A full-height storage wall looks simple on a rendering: one clean surface from floor to ceiling, a few open niches, everything else hidden. On site it is one of the least forgiving items in a joinery package, because every millimetre of out-of-square wall, every skirting board and every service run shows up in the finished elevation. If you are comparing quotations for Santerson Full Height Storage Walls, the useful comparison is not the price per linear metre — it is what each supplier has actually been asked to solve.

1. Start from the wall, not the catalogue image

Storage walls in this range are made-to-measure listings: the published product page states that dimensions, layout and finish options are specified per project rather than ordered off a fixed module. That is good news for fit, but it means two quotations carrying the same product name can describe very different scopes. Before you compare anything, ask each supplier to confirm three things in writing:

  • the exact wall run they priced, including overall width, height and depth at the shallowest point;
  • how the unit resolves the floor-to-ceiling junction — scribe to an uneven ceiling, a shadow gap, or a bulkhead built on site;
  • what is excluded: skirting removal and refit, cornices, architraves, existing power points, and any packing out of out-of-plumb walls.

On an apartment or villa refurbishment those exclusions are where the real cost appears. A quotation that assumes a perfectly square void on a site with a few millimetres of floor-to-ceiling variation is not cheaper — it is just unbilled.

2. Compare the internal layout, because that is what you live with

The same wall can be specified for different jobs across the Integrated Storage Walls family: Santerson Mixed Open & Closed Storage when you want display shelving balanced against closed cupboards, Santerson Integrated Media Storage when the wall also carries the television and its devices, and Santerson Open Display Niches where the display element is the point. Hidden cabinets sit behind flush fronts when a corridor or living wall has to read as plain panelling.

Ask for the internal elevation, not just the front elevation. A comparison sheet should show hanging rail heights, drawer stack positions, adjustable versus fixed shelf centres, and where tall items such as vacuum cleaners, ironing boards or luggage actually go. Two walls at the same price per metre differ enormously once you count usable cubic volume against the household or guest-store inventory you need to place.

3. Materials, finishes and hardware: pin down what is being quoted

Product pages in this collection list material and finish options without fixing a single specification, so the same model name can arrive with different substrates and surfaces. For each quotation, record the board type and thickness for carcases and doors, the surface system (melamine, lacquer, acrylic, veneer or a textured panel), the edge treatment on visible edges, and the make and closing mechanism of hinges, slides and lift systems. Handleless fronts in particular need their opening method stated — routed pull, profile handle or touch-to-open — because that changes both cost and how the front behaves after years of use.

Finish continuity is worth a line item of its own. If the storage wall has to match kitchen cabinetry, wardrobes or wall panelling elsewhere in the project, request physical samples from the same production batch rather than accepting a colour name on a drawing. Veneer grain direction and sheen level are the two details most often discovered too late.

4. Lighting, ventilation and services

Integrated niche and shelf lighting is specified alongside these walls through Santerson Integrated Cabinet Lighting. Where lighting is in scope, the comparison should cover driver location and access, cable routing, switching or dimming control, and who supplies the electrical first fix versus who terminates it. Closed compartments that house media devices also need a heat and cable plan: device positions, ventilation paths at the back of the bay, and how remote signals or a glass-fronted section are handled.

The product listing itself asks buyers to confirm electrical specifications and compatibility for each cabinet design, so treat lighting as a specification item on the drawing rather than an accessory added at the end.

5. Procurement route: one supplier or several trades

Storage walls rarely arrive alone. On villa and hospitality jobs they are ordered next to kitchen cabinetry, wardrobes, doors and panelling, and the finish and level coordination between those items decides whether the interior looks resolved. Working through a single one-stop furniture and building materials supplier means one set of drawings, one production schedule and one delivery window — which matters most on Australian projects where you are coordinating from another time zone and cannot walk the site daily.

SANTERSON describes its workflow as design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover, with freight and door-to-door delivery arranged by sea, air or rail. Confirm the specific scope for your job — Incoterms, packaging, container loading, who receives the goods on site, what installation support is included, and the warranty terms that apply in writing — rather than assuming a service level from marketing copy.

6. What a fair comparison sheet looks like

Put every quotation into one table with these rows: measured dimensions and how site variation is handled; internal layout drawing revision number; board and finish specification with sample reference; hardware schedule; lighting and electrical split of responsibility; drawings approved before production; packing list and container plan; delivery terms and named destination; installation method and who performs it; snag and spare-parts process. A supplier comfortable filling all of those rows is normally the safer buy even at a higher headline number.

Before you place the order

Send the same measured drawing to every bidder, insist on an internal elevation and a hardware schedule, and hold the finish samples in your hand under the room's own lighting. If you want a made-to-measure proposal for a specific wall run, contact SANTERSON with the floor plan, ceiling heights and a list of what the wall must store, and compare the answers line by line.