Glass partitions sit in an awkward place on most project schedules. They are measured on site, made to order, and they have to arrive in one piece. When the supplier is several thousand kilometres away, the difference between a smooth handover and a re-order usually comes down to how much specification detail was locked down before production started. This guide walks through sourcing glass partitions from an overseas manufacturer — what to ask for, what to confirm in writing, and where the common problems come from.

Start with the scope, not the catalogue

Before you compare finishes or hardware, decide which job the glazing is doing. A fixed screen that separates a bedroom from an ensuite behaves very differently from a sliding panel system that closes off a meeting room, and both differ from a full-height wall that closes off a meeting area. At SANTERSON these sit in separate collections — Glass Partitions within Custom Partitions & Paneling, and Glass Sliding Panels and Partition Sliding Systems within Sliding Panel Systems. Naming the system type in your enquiry, rather than just "glass partition", is what lets a factory quote something you can actually compare.

It is also worth deciding early whether the glass is the only item you are buying. If the same supplier is producing vanities, wall panelling and doors for the same wet area, one coordinated set of drawings removes a whole category of site problems — floor levels that do not match threshold heights, or an opening that shifts by a few millimetres between the tiler and the glazier.

What a workable enquiry actually contains

Overseas quotations drift apart because buyers send different amounts of information to each factory. Send the same six items to every supplier and the numbers start to line up:

  • Opening dimensions, taken on site — width and height at several points, plus floor level and any finished-wall build-up.
  • A layout sketch or marked-up plan — where the panels sit, where the opening is, which side the door hinges or track runs to.
  • Glass type and thickness — clear, frosted, tinted or ribbed, and whether the assembly needs to be toughened.
  • Hardware expectation — frame colour, handle style, track type for sliding sets, and whether hinges are included in the price.
  • Quantity and unit of measure — per set or per square metre, stated the same way for every supplier.
  • Delivery terms — port of destination, and whether you want a door-to-door quotation or an FOB figure you will freight yourself.

Configurable listings on most manufacturers' websites — ours included — state made-to-measure sizing and material and finish options rather than fixed dimensions. That is deliberate: the panel size follows your opening. It also means a specification sheet signed off before production, not after, is the document that protects you.

Reading the quotation: what tends to be left out

Two quotations for "the same" partition can differ by a wide margin because of inclusions rather than price. Check each line against this list:

  • Glass safety specification. Ask explicitly whether the panels are toughened and how the edges are finished. Where a partition borders a bathroom or a floor-to-ceiling installation, the safety requirement should be confirmed with the manufacturer for that specific project rather than assumed from a catalogue page.
  • Track, runners and structural support. Sliding systems need a head track and a floor guide; some need a fixed panel to carry the load. If the quotation does not mention them, ask who supplies what.
  • Seals, channels and fixings. The visible hardware is rarely the expensive part — it is the perimeter channel and seal detail that decides whether the install looks built-in or improvised.
  • Packaging method. Glass travels in glazed crates with corner protection. Ask how panels are packed and how the crate dimensions compare to your container mix; a partition shipment can waste half a container if it is loaded badly.
  • Spare panels and replacement glass. On multi-unit jobs, ask what a replacement panel costs after delivery, and how long that lead time is.

Combining partitions with the rest of the fit-out

Where a project needs glass alongside other finishes, consolidating with one furniture and building materials supplier cuts the number of interfaces you have to manage. A bathroom wall might carry a glazed partition, wall panel systems, matching glass sliding doors to the wardrobe run, and a vanity with an integrated countertop and basin. Sourced separately, each supplier works from their own drawing set and the junction details get resolved on site by whoever turns up first. Sourced together, the same production team sees all four items and the reveal between glass and panel is drawn before anything is cut.

SANTERSON has been manufacturing furniture and building materials in China since 2008, with custom and OEM work across hospitality, villa and office projects. Our service covers design consultation and space planning, material selection and product specification, production and quality control, project management, door-to-door logistics and on-site installation support. For buyers who need a partition to match a veneer or a lacquer finish specified elsewhere in the job, that single chain is usually the practical reason to consolidate — not price.

Production, packing and shipping: the questions that matter

Ask the manufacturer how the glazing will be staged. On a made-to-measure order, three checkpoints are worth insisting on: confirmation of final dimensions after the site is tiled and levelled; approval of a drawing or sample showing glass type and hardware before cutting; and photographs of the packed crates before the container is loaded. None of these take long, and each one costs far less than a re-production.

On freight, decide who owns the movement. A door-to-door quotation covers freight forwarding by sea, air or rail, customs paperwork such as commercial invoices, packing lists and certificates of origin, and delivery to site. An FOB figure leaves that with you or your broker. Import duties, insurance and transit time vary by destination and should be confirmed for your specific shipment rather than taken from marketing copy — this is where buyers get burned, because the number quoted at enquiry stage is rarely the number on the final invoice.

Receiving and installing

Inspect before the crates leave the delivery vehicle. Count crates against the packing list, check for transit damage on the crate faces, and photograph anything questionable while the carrier is still present. Then let the installer confirm opening sizes against the shop drawings before any panel is lifted into place — a 10 mm floor build-up discovered after delivery is the most common cause of a failed glass installation.

Agree the snag process in advance: who signs off the alignment of sliding panels, who adjusts hardware, and what happens if a panel needs replacing. Warranty terms and response times differ by supplier and region, so get them in writing for your project rather than relying on a general claim from a website.

A short checklist before you place the order

  • Site dimensions re-taken after flooring and wall finishes are complete.
  • Glass type, thickness and safety requirement confirmed in writing for this project.
  • Hardware list agreed — track, hinges, handles, seals, channels.
  • Approval drawing signed before production begins.
  • Freight terms, insurance and delivery address stated on the order.
  • Warranty scope, spare-panel pricing and installation support confirmed for your country.

Sourcing glass partitions overseas is not difficult — it is simply unforgiving about incomplete information. Fix the specification early, put every inclusion in writing, and keep the partition with the rest of the joinery package where the finishes have to match. Send us your drawings at SANTERSON and we will quote against them.