An undermount basin looks simple on a rendering and complicated on site. The bowl sits below the counter, so almost every visible detail depends on something else: the cut-out in the stone, the sealant joint, the tap deck, the waste body under the deck and the cabinet frame that has to carry all of it. That is why the finish conversation should happen while the order is being placed, not in the week the countertop is templated.
The Santerson Undermount Basin is listed in our Countertops & Basins collection as a configurable product for residential bathroom projects, with finish, layout and dimensions specified per project. Because so much is set per order, the questions below are the ones we ask buyers, contractors and designers before production starts.
1. The bowl shape and how deep it sits
Undermount bowls differ in plan shape, internal depth and where the overflow sits. A shallow, wide bowl suits a powder room where the counter is narrow; a deeper bowl suits a family bathroom where splashing matters more than deck space. The bowl also sets how much clearance you need inside the vanity, which affects drawer layout and whether the front panel can be flush.
Send us the plan shape you want and the finished counter depth, and we will confirm the bowl position against the waste outlet before anything is cut.
2. Countertop material and edge profile
The joint between bowl rim and counter is only as good as the deck it sits on. Stone and engineered surfaces behave differently under a cut-out, and an eased, bullnose or mitred edge changes both the look of that joint and how much support the rim receives. Our Santerson Stone & Marble Surfaces are supplied made to measure with material and finish options, so the surface and the basin should be specified as one set rather than ordered from two places on different schedules.
Confirm three things together: the surface material, the edge profile at the cut-out, and the thickness of the deck. A 20 mm deck and a thicker mitred edge need different fixing details.
3. Cut-out dimensions and who templates them
This is the single most common source of rework. Cut-out length, width, corner radii and the position of the cut-out from the back and front edges all have to match the bowl you ordered. If the countertop is templated on site, the bowl should be on site at the same time as the templating team; if it is drawn from a shop drawing, that drawing needs the bowl template dimensions, not an approximation.
- Ask for the cut-out template for the exact bowl selected, including corner radii.
- Confirm the set-back from the back wall, because taps and the rear rim share that space.
- Agree in writing who templates, who cuts and who fixes — us, the stone supplier or your fitter.
4. Tapware reach, spout height and the deck hole pattern
A tall vessel tap over a shallow undermount bowl splashes; a short spout over a deep bowl crowds the rim. Deck-mounted taps also need holes in the counter, which means the hole pattern has to be resolved before cutting, while wall-mounted taps push the whole decision upstream to the pipers and the tiled recess.
Decide the tap first, then set the spout reach against the bowl centreline and the number of deck holes. If you want concealed mixers, tell us at the drawing stage so the basin position and the wall setting-out line up.
5. Waste, trap and what sits below the deck
Pop-up or click wastes need a stem that clears the drawer runners; traps can be offset to win cabinet space in a shallow vanity. In a double vanity, two waste runs sharing one fall need planning early, because the trap positions sit inside the carcass you are also designing.
Our Santerson Double Basin Countertop is configured per project for basin spacing and countertop material, so when two undermount bowls are involved we recommend confirming the waste layout with the same drawing that fixes basin spacing.
6. Sealant colour and how the joint should read
The perimeter joint is visible every day. Specify the sealant colour against both the bowl and the surface — a clear silicone on a honed pale stone looks different from a colour-matched one, and a dark surface with a bright joint draws the eye to the seam. Also agree which side of the joint gets the tooling bead, so the fitter and the finisher are not guessing.
7. Cabinet support and fixing method
An undermount bowl hangs from the deck, and the deck rests on the carcass. A floating or wall-mounted vanity transfers that load differently from a floor-standing one, so bracket positions, noggins and the timber or metal framing under the cut-out belong in the shop drawing. If you are ordering the joinery with the basin — as with our Santerson Integrated Countertop Vanity — this is one line item instead of a coordination meeting between two suppliers.
8. Finish samples and the sign-off sheet
For multi-unit work, order a sample of the bowl finish and the surface before the full run. Glaze tone, surface sheen and edge colour photograph well individually and read differently side by side under bathroom lighting. A short sign-off sheet listing bowl code, cut-out dimensions, deck material and thickness, edge profile, tap hole pattern, waste type and sealant colour prevents most of the arguments later.
Before you place the order
- Bowl shape, depth and overflow position confirmed against your counter depth
- Cut-out template with corner radii, plus set-back from back and front edges
- Deck material, thickness and edge profile agreed as one specification
- Tap type, spout reach and hole pattern fixed before cutting
- Waste and trap type checked against drawer and carcass layout
- Sealant colour and joint detail written down
- Support framing shown on the shop drawing for the vanity
- Samples signed off, especially on multi-unit projects
SANTERSON has manufactured furniture and building materials since 2008 and supplies custom and OEM products for villa, hospitality and office projects, with logistics, installation and after-sales support alongside production. If you are specifying bathrooms across several units, send us the drawings and we will return a configuration sheet covering the basin, countertop and vanity as one package — see our Bathroom Sanitary Fixtures range to start.
Working from shop drawings? Send the vanity elevation, the counter depth and your preferred tapware, and we will confirm which undermount configuration fits before the stone is cut.