A wardrobe package is one of the longest-lead items in a residential or hospitality fit-out, and it is also one of the easiest places for a project to go over budget. If you are sourcing Oak Solid Wood Wardrobes for villas, serviced apartments or hotel guest rooms, the supplier question is rarely whether they can make one unit — it is whether they can make every unit to your dimensions, in one finish family, and land them on site without a snag list. Here is what to verify before you place the order.

1. Confirm the supplier builds to your dimensions, not to a catalogue size

Solid wood wardrobes fail on site in two ways: they do not fit the reveal, or the doors foul the skirting and architraves because nobody reconciled the joinery drawing with the flooring and wall build-up. A supplier who works from fixed module sizes will quote quickly and then ask for site corrections later.

Ask specifically whether sizing is made-to-measure per opening, whether the internal layout (hanging rails, drawers, shelving, shoe and linen compartments) is drawn for each room type, and who signs off the dimensional drawing. Our Classic Paneled Solid Wood Wardrobes and the wider solid wood range are specified per project: dimensions, layout and finish are confirmed with the buyer before production starts.

2. Ask what is actually solid, and where engineered board is used

Solid wood on a quotation can mean solid timber frames with engineered panels, solid fronts on a veneer carcass, or a full solid-wood construction. None of these is automatically wrong — but the difference drives cost, movement in humid climates and how the unit behaves around built-in lighting.

A serious supplier will state it plainly. Request:

  • a written breakdown of door, carcass, back panel and shelf construction;
  • the species and cut (quarter-sawn versus flat-sawn oak changes the grain pattern you will see across a run of bedrooms);
  • the finish system and how many coats, plus which samples were approved;
  • how the same finish is repeated on Walnut Solid Wood Wardrobes, veneer or lacquer units in the same dwelling, so the joinery reads as one family.

3. Check they can coordinate the wardrobe with the rest of the fit-out

Wardrobes rarely sit alone. They meet engineered oak flooring, wall panelling, internal doors, vanities and kitchen cabinetry. When those come from different factories, colour and edge detailing drift, and the buyer spends the last weeks of the job chasing samples that match.

This is where a one-stop furniture and building materials supplier earns its fee. At SANTERSON we produce built-in furniture alongside interior fixtures, doors, flooring, wall and ceiling panels and sanitary ware, so the wardrobe carcass, the European oak engineered flooring it sits on and the door beside it can be specified against one set of approved finishes. For guest-room packages we also coordinate vanities, mirror cabinets and lighting from the same programme.

4. Test their custom and OEM capability before you need it

Every project has at least one non-standard requirement: a corner unit that returns around a column, an arched top to match an existing opening, integrated lighting with a transformer pocket, or your own brand on the label for a developer's repeat programme. Ask what prototyping they offer, whether 3D models and physical samples are produced before mass production, and what minimum order quantities apply per finish.

Our Custom & OEM Service covers bespoke design and prototyping, material and texture selection across wood, metals, engineered stone and laminates, plus branding such as engraving and packaging.

5. Understand the logistics of a heavy, oversized consignment

Wardrobes are dense, awkward and expensive to replace. Before ordering, confirm how units are packed and protected, whether they ship flat-packed or assembled, which Incoterms apply, who handles customs documentation, and how the delivery is tracked to site.

SANTERSON arranges freight by sea, air and rail with customs paperwork, container loading planning and door-to-door delivery. Transit time, duties and delivery scope are confirmed per project rather than quoted as a blanket promise.

6. Get the installation and after-sales terms in writing

Ask who installs, whether an installer or supervisor travels to site or works remotely with your contractor, how snags are recorded at handover, and what happens when a door is damaged after the builders have been through. A supplier confident in their product will define inspection, warranty scope and spare-part supply instead of leaving it vague.

Our installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage and spare parts. Warranty terms and response arrangements are agreed per project.

Pre-order checklist for the buyer

  • Dimensional drawings signed off against the finished floor level and wall build-up.
  • Written construction spec: species, cut, panel make-up, finish system and approved samples.
  • Internal layout confirmed per room type, with hardware brand and opening clearances.
  • Finish schedule matched to cabinetry, doors, flooring and panelling on the same project.
  • Packing method, container plan, Incoterms and customs documents agreed in writing.
  • Snag process, warranty scope and spare-part route defined before production starts.

Product dimensions, finishes and technical specifications are confirmed with the buyer for each project before manufacture. Please request current specifications rather than relying on published figures.

Send us the room set, drawings and finish direction and we will quote the wardrobe package as part of the wider fit-out — production, logistics and installation under one programme. Contact PHILLIP on WhatsApp +86-13928214007, email santerson@qq.com, or use the contact page.