An island walk-in wardrobe looks simple in a render and complicated on site. A freestanding unit in the middle of the room touches circulation, sightlines, services, finishes and delivery access all at once. When a buyer sends only a floor area and a mood board, the quotation that comes back is a guess, and the guess is paid for later in variations. A written product specification removes that risk. Below is the field-by-field structure we use to turn Island Walk in Wardrobes into a buildable, quotable package for villa projects and residential fit-outs.

What the specification actually has to settle

A product specification is not a brochure. It is the document that lets a factory, a site contractor and a buyer read the same numbers. For an island wardrobe, it answers four questions before anyone talks about price:

  • What are the outside dimensions of the island, and how much clearance does each side need for doors and drawers to work?
  • What goes inside the carcass — hanging heights, drawer bank, shelving, trays — and at which levels?
  • Which material and finish is on each visible face, including the top surface and the plinth?
  • How does a built-up unit arrive on site, through which opening, and who assembles it?

Every item in this article maps to one of those four questions. If your draft specification leaves a question unanswered, the supplier will answer it for you — usually with whatever they already produce.

Field 1: Footprint, height and clearance

Island units are made to measure, so the drawing governs everything. Send the overall width and depth of the island, the finished top height, and — separately — the walkway dimensions on each side. Walkways decide whether a drawer can be pulled out with someone standing behind it, and whether a hinged or sliding door on an adjacent wall run stays usable.

State which faces of the island are visible from the room entrance. A four-sided island usually carries different interior zones on each face, and one face may be finished as a plain panel because it faces a wall.

Item to specifyWhy the supplier needs it
Overall width, depth and top height of the islandSets carcass size, panel cut list and transport segments
Clear walkway on each sideConfirms door swing, drawer pull-out and usable access
Floor finish build-up at the island positionDetermines plinth height and whether the unit sits level on a screed or a finished floor
Which faces are exposedDetermines how many sides receive decorative finishing
Room ceiling height and lighting positionsAffects whether a low island is preferable to a tall unit that blocks sightlines

Field 2: Interior layout and storage zones

Draw the interior elevation for each face, not just a plan. Mark hanging sections with their clear drop, drawer banks with the number of drawers, open shelving with shelf spacing, and any display area where items will be seen through glass or left open.

If part of the room is intended to read as an Open Walk in Wardrobes zone — open shelving and rails rather than closed doors — say so explicitly, because open sections need cleaner interior finishing on the back panels and more considered shelf spacing. Where the room is arranged around a corner, an L Shaped Walk in Wardrobes run often pairs with the island; in that case specify how the two elements relate — aligned heights, matching finish, and a defined gap or a joined joint.

  • Hanging zones: single hang, double hang, or tray rails, with clear heights for each
  • Drawer bank: number of drawers, drawer depth, and which face they open from
  • Shelving: shelf count, spacing, and whether shelves are fixed or adjustable
  • Display: glass-fronted or open sections, and what will be shown in them
  • Small items: trays, dividers, jewellery inserts, laundry provisions
  • Lighting: interior light sources, switch position, and where the transformer is allowed to sit

Confirm dimensions and selected specifications for each project before production. The figures in your drawing are the ones we build to.

Field 3: Materials, finishes and hardware

Our island walk-in wardrobe range is offered with material and finish options rather than a single fixed board, so the specification should name the finish for each surface separately. A common mistake is specifying one colour and assuming it applies to the top, the interior carcass and the plinth.

  • Carcass: panel type and colour on interior faces
  • Exterior panels: finish on each exposed face, matched to the rest of the joinery package where relevant
  • Top surface: whether the island top is a workable surface, a display surface, or both — this drives material choice and edge detail
  • Glass: if glass fronts are used anywhere in the room, name the glass type and frame finish
  • Hardware: drawer runners, hinges, handles or handleless profiles, and soft-close requirements
  • Plinth: height, recess, and material

Where the island must match cabinetry elsewhere in the same project, send the existing specification or a sample reference instead of a colour name. Colour names travel badly between factories.

Field 4: Delivery route and installation

This is the field most often left out, and it causes the most expensive surprises. A made-to-measure island arrives as panels and assembled sub-sections depending on size, and every piece has to pass from the vehicle to the room.

  • Confirm the access route: door widths, corridor turns, lift dimensions or stair flights
  • Confirm who prepares the site — floor level, completed wall finishes, first-fix electrical for interior lighting
  • Confirm who installs: installation support covers on-site assembly and inspection; a local builder typically prepares the room
  • Confirm packaging expectation for the shipping method you have chosen

For buyers coordinating wardrobes alongside other joinery, flooring and fixtures, this part of the specification is where Turnkey Interior Project Solutions earn their keep — one supplier sequences cabinetry, delivery and installation instead of three trades negotiating on site.

A specification sheet you can copy

SectionWhat to write in it
Project and roomRoom name, floor level, drawing reference and revision number
Island dimensionsOverall width, depth, top height, plinth height, exposed faces
ClearancesWalkway on each side, door swing interaction, drawer pull-out zone
Interior layoutElevation per face: hanging heights, drawers, shelves, display, trays
FinishesCarcass, exterior panels, top surface, glass, plinth — each named separately
HardwareRunners, hinges, handles or profile, soft close, locks if required
LightingFitting type, position, switch location, power feed and transformer access
Access and deliveryRoute dimensions, lift or stair limits, delivery window
ResponsibilitiesSite preparation, installation party, inspection and handover sign-off
Confirmation pointDate when drawings are frozen for production
Send the finished sheet with a floor plan, an elevation of each island face, and the access route sketch. That combination is what allows a supplier to return a firm quotation and a fabrication drawing rather than a price range.

Common specification gaps we see on enquiries

  • No clearance dimensions. The island fits the room but blocks a door or a drawer in daily use.
  • One finish named for all surfaces. Interior carcass and top surface then arrive in a cheaper board than expected.
  • Interior layout left to the supplier. Hanging heights do not match what the client actually stores.
  • No access route information. A large assembled section cannot reach the room, forcing on-site rework.
  • Electrical provision missing. Interior lighting has no feed, so it is added after the ceiling and walls are complete.

Each gap costs little to close at enquiry stage and noticeably more after production starts. The Interior Design Services team can take a project brief and produce the layout drawings, renderings and production coordination around them, which is often the faster route for buyers who have the room but not the joinery detail.

Frequently asked questions

Can an island wardrobe be made to any size?

Yes. Island walk-in wardrobes are made to measure, with layout, dimensions and finish options specified per project. Practical limits come from room access and the transport route rather than from the design itself.

Should the island be low or full height?

A low island keeps sightlines open and works as a display and drawer zone; tall storage usually moves to the wall runs. The choice depends on room size, ceiling height and where you want hanging storage, so specify both options in the drawing if you are undecided.

Can the island match my existing cabinetry?

Yes, when the specification carries the actual panel reference or a sample. Send the finish code from the original supplier where one exists.

Who installs the unit?

Installation support is available for these projects, with on-site assembly and inspection. Site preparation — floor level, wall finishes and electrical first fix — stays with the local contractor and should be listed in the specification's responsibility table.

Next step

Start from the product page for Island Walk in Wardrobes, attach your plan and elevations, and use the specification sheet above as your cover document. A complete enquiry allows us to confirm feasibility, finish options and a firm price in one pass instead of several rounds of questions.