A door schedule can be approved on paper long before anyone has held an actual leaf in their hands. For standard interior hinged doors, that gap between drawing and physical product is where most avoidable rework begins: a veneer that reads warmer under site lighting than on the sample board, an edge profile that does not line up with the architrave detail, a leaf that swings into a switch plate. Reviewing finish samples before production starts is the cheapest quality control step in a joinery package, and it works best when it is planned as a formal stage rather than left to chance.

Why the sample stage matters more for hinged doors than for most finishes

Hinged doors are seen and touched on every floor of a villa or apartment project, in every room type, from multiple angles and under several lighting conditions. Unlike a wall finish that covers one plane, a door combines a large flat face, narrow edges, a frame, ironmongery cut-outs and a reveal to the surrounding wall. Each of those junctions is a place where colour, grain direction and profile have to agree.

Our interior door range is made to measure for each project, with material and finish options specified per development rather than fixed to one catalogue standard. That flexibility is the reason a sample review is necessary: the same model can be built with different substrate, surface material and coating depending on what the design team selects, so approving the drawing alone does not lock down what arrives on site.

What to request before you approve anything

Ask for a sample pack that reflects how the door will actually be built, not just a finish swatch. For each door type on the schedule we would expect to supply:

  • A full-size or large-format panel sample in the selected surface material and finish, showing grain direction and any sheen.
  • An edge and stile cross-section so the leaf thickness, core build and edge treatment are visible.
  • The matching frame and architrave section, since these are produced separately from the leaf and often drift out of match.
  • Two or three coating variations in the same colour where the finish is a painted or lacquered one, so the team can choose sheen level rather than only hue.
  • The ironmongery cut-out detail at scale, with the selected hinges and lock body positions marked.

Request these as early as the design-development stage. Samples take time to produce and ship, and a late sample review pushes the whole door package into the critical path of the programme.

How to run the review on site conditions, not in a showroom

A sample that looks right under a factory lamp can behave differently once it is next to the actual wall finish and floor material. We suggest evaluating each approved candidate against the real environment:

  • View the sample in both daylight and the specified artificial lighting, at the times of day the room will actually be used.
  • Hold it against the approved wall paint or panel, the skirting and architrave, and the flooring to check undertones do not clash.
  • Check the finish from a distance of one metre and from ten centimetres; a texture that looks refined up close can read as busy across a corridor.
  • Confirm the visible edge and the face read as one consistent colour, because edges absorb coating differently.
  • Test how fingerprints, dust and cleaning show up on the selected sheen in high-traffic rooms such as utility areas and bathrooms.

Where a project uses more than one door style — for example flush leaves in the bedrooms and classic panel hinged doors in the principal rooms — review them side by side. Panelled doors catch light along their mouldings, so a finish that matches a flat leaf on a swatch can appear lighter once profiled.

Documenting the approval so production has one clear reference

Verbal sign-off is where colour disputes start. Keep the approved physical sample, tag it with the project name, door type and schedule line, and record a short written note of what was agreed. A practical record covers:

Item to recordWhy it prevents rework
Sample reference and physical retentionBecomes the comparison standard for every delivered leaf, including later replenishment orders.
Door type, size range and opening direction per schedule lineSizes and hand of swing are made to measure and cannot be corrected after manufacture.
Surface material, finish system and sheen levelProtects against substitutions that change appearance under site lighting.
Frame, architrave and reveal detailsFixes the junction with wall finishes before setting-out begins on site.
Ironmongery selection and cut-out positionsAvoids mismatch between pre-cut doors and the hardware actually purchased.
Named approver and dateKeeps decisions traceable when the design team changes mid-programme.

Once that record is closed, treat the sample as a controlled document. If a designer changes finish after approval, restart the review rather than accepting a verbal variation; the cost of a new sample is small next to re-manufacturing a floor's worth of doors.

Checking the first production leaves against the approved sample

Sample approval does not end the review — it sets the benchmark for the first delivery. On arrival, before installation begins, check a representative number of leaves from the batch:

  • Lay the approved sample against each face and edge under site lighting and note any deviation.
  • Confirm leaf thickness, size and cut-out positions against the schedule that was signed off.
  • Check grain direction and panel orientation are consistent across doors in the same corridor or suite.
  • Inspect surfaces for handling damage from packing and transit, and record it before fixing doors in place.

If a deviation appears, raise it while the batch is still unpacked and uninstalled. Doors that are already hung and finished become a snagging and redecoration problem rather than a supply one.

A note on scope: our door products are specified per project, with made-to-measure sizing and material and finish options. Dimensions and selected specifications should be confirmed for each order, and the sample pack we supply reflects the configuration chosen for that project rather than a single fixed specification.

Coordinating doors with the rest of the fit-out is easier when one supplier holds the joinery, panelling and ironmongery interfaces together. If you are assembling an interior door package for a villa or apartment project, send us the door schedule and finish intent and we can return a sample pack matched to the configuration you are considering — including flush hinged doors and wood veneer hinged doors where the design calls for them.