A guest room wardrobe is one of the most handled pieces of furniture in a hotel, yet it is often specified late in a fit-out and then ordered off-plan. White acrylic wardrobes are a common choice for bright, contemporary guest rooms and serviced apartments, and they can work well when the finish, the carcass, the internal layout and the delivery route are all confirmed before production starts. The steps below follow how our team actually processes wardrobe enquiries for hotel and apartment projects, from the sample stage to handover.

What “acrylic” means on a wardrobe door

On our wardrobe range, acrylic describes a high-gloss or low-sheen decorative surface laminated onto a board door. The substrate and edge treatment are decided separately from the colour, which is why two doors in the same "white" can behave very differently on site.

  • Surface sheen. A mirror-high acrylic reflects light across the room and reads bright in small guest rooms; a softer acrylic finish reduces visible fingerprints and swirl marks in corridors with heavy housekeeping traffic. Our catalogue lists glossy and matte acrylic wardrobes as separate options, so specify the sheen you want rather than assuming it.
  • Substrate and edges. The board behind the acrylic sheet and how the edge is closed determine how the door tolerates humidity changes and knocks from luggage. Ask for a cut sample so you can see the edge build, not just the printed face.
  • Tone matching. White is not one colour. Matt white, warm white and cool white acrylics sit differently against paint, stone worktops and carpet, and different batches of gloss sheet can shift in tone. Fix the tone against your other finishes at sample stage and keep the approved reference on the purchase order.

Decide the wardrobe type before the finish

Finish choice is easy; the door mechanism and layout are what drive cost, room clearances and installation time. For a typical guest room we ask the buyer to settle three questions first.

1. Sliding or hinged

Sliding doors save the swing arc, which matters in compact rooms where the bed and bathroom door compete for floor space. They need a wall run that is long enough for the panels to stack, plus clearance above and beside the opening for the track. Hinged doors give full simultaneous access to the interior and are simpler to service, but they need clear floor space in front of them. Where a hinged wardrobe sits on a niche or angled wall, our hinged door wardrobes and corner layouts are usually the practical answer.

2. Built-in or freestanding

Built-in joinery fills floor-to-ceiling and closes to the wall, which suits new-build and full-refurbishment packages where wall lines are still being set. Freestanding units travel as finished pieces and install faster in a phased refurbishment where wet trades have already finished. In mixed projects we often combine both: built-in wardrobes in the suites, freestanding or modular units in standard rooms.

3. Internal layout by room type

Layout should follow how guests actually use the room, and it differs between a short-stay hotel and a serviced apartment held for weeks.

Room typeLayout we usually recommend
Short-stay guest roomA short hanging rail for shirts and jackets, one shelf stack, a luggage zone at the base, and a safe shelf at a comfortable working height.
Serviced apartment / long stayTwo hanging heights so garments do not need folding, drawer zones for personal items, and a shelf bay sized to the guest's cases.
Villa master bedroomA wider open or walk-in wardrobe layout with dressing surface, plus closed storage to keep the room visually quiet.
Staff and back-of-houseSimple shelving and hanging with lockable doors; finish grade is stepped down here so the budget stays on guest-facing rooms.

Every unit we make is made-to-measure, so the layout above is a starting point rather than a fixed module. Share your room drawings and we will return a layout for each room type in the schedule.

What to confirm on the sample before you place a room-by-room order

  • A physical door sample showing the acrylic face, the edge closure and the substrate, kept in your project file as the approval reference.
  • The exact white tone checked under the guest room's own lighting, since LED fittings shift cool whites visibly.
  • Door size limits for the mechanism you chose, and how the panel behaves at full hanging load over a full-height door.
  • Hardware specification: hinge or sliding gear brand, soft-close where required, and the handleless option if you want a seamless front.
  • Internal fittings — rail positions, drawer counts, shelf depths — recorded on a dimensioned drawing signed off by your design team.
  • Finish pairing across the room. Where one scheme needs both bright and quiet surfaces, two tone acrylic wardrobes let a light carcass sit with a darker door in the same production run.
  • Packaging and pallet build for your delivery sequence, so rooms can be fitted floor by floor instead of storing crates in corridors.
Practical note: gloss acrylic shows handling marks during installation. We recommend housekeeping gloves and a final clean after the carpenters leave, and we ship protective film on the visible faces for that reason.

Ordering as part of a wider fit-out package

Wardrobes rarely fail on their own; they clash with what was delivered around them. Flooring heights, skirting, door openings, lighting positions and the joinery schedule all have to agree before the wardrobe drawing is released. As a hotel furniture and fit-out supplier, we produce wardrobes alongside the cabinetry, doors, wall panelling, bathroom fixtures and loose furniture for the same project, which means one team coordinates the schedules instead of several suppliers each working to their own drawing set. Our custom and OEM service covers bespoke sizes, finishes and layouts; freight is arranged door-to-door with the paperwork handled on our side; and installation and after-sales support follow the delivery.

Where a project needs wardrobe fronts to match bedroom doors or media walls, we can also produce those elements in the same finish, which removes most of the tone-matching risk described earlier.

A short checklist for procurement teams

  • Room schedule with wardrobe type, door mechanism and internal layout per room category.
  • Approved physical sample of the acrylic face, edge and white tone, referenced by code on every order.
  • Dimensioned drawings signed off against the final wall and floor finishes.
  • Hardware list with soft-close and handleless options confirmed.
  • Delivery sequence matched to the site programme, plus storage plan if rooms are not ready.
  • Snag and handover process agreed before installation starts.

Send us your room schedule and drawings and we will quote a wardrobe package by room type, with the sample stage completed before production is committed. More about this product range: White Acrylic Wardrobes.

Talk to our project team about wardrobe joinery for your hotel or apartment package. Contact: PHILLIP, Phone/WhatsApp +86-13928214007, Email santerson@qq.com.