A swim spa on a villa or resort project is never priced as one line item. The shell, the water systems, the power supply, the base that carries a full load and the freight that gets it to site all sit in different trades and different budget columns. This guide uses our Outdoor Swim Spa WS-PC07A-T as the worked example, because it is a wider configuration in our swimming pool range and its catalogue specification exposes most of the cost drivers that appear when a spa is combined with other outdoor products on the same order.

The figures below are transcribed from the product page. They are starting points for your bill of quantities, not a quotation: availability and compatibility of options vary by model, and included equipment plus electrical requirements must be confirmed for the configuration you select before anything is committed to a project budget.

Start From the Catalogue Specification, Not a Rounded Assumption

The fastest way to get a swim spa line wrong is to carry a number over from a similar-looking model. The PC07 family shares a shell length but differs in width, jet count and installed power, and each of those changes both the purchase price and the site work around it. Here is the specification as listed for the WS-PC07A-T:

Specification itemAs listed on the product page
ModelWS-PC07A-T
Catalogue dimensions7000 × 3000 × 1470 mm
Control system1 set
Swim training system1 set
Water pump1 pc
Filter pump1 pc
Jet total56 pcs
LED lights4
Total power11.55 kW
Features shownWater jets, LED lighting, Ozone, Swim training system

Two of those lines do most of the budgeting work. Total power sets what your electrical contractor has to deliver and what the client will run every time the spa is in use. Catalogue dimensions set the footprint, the access route to that footprint and the load the supporting structure has to carry. Read them as interfaces rather than as product trivia.

Budget Line 1: The Spa Unit and Its Configuration

The base unit covers the shell, cabinet, control system, pumps, jets, lighting and the swim training system listed above. Options are where a quoted price usually moves, and our catalogue lists these as configurable accessories for this range: control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps.

For budgeting, split those options into three groups so nothing gets missed:

  • Operating equipment — heat pump and insulation package. On a spa of this volume these determine whether the client can hold water temperature through a cool season at a running cost they will accept. Specify them at tender stage, not as a late variation.
  • Water treatment — the ozone system is already shown on this model; UV sterilization and sand filtration are additional. Decide what your maintenance regime assumes, because that choice changes both the equipment list and the service access you provide around the plant.
  • Use and access items — steps and any cover option carried in the wider range. Small individually, but they affect deck geometry and clearances, so they belong in the drawing set rather than in a purchase order note.
Ask for the equipment schedule of your exact configuration in writing before you price the electrical and civil packages. "Included as standard" is not consistent across models in this range, and an option that is standard on one variant may be an add-on on another.

Budget Line 2: Power Supply and Protection

The listed total power for the WS-PC07A-T is 11.55 kW. Treat that figure as the equipment load, and then let your electrical engineer size the circuit, protective device, cable route and any dedicated distribution board from it. In a multi-product project this is where duplicated cost appears: if the spa, an outdoor kitchen, poolside seating lighting and garden circuits are each designed by different parties, you may end up paying twice for distribution that could have been one board.

Three practical checks before the electrical package is tendered:

  • Confirm the supply arrangement your site can actually provide, and confirm it against the configuration you selected — a heat pump changes the picture materially.
  • Keep isolation and maintenance access to the plant clear of fixed joinery and decking.
  • Agree who supplies the final connection and any local compliance sign-off, in writing, before order.

Budget Line 3: Base, Access and Installation Route

A filled spa is a heavy point load. At 7000 × 3000 mm with a listed height of 1470 mm, the slab, pad or deck support under it must be engineered for the full wet load — not for the dry weight quoted on a data sheet. On upper terraces and podium decks this is often the line that needs structural input earliest, because it can drive beam positions for the whole outdoor level.

The second civil cost people forget is the delivery route. A 7 m module has to travel from the site entrance to its final position without a clash with structure, landscaping or an existing building line. Measure that route on the drawing and on site, and record it before you commit to a position. Revising a deck to let a spa through after installation is scheduled is expensive; checking it during design is not.

Budget Line 4: Freight, Packaging and Site Handover

For overseas projects the spa arrives as part of a consolidated shipment rather than on its own. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. What sits on your side of the budget is the import line: duties, Incoterms, insurance cover and final delivery scope need to be agreed case by case with your team before order.

For budgeting purposes, keep four separate costs visible: ocean or air freight to port, inland delivery to the exact position on site, offloading equipment (a crane or gantry for a module of this size), and storage if the spa cannot land on its final base when it arrives. Combining the spa with other products from the same order — outdoor furniture, pergolas, screens, pool and spa products — is where consolidated container loading pays for itself, provided everything reaches the same handover window.

Combining the Spa With Other Products Without Double Counting

The reason a swim spa belongs in a multi-product budget rather than a standalone one is that it shares infrastructure with everything around it. Where the same work appears twice, you pay twice.

  • Waterproofing and drainage — the spa's overflow, plant-room drainage and the surrounding deck fall are one design, not two.
  • Finishes — decking, cladding and paving that wrap the shell should be set out from the spa dimensions so cuts and trims are planned rather than discovered.
  • Outdoor living zone — seating, shade structures and lighting around the spa need clearances from access panels and steps. Coordinate them in one layout.
  • Power and control — one distribution board and one maintenance schedule for the outdoor wet zone is cheaper to build and easier to hand over than three.

Our one-stop solution covers design consultation and space planning, material selection and product specification, manufacturing and quality control, project management with site coordination, and final installation handover. In practice that means the spa, the joinery, the outdoor furniture and the finishes around it can be specified against one drawing set and shipped on one programme.

A Simple Cost Structure to Fill In

Use this as a checklist when you build the swim spa section of your project budget. Anything left blank is still an open risk, not a saving.

Cost groupWhat to confirm before ordering
Spa unit and optionsExact configuration; which of heat pump, UV sterilization, sand filtration, insulation and steps are included
ElectricalSupply arrangement for the selected configuration; circuit sizing from the listed equipment load; isolation and access
Civil and structuralEngineered base for full wet load at 7000 × 3000 mm footprint; drainage, overflow and waterproofing interface
Access and riggingMeasured delivery route; offloading equipment; position available on the arrival date
Freight and importConsolidated shipment plan; duties, Incoterms and insurance agreed in writing; handover window aligned with other products
Commissioning and aftercareSnag inspection at handover; spare parts and maintenance terms confirmed for the installed configuration

Frequently Asked Questions

Can I compare WS-PC07A-T with other models on price alone?

No. Compare the equipment schedule and installed power first. Within this range, jet counts and total power differ between variants of similar length, so two shells that look equivalent can carry very different electrical and running-cost implications.

Should the spa be ordered before the surrounding deck is designed?

Fix the configuration first, then design the deck around it. Deck geometry depends on access panels, steps, plant clearances and the exact shell dimensions, all of which are set by the configuration you select.

Is a heat pump optional or essential?

It depends on where the project is and how the client intends to use the spa through the cooler part of the year. It appears in the catalogue option list rather than in the listed specification for this model, so confirm its status for your configuration at specification stage — adding it after the setting is finished costs more than specifying it in the order.

Can the spa ship together with other products from the same project?

Yes. Consolidated packaging and container loading across furniture, outdoor products and building materials is part of how we handle project shipments, as long as the delivery dates align on your programme.

Scope It Once, Not Twice

Send us the spa position, your supply arrangement and the option list you want priced, and we will confirm the equipment schedule for the WS-PC07A-T configuration together with a consolidated shipment plan for the rest of the outdoor package.

Contact: PHILLIP · Phone / WhatsApp: +86-13928214007 · Email: santerson@qq.com · Enquiry form: santerson.com/contact