A glass shelf looks like the simplest item on a bathroom schedule — until it arrives on site and does not clear the basin tap, sits too high for the guest to reach, or cannot be fixed safely to the wall behind the tile. On a residential or hospitality fit-out, shelving is a small component with an outsized effect on snagged schedules. The Santerson Glass Shelves are made-to-measure items in our Open Shelving collection, and their specification depends entirely on information only you can supply: the room, the substrate, the loads and the finish. This guide sets out exactly which measurements and project inputs to send so that the shelves we produce fit the first time.
Why Glass Shelving Needs Project-Specific Inputs
Stock shelving is sold in fixed sizes and then adjusted on site with packing, cutting or improvisation. Our Santerson Glass Shelves work the other way round: dimensions, layout and finish are set to the space before production, so the unit arrives ready to install. That approach only pays off when the numbers behind it are accurate and complete.
Three things make glass shelving more sensitive than most bathroom accessories. First, glass is specified by size and edge treatment together — a shelf that is 20 mm too deep may be unusable, whereas a timber shelf can be trimmed. Second, the load path runs through the brackets and into the wall, so the substrate matters as much as the shelf itself. Third, in a shared bathroom the shelves sit in the same splash zone as the basin, shower and towel rail, so heights clash easily with mixers, spouts and door swings. Sending good inputs at enquiry stage removes all three risks at once.
Measurements to Take Before You Enquire
Take dimensions from the finished wall face, not the structural wall, and note whether tiling, plasterboard or a panel system is already set out. If finishes are still pending, state the build-up thickness so we can allow for it.
| Input | What to record and why it matters |
|---|---|
| Run length along the wall | Usable length between obstructions — corner, partition, mirror cabinet, shower enclosure. Determines whether one continuous run works or the shelving has to be split into bays. |
| Projection (depth) from wall face | Clear distance the shelf may occupy. Check it against the basin tap spout, shower head, door handle and any recessed niche so nothing fouls when in use. |
| Vertical positions of each tier | Height of every shelf above finished floor level, plus the clear gap between tiers once bottles, jars and linen are standing upright. Reach height for children, seated users and hotel guests all differ. |
| Setback from wet zones | Distance from shower enclosure, bath rim or basin splash area. This drives the bracket and rail finish choice rather than the glass itself. |
| Obstructions and outlets | Positions of towel rails, grab bars, soap holders, sockets, isolated switches and any concealed pipework or cistern frame. Fixings must avoid services. |
| Wall build-up and substrate | Tile over plasterboard, solid masonry, timber stud, or a framed partition with a cavity. State board thickness and whether noggins or reinforcement are present at the fixing line. |
| Quantity per room and per floor | Count by room type — guest bathroom, main ensuite, pool bath — so identical configurations can be repeated consistently across a villa or hotel block. |
Every row above should be filled in for the room being quoted; where a value is still subject to design development, say so on the drawing rather than leaving it blank, so we can quote a workable range instead of holding production.
Project Inputs That Shape the Configuration
Intended use and loading
Tell us what will actually stand on the shelf. A tier holding folded towels and a few bottles is a different case from one carrying full-size amenity jars, decanters or dense ceramic accessories. declare the intended loading for each tier rather than giving one blanket answer; we then set the span, support spacing and glass specification to suit that use. Load limits and glass specification are confirmed per configuration — they are not fixed values carried across every project.
Glass type, thickness and edge detail
State whether you want clear, low-iron, tinted, frosted or patterned glass, and how the edges should read: polished square arris, bevelled, or a rounded profile for bathrooms used by children. Edge detail is a visible design decision and also affects how the shelf meets the wall bracket, so it is best fixed at the same time as the size.
Finish of brackets, rails and fittings
Brackets, support rails and any adjoining shelving accessories should match the other ironmongery in the room. Send the tapware and hardware schedule — including the finish name or sample reference — so shelf fittings are ordered to match rather than approximated later. In bathrooms close to the shower or an outdoor-adjacent window, the finish choice also carries the wear expectation.
