A swim spa quotation is easy to compare on price and hard to compare on scope. Before you approve the cost of an Outdoor Swim Spa WS-PC05CH for a hotel, resort, villa development or clubhouse, use this checklist to check that the proposal actually describes the same asset your site team will have to install, operate and maintain.

Start with what the catalogue sheet really says

The WS-PC05CH sits in a configurable outdoor swim and hydrotherapy range. The published catalogue entry lists a shell of 5000 × 3000 × 900 mm, one control system, one water pump, one filter pump, 30 jets in total, one LED light and a total power figure of 2.45 kW, with water jets, LED lighting and ozone shown as the featured items.

Read those lines as a starting point rather than a purchase order. The same family carries different depths, jet counts and pump quantities from model to model, and the equipment list follows the configuration you select. A proposal that only names the model code tells you nothing about what has been added or removed since the catalogue was written.

Check the six line items that change project cost most

  • Shell size versus installed opening. Confirm the internal dimensions, the water depth and the access route to the pour. A 5000 × 3000 footprint still needs a crane path or an assembled-on-site solution, and the proposal should state which applies to your site.
  • Pumps and jet layout. Ask for pump quantity and duty separately from the jet count. Thirty jets sound generous until you know how many are seat-directed, how many are panel-mounted and what flow each one actually delivers.
  • Total power versus connected load. The catalogue figure covers the standard configuration. Add a heat pump, UV sterilisation or sand filtration and the electrical design changes. Request the as-specified connected load so your engineer can size the supply before the slab is poured.
  • Filtration and water treatment. Ozone appears on the standard feature list; UV sterilisation and sand filtration are catalogued options. Confirm which is included, who supplies it and what the routine consumables are.
  • Insulation, steps and controls. These items are easy to leave out of a quotation and expensive to add after the fact. For an outdoor unit running year-round, insulation and access should be priced in the first round, not negotiated in variations.
  • Swim training system. Not every model in this range carries one. If your brief promises lap swimming to residents or guests, make sure the specified configuration includes the swim system rather than hydrotherapy jets alone.
Compare proposals on the as-specified bill of materials, not on the model code. Two quotations for a "5 m × 3 m spa" can differ by an entire pump set, an insulation package and a treatment system — and both can be correct against the same catalogue page.

Read the electrical and civil scope as one drawing

The most common gap in a commercial swim spa package is the boundary between supplier scope and contractor scope. Before signing, ask for written confirmation of four items: who runs the dedicated supply and protection, who provides the structural support and drainage below the unit, who carries out the final connection and commissioning, and who hands over the operating instructions to your maintenance team.

Get these answers in writing during the quotation stage. Once the concrete is poured, an unpriced electrical upgrade or a missing access hatch turns into a variation with a schedule attached to it.

Judge the supplier on delivery and after-handover support

A swim spa rarely arrives alone. In most hospitality and villa packages it travels with outdoor lounge and seating furniture, poolside fixtures and interior fit-out items, all of which need to land in the right sequence. A supplier that consolidates these categories under one project team reduces the number of interfaces your site manager has to police — see how a turnkey project package is assembled, from design consultation and material selection through production, logistics and installation.

Ask the same questions you would ask of any long-life asset: what happens when a jet seal or a control board needs replacing, how spare parts are shipped, and who supports commissioning on site. Where the quotation covers freight, customs paperwork and door-to-door delivery, check that the incoterm and the delivery point match your actual site address rather than a port.

Five questions to send back to the vendor

  • Send the as-specified equipment list for this configuration, including pumps, treatment options, insulation and steps.
  • State the connected load and supply requirements for that exact build, not the catalogue default.
  • Show the delivery route, packaging method and lifting plan for our site access conditions.
  • Define where supplier scope ends and local contractor scope begins for power, base works and commissioning.
  • Confirm spare-parts supply and after-handover support in writing, with the response route named.

A proposal that answers all five is usually worth more than a cheaper one that answers none. The specification detail you collect now is what protects the operational budget for the rest of the asset's life.

SANTERSON supplies outdoor swim spas and hydrotherapy pools alongside furniture, interior fixtures and building materials for hospitality, villa and commercial projects, with custom/OEM production and door-to-door delivery. Contact our project team to review your swim spa specification against your site conditions.