A high gloss wood effect kitchen can look identical in two quotations and still cost very different amounts, because the number hides decisions nobody wrote down. When we receive an enquiry for high gloss wood effect cabinets, the fastest projects are the ones where the buyer sends the same information a fabricator needs to cut panels. This article lists what to prepare before you ask for a price, so the figure you receive is one you can actually compare with other offers.

1. The space: drawings, not room names

Send a measured layout rather than "a 12 m² kitchen". For an accurate quotation we need the wall lengths and heights, the position of doors and windows, the floor level, and where services run — water inlets and waste, gas, extractor ducting, power outlets and switches. Note ceiling height at both ends, because most rooms are not perfectly level, and a made-to-measure run has to absorb that difference. If you have architectural drawings or a cabinet layout from a designer, attach them; if you do not, a sketch with dimensions marked on every wall is enough to start.

Tell us the appliance schedule as well. Oven, hob, dishwasher, fridge and wine cooler positions decide tall housing widths, ventilation gaps and drawer stacks, and an appliance added after production starts means rebuilt carcasses.

2. The finish: what "wood effect" has to specify

"High gloss wood effect" covers several different door constructions, and each behaves differently under a lacquer or laminate surface. When you request a quote, state:

  • The species or grain pattern you want — oak, walnut, teak-look, or a neutral grain — and whether the grain should run vertically or horizontally on each door.
  • Whether the surface is a real wood veneer with gloss treatment or a printed decorative finish. Our high gloss wood veneer cabinets and our printed high gloss doors are made to the same drawing but priced and maintained differently.
  • The sheen you expect. "High gloss" on a sample and "high gloss" on a delivered door can be noticeably different, so ask for a finished sample board of the actual door, not a colour swatch card.
  • Edge treatment. Gloss doors with matched edge banding look continuous from every angle; unmatched edges are cheaper and visible at close range.

If your project mixes finishes — gloss doors on the island, matte or handleless fronts elsewhere — list each group separately. Our handleless high gloss cabinets and handleless minimalist kitchen cabinets are quoted as their own line items, because the profile and opening mechanism differ from a handled door.

3. Layout and interior specification

Give the run type — straight, L-shaped, U-shaped or with an island — and say which units are base, wall and tall. Interior fittings change the price more than most buyers expect, so specify what goes inside: drawer stacks instead of doors, pull-out corners, lazy susans, pantry shelving, appliance towers, integrated bins, cutlery organisation, and lighting inside glass-fronted units. For cabinet hardware we supply hinges, drawer slide rails, support legs and connecting brackets, and we list them on the quotation so you can see what is included rather than assumed.

State your preference for soft-close fittings and for handleless or handled doors. On a high gloss surface this matters twice over: fingerprints and knocks are more visible on gloss, and hardware quality determines how long a heavy door stays aligned.

4. Quantities, project type and standards

Say whether the order is one villa kitchen or a repeated apartment type, and give the unit count per type. Repeating layouts drive tooling and batch decisions, so a developer with 40 identical kitchens and a homeowner with one bespoke run receive different prices for the same finish. For hospitality and multifamily work, send the room-by-room schedule and any brand standard drawings you are working to.

If your market has documentation requirements — fire classification for a commercial fit-out, an emissions grade for board material, or a specification sheet for consultant approval — say so in the enquiry. We will confirm on the quotation which materials meet those requirements and provide the relevant documents, rather than leaving them to be discovered after order.

5. Delivery, access and installation

The last part of a complete enquiry is logistics information: destination port or site address, whether delivery is door-to-door or to a port, the container or shipment plan you are working with, and site access details such as lift size, stair width or crane needs for an upper-floor apartment. Built-in cabinetry also belongs in a wider fit-out package, so if your project also needs wardrobes, vanities, doors, wall panelling or custom built-in kitchen cabinets for other units, mention it — one coordinated production and shipment is easier to schedule than four separate orders.

Tell us who installs. If our team handles installation and after-sales support, we need the site programme; if a local contractor installs, we need to know their fixing method and the tolerances they expect, so panels arrive ready for their system.

A short enquiry checklist

  • Measured drawings with ceiling heights, window and door positions, service locations
  • Appliance schedule with models and dimensions
  • Door construction, grain direction, sheen expectation and edge treatment
  • Interior fittings and hardware list, soft-close preference
  • Quantities per unit type and project type (residential, villa, hospitality)
  • Documentation or classification requirements for your market
  • Destination, delivery terms, site access and installation responsibility

Send those seven items and a fabricator can return an itemised quotation with a clear bill of materials, rather than a single number you cannot compare. If you are specifying high gloss wood effect cabinets for a coming project, our team can review your drawings and confirm finish, layout and configuration options before production starts.

SANTERSON — furniture and building materials manufacturer, custom and OEM cabinetry for villa, hospitality and apartment projects. Contact: https://www.santerson.com/contact/