A quotation for Wood Veneer European Cabinets only becomes comparable once every supplier is pricing the same room. Dimensioned drawings, a written appliance list and one signed finish sample do more to protect a budget than any amount of style discussion. Here is the information we ask owners, contractors and designers to send before we draw shop drawings for a veneer kitchen.

Start With Three Drawings Before Any Cabinet Talk

  • Shell plan — overall room dimensions, wall lengths, and the position of every door opening, window, riser, socket and drain or vent.
  • Setting-out plan — where the run starts, how tall the tall units should read against the ceiling, and which corners are working corners.
  • Services drawing — plumbing offsets, electrical points, the extraction route for the hob, and any ducting that has to be boxed in.

No drawings yet? Photograph each wall and add a dimensioned sketch. Our design team can turn that into space planning and 3D rendering, marking the questions that need an answer on site before production.

Measurements We Need, Wall By Wall

Take every measurement in one unit — millimetres suit cabinetry best. For each wall we want the length, the height from finished floor to underside of ceiling, and the depth available once skirting, dado or insulation is accounted for.

  • Floor to ceiling at three points on every run. Floors and ceilings are rarely square, and a small difference across a tall unit changes scribe widths and door alignment.
  • Window sill height and reveal depth, plus which way the casement opens. Base units under a window lose usable depth to the frame.
  • Door openings with the swing arc marked, so drawer banks and appliance doors do not clash in daily use.
  • Obstruction depths — radiators, gas meters, beams, bulkheads. Give the projection from the finished wall face, not the structural wall.
  • Aisle width between opposing runs. This decides whether a handleless front profile or a recessed pull is more practical to live with.

Appliance Schedule And Worktop Inputs

List every appliance you intend to integrate, with the model reference and the manufacturer's cut-out drawing. "Oven" is not a specification: an integrated oven needs its ventilation gap, hinge side and door overlay stated.

  • Fridge/freezer, oven, hob, extraction (ducted or recirculating), dishwasher, microwave, wine cabinet — each with dimensions and required clearances.
  • Tap position, bowl size and waste route, plus whether a water filter or softener has a home in the base unit.
  • Worktop material and thickness, so we can allow for it at the upstand and the cut-outs. If we supply the surface, tell us the slab or sheet size available so joints are planned rather than accepted on site.

Appliance cavities sit inside integrated appliance tall cabinets, so the schedule must be final before those carcasses reach production.

Layout Inputs That Decide The Interior

Tell us how the kitchen is used, not only how it should look. A guesthouse breakfast service and a family villa kitchen need different interiors in an identical room.

  • Layout type — single wall, L shaped corner cabinets, U shape, galley, or open plan with an island.
  • Corner handling — a carousel, a pull-out rack and plain shelving each need different clear opening widths and carcass sizes. Compare Lazy Susan corner cabinets with Pull Out Corner Cabinets.
  • Storage mix — drawer banks for pots, tray storage for baking sheets, and a fixed place for the small appliances you use daily versus those you want out of sight.
  • Sightlines from the living area, which matter most in open-plan villas and serviced apartments where the kitchen reads as furniture.

Veneer And Finish Details To Lock Down

Wood veneer is a natural material, so the specification has to say which part of the tree you are buying. Confirm each of these in writing:

  • Species and cut — oak, walnut or another species, and whether the leaf is crown cut, quarter cut or book matched. Grain width and figure change with all three.
  • Grade and colour range, agreed against a signed physical sample rather than a screen image. Photographs shift the tone; a sample board does not.
  • Grain direction on doors, drawer fronts and panels, including whether horizontal elements run with the grain across the whole elevation.
  • Sheen and surface, because gloss shows more figure and more fingerprints than an open-pore matte. Compare matte wood veneer cabinets with high gloss wood veneer cabinets before you decide.
  • Edge treatment, since the joint where the leaf wraps the edge reads clearly on a dark tone and almost not at all on a matte open-pore finish.
  • Companion finishes if the run mixes materials, for example two tone veneer cabinets paired with a painted or laminate door in the same elevation.

The custom built-in kitchen cabinets we supply for hotel and apartment work follow the same rule: one approved sample governs every door, and matching hinges, slide rails, support legs and brackets are itemised on the same sheet.

How We Turn Your Inputs Into Shop Drawings

Our cooperation steps are simple: project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up. When your drawings, appliance schedule and finish sample reach us we issue elevations showing every dimension, door swing and hardware item. You sign a drawing set, not a mood board.

The same job can cover the surrounding joinery — interior fixtures, wardrobes, doors and wall panelling — which keeps one supplier accountable for the package. Freight goes by sea, air or rail with door-to-door delivery, and installation and after-sales support are services we list; transit time, duties and warranty terms are confirmed project by project rather than assumed.

Send What You Already Have

Partial information is enough to begin. A plan, a photograph of each wall and an appliance list let us come back with the specific gaps — floor levels, ceiling levels, obstruction depths, appliance cut-outs and the one veneer direction you want sampled. From there a quotation becomes an apples-to-apples comparison instead of an estimate.