separately from the carcass, and a missing bracket stops installation even when the cabinet itself arrived flawless.
Santerson's wall-mounted bar units are made to measure for each space, with finish, layout and dimensions specified per project. That is exactly why packaging cannot be treated as a standard export routine: there is no off-the-shelf carton for a unit built around your reveal, depth and door configuration.
Six points to confirm in writing before production closes
Ask the supplier to state each of these on the proforma or packing specification. A verbal "we pack well" is not a confirmation.
| Point to confirm | What a good answer looks like |
|---|---|
| Crate type and blocking | Plywood crate or exported plywood case with internal timber blocking that holds the carcass square; corner protectors on every vertical edge; no reliance on carton alone for a glazed unit. |
| Glazing and shelves | Glass shelves, glass doors and mirror panels packed separately or interlayered with cushioning, individually edged-protected, and marked as fragile rather than left inside the carcass. |
| Hardware kit | Mounting brackets, rails, hinges, handles and adjustment hardware bagged, tagged to the unit reference and listed on the packing list, not buried in loose fill. |
| Panel and door identification | Every panel, door and scribe labelled with the unit and position reference that matches the shop drawing, so the installer knows which piece goes where without guessing. |
| Finish protection | Film or protective interleaf on lacquered, high-gloss, acrylic and veneer faces, since these show scuffing and pressure marks that a laminate surface hides. |
| Moisture protection | Wrap or desiccant appropriate to sea freight, relevant for timber carcasses, veneer panels and any engineered board in the build. |
Santerson's logistics service covers packaging and container loading as part of door-to-door delivery, alongside freight forwarding by sea, air and rail. That means the packing decision sits with the factory rather than with a third-party forward you would have to brief separately — which is convenient, but it also puts the burden on you to specify what "packed" means before the case is closed.
Documentation that travels with the crate
Packaging claims are only useful if the paperwork lets you check them at both ends of the journey. For a wall-mounted bar unit ordered on a made-to-measure basis, request:
- A packing list that itemises each case by net and gross weight, dimensions and piece count, with hardware kits listed as separate line items.
- Crate markings showing the project reference, unit reference and case number out of total, so a partial delivery is obvious on arrival rather than discovered during installation.
- Photographs of the closed crates taken before container loading. For a custom run this is the cheapest evidence you will ever have about the condition of goods at despatch.
- The commercial invoice, packing list and certificate of origin as part of the shipment paperwork — documents Santerson's logistics service lists among the customs paperwork it handles.
If cargo insurance is being arranged, confirm that the insured value covers the replacement cost of a made-to-measure unit rather than a nominal declared value. A standard cabinet can be re-ordered; a wall-mounted bar unit cut to a specific opening cannot be replaced quickly.
Container loading and the site receiving plan
Two questions decide whether careful crating survives the last leg. First, where the case sits in the container: a heavy bar unit crate stacked under a loose bundle of panels will be crushed, and mixed loads shift in transit. Ask how the unit is loaded and secured, and whether it ships with other cabinetry from the same project so that like-for-like cases travel together.
Second, who receives it. A wall-mounted bar unit usually arrives while the bathroom, kitchen or living area is still open to trades. Agree in advance where crates are opened and stored flat and dry, and inspect within the claim window rather than at handover weeks later. Photograph any damaged case before removing the contents — a crushed corner with no photograph is very hard to attribute afterwards.
Working with a one-stop supplier on packing scope
Packaging questions surface specification gaps. If the crate label refers to a panel size that does not appear on your drawing, or if the hardware kit assumes a substrate your wall cannot carry, both problems were resolvable at the quotation stage. Raise mounting substrate, access route and case size in the same conversation as the finish and layout sign-off, rather than after production starts.
The same logic applies across the rest of the joinery package. A project that orders Santerson Integrated Bar Systems alongside kitchen cabinetry and panelling should agree one packing and labelling convention for all three, so the site team is not decoding three different case-marking systems on the same day. Where a floor-standing alternative suits the layout better, Santerson Compact Bar Cabinets can be specified instead, and its crating requirements differ accordingly.
Because Santerson presents itself as a one-stop supplier for furniture and building materials, with services that include custom/OEM work, logistics and door-to-door delivery, and installation support, the same team can be asked to align packing, case marking and delivery scope with the specification they produced. As with any made-to-measure order, confirm which parts of that scope apply to your project before production closes.
Questions buyers most often ask
Can the carcass be shipped assembled, or knocked down?
Ask which applies to your unit. An assembled carcass in a blocked crate needs less on-site work but takes more volume; a knocked-down pack is cheaper to ship but puts the alignment burden on site assembly and on the quality of the fixings kit. Both are legitimate, and the choice should be stated on the order.
Should I ask for glass shelves fitted or separate?
Separate, individually protected and clearly marked. Shelves left loose inside a transit crate are the most common source of breakage claims in glazed cabinetry.
What if part of the delivery is missing?
This is why case-number-of-total marking matters. Note it on the delivery note at the moment of receipt, photograph the cases, and raise it immediately — a hardware shortage discovered during installation is far harder to resolve than one recorded at the dock.
Confirm before goods leave, not after
The packaging conversation costs nothing while the order is still open and becomes expensive the moment a crate arrives on site. Put the six points above in writing, require itemised paperwork and pre-loading photographs, and plan who inspects and where. For made-to-measure Santerson Wall Mounted Bar Units, that short list is the difference between a unit that hangs true for years and one that needs re-fixing before the client has even moved in.
To agree packing specification, case marking and delivery scope for a specific project, contact Santerson directly: Contact Us.