A double basin countertop looks simple on a drawing: one long run of stone, two basins, some cabinetry below. On site it is where three or four suppliers meet — the vanity carcass, the counter slab, the basins, the taps and the waste pipework. When those come from different factories, every gap between them becomes somebody's problem at handover. Shortlisting the right SANTERSON manufacturing partner is what keeps that interface under one roof, and it starts with knowing exactly which questions to put to a supplier before you compare prices.
Start with the scope you actually need covered
Most procurement failures on bathroom joinery begin with an incomplete enquiry. A Santerson Double Basin Countertop can be supplied as part of a wider run that includes the vanity below it, or as a standalone slab with basins set into it. Those two scopes are quoted and produced very differently.
Before you send an enquiry, decide which of these you are buying:
- A made-to-measure double vanity with the countertop integrated — see Santerson Double Vanity and Santerson Integrated Countertop Vanity.
- A countertop with basins set into it — undermount, vessel or integrated, each needing a different cutout and support detail.
- Surfaces alone, from the Santerson Stone & Marble Surfaces range, fabricated to your template.
A supplier who can cover all of it removes the handover risk between trades. That is where a one-stop furniture and building materials supplier earns its place on a shortlist: one factory drawing, producing and packing the carcass, the counter and the basins together, so fall heights, tap holes and overflow positions are settled in one production file instead of three.
Six checks that separate real manufacturers from traders
| Check | What to ask for | Why it matters |
|---|---|---|
| Made-to-measure capability | Confirmation that dimensions, layout and finish are specified per project rather than chosen from fixed sizes | Double-basin runs rarely fit standard widths; two equal basins need a centred, symmetrical cutout |
| Material and finish range | Written list of the stone, engineered surface, laminate and lacquer options they can actually produce | The finish you specify must be repeatable across every bathroom in a villa or apartment lot |
| Cutout and fit responsibility | Who signs off basin spacing, cutout dimensions and countertop compatibility | Undermount, vessel and integrated basins each have their own cutout and support requirement |
| Custom and OEM service | Whether bespoke finishes, prototyping and private labelling are offered, and at what order quantity | Project-specific tones and hardware usually need a prototype before batch production |
| Logistics scope | Freight mode, packaging, container loading, customs paperwork and delivery point | Stone tops and ceramic basins break in transit if packing is not specified at the factory |
| After-handover support | What happens on site when a unit arrives damaged or a dimension is wrong | Replacement lead times decide whether your practical completion date holds |
Ask each candidate the same six questions in writing. The answers are easy to compare side by side, and vague replies surface immediately — which is the point of a shortlist rather than a long list.
Read the specification sheet before the price sheet
Product pages for the Countertops & Basins collection describe configurable items whose finish, layout and dimensions are set per project. That is a genuine advantage on bespoke work, but it also means nothing on the page is fixed until you confirm it. For each configuration, get written confirmation of:
- Overall length, depth and thickness of the counter, plus the fall to the wall and any upstand.
- Basin type — Santerson Undermount Basin, Santerson Vessel Basin (Above Counter) or integrated — and the exact cutout drawing that goes with it.
- Basin spacing from each end and from the centre line, tap hole positions, and overflow provision.
- The substrate and edge profile under the visible surface, and how the front edge is finished.
- What is included in the price: taps, wastes, traps, brackets, sealant and any cut-out service.
Score the shortlist on coordination, not just cost
Once three or four candidates reply, score them on how the work would actually be run. A turnkey furniture and building materials company that also supplies vanities, wall panelling, flooring, lighting and doors can coordinate a whole bathroom package from one production schedule, which matters when the same detail repeats across several bathrooms or several villas. Their design and coordination service covers space planning, drawings, production coordination and on-site guidance — stages you can map directly onto your own programme.
Then test the practical things:
- Does one named person hold the drawing, the production slot and the shipping booking, or do you chase three departments?
- Can they supply matching vanities, mirror cabinets and vanity lighting in the same finish, so the joinery package arrives together?
- Have they shipped to your country before, and what paperwork do they handle at their end?
- Is a prototype or first-article unit available before you commit to the full quantity?
Australian projects are well represented in the site's published case references — villas in Sydney, Melbourne, Perth, Willoughby and North Turramurra. Those references show relevant experience; they do not by themselves prove local stock, installers or compliance certification, so confirm import terms, duties and installation arrangements for your own project rather than assuming them.
Common shortlisting mistakes
- Comparing unlike quotes. One price includes the cutout and basins, another is slab only. Normalise the scope before you rank anything.
- Accepting a rendering as a specification. A picture of the range is not a drawing of your unit; insist on dimensioned drawings signed back to your survey.
- Ignoring the waste and tap interface. Two basins, two wastes and one or two tall taps need wall or counter clearances agreed before the slab is cut.
- Buying per room instead of per project. Splitting bathrooms across suppliers saves a small unit rate and multiplies the coordination cost.
Frequently asked questions
Can a double basin countertop be ordered without the vanity below it?
Yes. The collection includes standalone counter and surface items alongside vanity units, so you can order the top on its own or as part of an integrated unit — but the cutout drawing must still be agreed with whoever fabricates the carcass.
Which is easier to specify, undermount or vessel basins?
Undermount basins need a precise cutout and support detail below the counter; vessel basins sit above it and shift the tap and clearance requirement instead. Neither is harder overall — they just move the critical dimension, so pick one per project and detail it consistently.
Where the supplier conversation should start
Send the same pack to every shortlisted manufacturer: a room elevation with your survey dimensions, the basin type you have chosen, the tap and waste arrangement, and the finish reference. Ask each supplier to return a dimensioned drawing of the exact unit before quoting. A factory that answers with a drawing is telling you it will build to your specification; one that answers with a catalogue price list is telling you something else.
That single step filters the shortlist faster than any comparison of unit rates, because it reveals made-to-measure capability, drawing discipline and communication speed all at once — the three things that decide whether a double basin countertop arrives ready to install or becomes the item holding up your bathroom handover.
For project enquiries, drawings review or a made-to-measure quotation on vanities, countertops and basins, contact SANTERSON directly through the contact page.