A swim spa is not a shelf item you can order off a catalogue page and forget about. For a model such as the Outdoor Swim Spa WS-S06C, the difference between a smooth handover and a stalled site programme usually comes down to what the supplier can document before you pay a deposit. The checks below are the ones we would put in writing, and they work just as well for other models in the outdoor swim and hydrotherapy range.
1. Confirm the exact specification of the model you are quoting
Start with the numbers on the product page, then ask the supplier to restate them against your enquiry. For the WS-S06C, the published catalogue lists a shell of 5880 × 2380 × 1400 mm, three water pumps, one filter pump, 33 jets in total, two LED lights and a total power figure of 9.95 kW, with water jets, temperature setting, LED lighting and ozone shown as the fitted features.
Two details in that list deserve attention before you circulate a quotation internally. A swim training system is not listed for this model in the published specifications, even though it appears on closely related models in the same series — so if your client expects lap swimming against a current, ask explicitly whether it is included, optional or not offered for WS-S06C. The total power figure also drives everything downstream: distribution board size, circuit protection, and whether an electrician or a heat pump changes the load. A supplier who answers with "standard configuration" has not answered at all.
2. Ask what is standard, optional and excluded
Catalogue-listed options for this range include control systems, UV sterilisation, additional water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so the question to put to a supplier is not "do you offer a heat pump" but "which heat pump pairs with WS-S06C, what does it add to the power draw, and how does it affect running in your climate". The same applies to insulation and steps: they change both the delivered price and the site preparation.
Write the answer into a line-item schedule. A quotation that bundles everything into one figure makes it impossible to compare two suppliers on the same basis, and it is where disputes about "that was not included" begin.
3. Check how the product reaches your site
A swim spa arrives as a heavy, oversized unit that needs a crane or gantry, a prepared base and a clear access route on the day. Ask whether the supplier handles packaging and container loading, freight by sea, air or rail, customs paperwork such as commercial invoices, packing lists and certificates of origin, and door-to-door delivery to the actual address rather than the nearest port. Our logistics service covers these steps, but you should still confirm Incoterms, duties, insurance cover and the delivery point in writing for your own project — terms differ case by case.
Then check who is at the other end. Someone on the supplier's side should be tracking the shipment and answering questions while it is in transit; a manufacturer that disappears after the container leaves is a risk you carry yourself.
4. Test technical support before the order, not after
Send two technical questions early and judge the quality of the replies: what electrical supply the WS-S06C needs on site, and what base or subframe preparation the installation requires. Suppliers who work on villa and hospitality projects answer these with drawings and site notes; suppliers who only sell product answer with a brochure. Our project work runs through design consultation and space planning, production coordination, logistics and on-site guidance, which is why we treat those questions as part of the sale rather than support after it.
Ask in the same breath what happens when a pump, control board or jet fails two years from now: which spare parts are held, how they are shipped, and who does the on-site inspection and snag list at handover. Vague answers here are an early warning.
5. Verify that the supplier can build around your space
A standard shell dimension is not always the right answer for a terrace, courtyard or resort deck. Where the layout demands it, ask whether the manufacturer can produce a different footprint — our Customizable Shape Outdoor Spa line, for example, supports square, round, oval and curved designs in an acrylic shell with structural reinforcement, for gardens, terraces and leisure areas. A supplier willing to model your dimensions before production is usually also the supplier who will coordinate correctly during it.
If the swim spa sits inside a wider package — outdoor furniture, paving, wall panels, lighting, cabinetry — check whether one supplier can carry several of those scopes. Coordinating one contract across the wet area and its surrounding landscape removes a whole category of interface problems. Our Swimming Pools and Swim Spas range sits alongside the rest of our furniture and building materials catalogue for exactly that reason.
A short pre-order checklist
- Specification sheet for WS-S06C restated against your enquiry, including jet count, pump count and total power.
- A clear yes or no on the swim training system and on every option you intend to buy.
- Electrical requirement stated in kW plus the supply assumption behind it.
- Line-item quotation with standard, optional and excluded items separated.
- Named Incoterms, delivery address, insurance position and customs documents.
- Base and access requirements for the installation site, in writing.
- Spare-parts availability and the process for warranty claims after handover.
Talk to us about your swim spa scope: contact SANTERSON. We manufacture outdoor swim spas, outdoor furniture and building materials in China and deliver project packages internationally.