A black and light grey L-shaped kitchen with an LED-lit glass display cabinet looks simple on a rendering. It is one of the hardest kitchen scopes to price accurately, because the cost sits in things the picture does not show: how many tall cabinets are hiding ovens, which panels are flat and which are rebated, whether the glass display carries its own lighting circuit, and how the cabinetry lines up with worktops, splashbacks, tiling, electrical and plumbing on site. This guide breaks that scope down the way a manufacturer and one-stop furniture and building materials supplier would price it, using our Black & Light Grey L-Shaped Kitchen Cabinets as the worked example.

Why This Scope Is Harder To Budget Than It Looks

Two-tone flat panel cabinetry in black and light grey is unforgiving. A single dark slab door sets the tone for the whole run, so colour, sheen and grain direction have to be signed off against a physical sample under site lighting, not from a screen. The L layout itself drives cost more than the finish does: it creates one return corner, one or two tall cabinets, and usually a break in the run where an appliance column takes over.

On this design, three elements carry most of the budget risk:

  • The glass display cabinet with warm LED lighting. Glass panels, the frame that holds them, the light fitting, its transformer and its access point are all separate line items that a per-metre cabinetry rate will not capture.
  • Appliance integration. The central position is reserved for a built-in oven; the tall cabinet on the right can take stacked multi ovens. Each appliance niche needs the right carcass, ventilation and fixing detail, and the appliance itself may or may not be in your supply scope.
  • The splashback. The design is shown with a marble stone backsplash described as waterproof, oil-proof and easy to clean. Stone is measured, cut and installed by someone else on site unless you put it in the cabinetry package.

Budget these three separately first, then price the carcass run around them.

The Cost Drivers To Put In Writing Before You Request A Quotation

1. Layout and linear metres, stated twice

Give the supplier both numbers: total run length along each leg of the L, and the count of tall units. Two kitchens with the same linear metres can be priced far apart, because one has a single oven housing and the other has a full-height larder plus stacked ovens. The L layout is chosen here for a practical reason — it forms a working triangle between washing, preparing and cooking — so keep that triangle intact when someone tries to save money by shortening a leg.

2. Panel specification: flat, handleless or shaker

The example design uses contrasting black and light grey flat panels for a clean, minimalist effect. Decide early whether doors are flat slab, handleless with an integrated profile, or framed, because the door style changes the panel make-up, the hardware and the price band. If you want to compare the same layout in another door language, our Wood & Taupe Handleless Kitchen Cabinets show how a handleless detail reads against a warm neutral, and the Light & Dark Grey Modern Kitchen Cabinets use the same two-tone flat panel logic with light uppers and dark lowers.

3. Internal fit-out, not just doors

Cabinet dimensions, internal storage partitions, panel colour and surface finish are all customizable on this product, which is exactly why two quotations for the "same" kitchen can look incomparable. Specify what goes inside: drawer counts in the base units, the corner solution on the return, tall-unit racking, tray dividers, and whether any drawer carries a soft-close stay. Interior fit-out is where daily use is won or lost, and it is the first place a low quotation quietly cuts corners.

4. Lighting and electrics

The LED glass display needs a driver, a switch or sensor, and a route for cable that must be decided before the carcasses are fixed to the wall. Under-counter task lighting follows the same rule. Put the lighting specification — fitting type, colour temperature, control method — in the cabinetry enquiry so the supplier can pre-wire and pre-fit rather than leave your electrician guessing.

5. Worktops, splashbacks and the interfaces

Decide who supplies and who installs the worktop and the stone splashback, and record the interface details: cut-outs for sink and hob, the set-back of the splashback, the reveal at any appliance. These interfaces cause most kitchen site variations, and they cost far more when they are discovered late.

Practical rule: if a quotation lists only "supply and install kitchen cabinets, X linear metres", it is not comparable with another quotation. Ask for the same breakdown — carcasses, doors and fronts, worktops, splashback, appliance housings, lighting, hardware — so you can compare line by line.

