A two tone acrylic kitchen can look convincing in a render and disappointing on site. The difference is usually decided before production starts, in how the samples were approved and what the proposal actually committed to. If you are sourcing cabinetry for a villa or apartment project, here is how to put two proposals side by side and reach a defensible decision.
Start From the Drawing, Not the Colour Card
Our Two Tone Acrylic Cabinets are made to measure, with the material, finish and layout specified for each project. That means a quotation is only as comparable as the drawing behind it. Before you compare prices, check that both proposals were priced from the same elevation drawings: overall run lengths, tall-unit heights, appliance housings, and whether island carcasses are included or excluded.
Ask each supplier to state, on the same sheet, which units carry a front and which are carcass only. Two tone schemes often mix a high sheen front with a matte coordinating front, and a supplier can quietly move a door from one group to the other between revisions.
What a Fair Sample Should Show You
Request physical samples rather than printed swatches, and ask for three pieces per supplier so the comparison is honest:
- A front panel in each of the two finishes you have chosen, large enough to judge at arm's length.
- An edge detail showing how the finish wraps the door edge and whether a joint line is visible.
- A cut corner or offcut showing the substrate and how the finish is bonded to it.
Judge the sheen under the lighting you will actually install. A gloss acrylic that reads as warm cream in a showroom spot can turn cold and grey under cool white LED strip in a tall unit. View the sample standing at kitchen height, not flat on a table.
Read the Proposal Line by Line
| Item to check | Why it changes the comparison |
|---|---|
| Carcass and drawer boxes | Board type, thickness and edge banding are where cheaper quotes quietly save money. |
| Hinges, slides and lift systems | Brand and closing mechanism are often quoted as "as per standard" on one side and named on the other. |
| Tall and corner units | Corner access fittings and integrated appliance doors are frequently priced separately or omitted. |
| Finish split between the two tones | Confirm which doors sit in each finish, and how many panels of each are included. |
| Lighting and trims | Integrated cabinet lighting, profiles and diffusers may be an accessory line rather than part of the unit price. |
| Scope of service | Design coordination, production, freight, installation and after-sales should all be stated explicitly. Our one-stop solution covers specification, manufacturing, project management and site coordination in one scope. |
Where a supplier offers custom and OEM work, ask them to confirm in writing which dimensions, finishes and hardware can actually be changed for your run. Bespoke changes are valuable, but they need to be priced and recorded as part of the order.
Compare How Each Supplier Handles Variation
Two tone schemes fail most often at transitions: where a gloss run meets a matte run, around an integrated fridge, and at the ceiling line of a tall unit. Ask both suppliers how they resolve these three details and whether the resolution is drawn or left to the fitter. A proposal that shows transition details has usually been thought through; one that does not will generate site questions later.
Also ask what happens if a panel is damaged in transit or a colour batch differs slightly on delivery. Spare panels, replacement terms and who covers them should appear in the document, not only in email correspondence.
A Simple Approval Checklist
1. Both quotes priced from identical, dated elevation drawings.
2. Physical samples of both finishes received, reviewed under project lighting.
3. Edge and substrate detail inspected, not just the face.
4. Hardware brands and closing mechanisms named in both quotes.
5. Omissions listed as clearly as inclusions.
6. Freight, installation and after-sales scope written into the agreement.
7. Approved sample reference recorded on the purchase order.
Look Beyond the Kitchen
If the same two tone language should continue into bedrooms and utility rooms, specify those joinery items in the same package. Our Two Tone Acrylic Wardrobes are made to measure on the same basis, so doors, trims and finishes can be coordinated across the whole project instead of matched after the fact. Coordinating cabinetry and wardrobes with one furniture and building materials supplier also reduces the number of handovers you have to manage on site.
Send us your drawings and the two proposals you are weighing up, and we will confirm scope, finishes and hardware line by line before production begins.