Layout context with the rest of the bathroom
Shelving rarely stands alone. If the shelves sit beside a floating vanity, over a mirror cabinet, or in a corner where corner open shelving works better than a straight run, send that context with the dimensions. Corner positions and returns need their own measurements — an angle dimension and the two leg lengths — not a single wall length.
Installation responsibility and access
Confirm who is installing: your bathroom contractor, our installation support, or a local fitter you appoint. Fixing method follows the substrate, so if reinforcement has not yet been built into a stud wall, tell us while the wall is still open. Also mention site access — floor level, lift availability and delivery window — which matters on apartments and multi-storey villas.
How to Send the Information
A room elevation drawing or a marked-up photograph is worth more than a list of numbers. On it, mark the shelf positions, projection, tier heights and every obstruction. Add the room name, the floor and the unit or room number from your schedule so configurations can be tracked across a project. For repeat room types, one approved configuration with a quantity is enough; for bespoke bathrooms, send each set separately.
If you are consolidating shelving with other bathroom items — vanities, mirror cabinets, basins, shower systems, lighting and cabinetry — send them as one package. Grouping the sanitaryware and joinery in a single enquiry lets us align finishes and dimensions across items that meet each other on site, instead of coordinating separate orders after the fact.
Common Gaps That Delay Production
- Dimensions taken before tiling. Tile thickness changes every projection and height. State the finish build-up if the wall is not yet complete.
- No substrate information. Without knowing whether the wall is masonry, plasterboard or framed partition, we cannot confirm a fixing method.
- Loading left unspecified. "Bathroom shelf" covers everything from a single toothbrush to a full amenity range. Give the intended contents per tier.
- Finish described in words only. "Chrome look" or "matte black" is not an order. Send the hardware schedule reference or a sample.
- Obstructions omitted. Grab bars, sockets and concealed cistern frames are the most frequent causes of on-site rework.
- One size assumed across all rooms. Guest and main bathrooms rarely share identical geometry; confirm each configuration against its own room.
Questions We Are Often Asked
Can existing shelves be replaced to the same size?
Yes. Send the exact length, depth and thickness of the shelf being replaced, a photograph of the support arrangement, and the wall condition behind it. Replacement units are made to the measured existing dimensions once we confirm the fixing detail.
Do you supply corner and niche shelving as well as straight runs?
Corner positions are handled through our Open Shelving configurations, with matching finishes. For recessed niches and integrated storage features, we coordinate the shelving with the surrounding panel and joinery work so reveals line up.
When is the right point in a project to lock in shelving?
Before wall finishes are fixed. That way reinforcement and blocking for fixings can be built into partitions, and shelf heights can still be adjusted against tapware and mirror positions. Late enquiries are workable but often restrict the fixing options available.
Can shelving finishes match other bathroom ironmongery?
Yes — send the hardware schedule and we specify brackets, rails and accessories to the same finish. Where a project groups sanitaryware, vanities and accessories together, matching is handled at order stage rather than left to site.
Next Step
Send us your room elevation, the measurements listed above, the intended loading per tier, and your hardware finish reference. We will confirm the glass specification, support arrangement and fixing method for that configuration before production begins, and can supply matching freestanding open shelves and corner units where the layout calls for them. As a China-based manufacturer of furniture and building materials working on villa, hospitality and residential projects, SANTERSON coordinates shelving alongside vanities, sanitaryware, lighting and cabinetry so that one package arrives with consistent dimensions and finishes.
Send your measurements and we will confirm the configuration
Share room dimensions, substrate details, loading requirements and finish references for your project. Our team reviews each configuration before production. Contact PHILLIP by phone or WhatsApp on +86-13928214007, or email santerson@qq.com.
Explore the full range at Santerson Glass Shelves, and review our Turnkey Interior Project Solutions for coordinated villa, hotel and office fit-out supply.