Scope It As A Package, Not As Five Separate Trades

The reason this guide sits on a supplier site is that the kitchen rarely arrives alone. In villa and apartment work, cabinetry sits in the middle of a package that also includes wall panelling, doors, engineered timber flooring, bathroom ceramics and lighting. When those items come from different suppliers, you own the coordination: separate lead times for each trade, several sets of packaging notes, and an argument on site about who is responsible for the junction between the floor and the base units.

As a China-based furniture and building materials manufacturer operating since 2008, we supply cabinetry alongside those other elements, which means one specification sheet, one production queue and one consolidated shipment. The Custom Built-in Kitchen Cabinets line covers the interior-fixtures side of that package — layout, sizes, door styles, surface finishes and matching hardware such as hinges, drawer slide rails, support legs and connecting brackets — for hotel, apartment and residential renovation projects. For a kitchen in a fit-out that also needs wardrobes, media walls and doors in the same finish, see our Custom & OEM Service, which covers bespoke finishes, prototyping and flexible order quantities.

The practical benefit is not a lower unit price. It is fewer interfaces to police, and one party accountable for whether the black panel in the kitchen matches the black panel in the wardrobe.

A Line-Item Checklist For Your Quotation Request

Send this list with your drawings and you will get quotations you can compare honestly.

Line itemWhat to specify
CarcassesBoard make-up, carcass colour, thickness, and which units are visible when doors are open.
Doors and frontsPanel type (flat, handleless, framed), colour on both faces, sheen level, edge treatment, and sample approval before production.
Drawer boxes and hardwareHinge and slide brand or grade, soft-close where required, load rating, integrated handles or profile pulls.
Tall and appliance unitsExact appliance models or cut-out dimensions, ventilation route, stacked-oven housing detail, trim and filler widths.
Glass display cabinetGlass type and tint, frame finish, LED fitting, colour temperature, driver location, control method.
Worktop and splashbackMaterial, thickness, edge profile, cut-outs, joint details, who supplies and who installs.
Internal fit-outDrawer counts, corner access solution, tall-unit racking, trays, bins, dividers.
Packaging and freightPack list by room and unit number, container loading plan, Incoterms, freight mode (sea, air or rail), customs documents.
Site supportSetting-out drawings, fixing details, installation sequence, snag list at handover, spare parts for future maintenance.

Where The Contingency Should Sit

Hold contingency against the interfaces, not against the cabinets: appliance substitutions, changed worktop material, revised electrical positions and any change to the splashback after tiling has started. Cabinet and door prices are fixed once you sign off the sample; interface details keep moving until site works begin.

Common Budgeting Mistakes We See On Project Kitchens

  • Pricing the run by linear metre alone. A per-metre rate hides the glass display, its lighting and the tall appliance units, which are the expensive parts of this design.
  • Approving a colour from a screen. Black reads differently in matt and gloss and under warm versus cool light. Approve a physical panel against the actual wall and floor finishes.
  • Leaving appliance selection to site. The tall cabinet for stacked ovens has to be built around known dimensions, not adjusted with timber on the day.
  • Splitting cabinetry, stone and lighting across suppliers with no shared drawing set. The saving is small; the coordination cost is not.
  • No spare-parts plan. Kitchens get damaged during a project. Order the panel colour and hardware code with the original batch and keep matching spares on file for maintenance years later.

How A Turnkey Route Changes The Paperwork

If you would rather buy the kitchen as part of a wider fit-out, our Turnkey Solutions cover villa, hospitality and office projects through consultation, design and planning, production, logistics, installation and after-sales. On the supply side that means freight forwarding by sea, air or rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery — see Logistics & Door-to-Door Delivery. On the site side, Installation & After-sales Support covers on-site installation, inspection and snagging, spare parts and ongoing maintenance.

Import terms, duties, transit times, warranty scope and installer availability vary by project and destination, so we confirm those case by case rather than quoting a blanket service level. Send us the drawings and the appliance schedule, and you will get a quotation broken down line by line — the same structure as the checklist above.

Ready to price your L-shaped kitchen properly? Contact SANTERSON with your layout, appliance list and finish references, and we will return an itemised quotation for the cabinetry, glass display, lighting and matching interior fixtures.