A kitchen cabinet quotation can drift in two directions. Send a manufacturer a vague brief and you get a price for something close to what you pictured — but not quite, and usually not until the drawings are done and the deposit is paid. Send an over-specified brief and you pay for details that never mattered. What follows is the working list worth sending when you brief a manufacturer about custom minimalist kitchen cabinets for a home renovation: the information that changes the price, the information that changes the build, and the information that only needs to be settled after the drawings come back.

Start with what the room already is

Before anything about doors or finishes, the manufacturer needs the shell. For a renovation this means a measured drawing of the kitchen as it stands today — not a rendering from a design package, and not a floor plan copied from the original building documents. Existing conditions are where renovations differ from new builds: services that cannot be moved, a flue in an inconvenient place, a window sill that sits lower than the worktop line, a floor that is not level.

What to send:

  • A dimensioned plan with overall lengths plus the position of every wall projection, column and recess.
  • Heights: finished floor to ceiling, floor to window sill, floor to the underside of any beam.
  • Positions of water inlet, waste, gas, the electrical consumer unit and existing socket outlets, measured from two walls each.
  • A short note on what you intend to move and what must stay where it is.
  • Photographs of the four walls, taken straight-on rather than at an angle.

If you are working from architectural drawings instead of a site survey, say so in the brief. A cabinet maker can design to a drawing, but they need to know whether the numbers describe the building as built or as drawn — that single sentence decides how much tolerance gets built into the carcasses.

The decisions that actually move the price

Once the room is fixed, a handful of choices do most of the cost work. Put them in the first brief and the first quotation will be close to the final one.

DecisionWhat to specifyWhy it matters at quotation stage
Door style and edgeFlat slab, single-panel shaker, or a routed profile; radius on the edgesMinimalist work is mostly about the flat panel and how its edge is finished. Profiled doors are priced differently from slabs.
Handle methodReveal groove, integrated lip pull, push-to-open, or a visible handleOur handleless minimalist kitchen cabinets are built around continuous surfaces and touch-to-open fronts, which changes both the panel specification and the fitting selection.
Cabinet constructionCarcass material, back panel thickness, whether wall units hang on a rail systemIt sets the load rating for tall and deep units, and it decides what the installer needs on site.
FittingsHinges and slides with or without soft-close; drawer boxes versus shelf interiors; internal fittings by zoneFittings are the line most often quietly downgraded between the first quote and the final one. Name them early.
Appliance listModel numbers, or at minimum the external dimensions of oven, hob, extractor, dishwasher, refrigerator and any wine cabinetTall housing and ventilation gaps are sized from the appliance, not the other way round.
Worktop and splashbackMaterial, thickness, whether the worktop wraps returns, and where the joints sitAffects door heights, the scribe detail at walls, and whether the worktop is supplied by the cabinet maker or a third party.
Finish systemMatte lacquer, acrylic, melamine, wood veneer; sheen level; colour referenceAlways name the standard you are matching to. Two suppliers reading "matte grey" will not send you the same panel.

Write the brief as three columns, not a paragraph

The most useful format we have seen on an enquiry separates the project into three buckets. It stops the specification from being either bloated or thin.

FixedOpen to your recommendationTo be confirmed after drawings
Room dimensions, appliance models, the handle method you want, the colour family, and any unit that must match existing joinery elsewhere in the houseCarcass construction, internal layout by zone, fitting brand, how the scribe and light-cove details are resolvedExact panel sizes, reveal widths, whether a tall unit is one piece or two, final delivery split across containers

This structure tells the manufacturer where they may use their own experience and where they may not. It also makes the comparison between two quotations meaningful: you are comparing the same fixed items rather than two different interpretations of a paragraph.

Specify the minimalist details by name

"Minimalist" describes an intent, not a specification. The look is produced by a small set of details that should be written out, because each one has a cost and a trade-off.

  • Door alignment. Inset, overlay or full-overlay, and the gap width between doors. State whether doors and drawer fronts are to be equal height across a run.
  • Handleless method. A routed reveal, a channel with a profile, or a magnetic push-to-open. Each has different clearance requirements at returns and at the ceiling.
  • Appliance treatment. Integrated panels behind appliance doors, or the appliances left visible. Integrated fronts need to be ordered with the appliance, not after it.
  • Lighting. Under-cabinet strip, internal lighting in glass-front display units, and where the transformer sits — a detail that becomes expensive to change once panels are cut.
  • Worktop edge and upstand. Whether the worktop returns into the wall, whether there is a splashback of the same material, and how the hob is mounted.
  • Tall and pantry units. Full-height doors or a split; whether the refrigerator housing is flush or proud.

On our custom minimalist kitchen cabinets for home renovation, the standard build is flat panels with concealed or touch-to-open fronts, made to your dimensions from base units through wall units to pantry towers, in matte solid finishes or wood textures. The details above are exactly what we need back from a client before we can draw it properly.

Ask for the same deliverables from every supplier

Whatever you send, ask for the same return package in writing. It is the only way to compare suppliers on the product rather than on the salesmanship.

  • A set of elevations at a stated scale, with all heights and the direction of every door opening marked.
  • An itemised bill of quantities: units, carcasses, doors, worktops, fittings, lighting, by line, with each line priced.
  • The written specification of panel material, board thickness, edge treatment and finish system — not a product code alone.
  • A 3D visual or rendered elevation set, if the project is one where you need to see the room before committing.
  • The packing list format and container split, so your site team knows what arrives together.

If a quotation arrives as a single price per metre with no breakdown, ask for the itemised version before you agree anything. A per-metre figure is convenient to read and impossible to compare.

What to expect back, and in what order

A custom cabinet project runs through a predictable sequence. Knowing it prevents the common panic of waiting on a drawing you were never going to receive at that stage.

  • Brief and measurements. The material above, in one package rather than four emails.
  • Design proposal and quotation. Elevations plus the itemised price. Expect to revise this once; it is a working document.
  • Detail confirmation. Final sizes, finishes, appliance interfaces, internal fittings. This is the point at which changes stop being free.
  • Production and inspection. Ask what is inspected before packing and whether you receive photographs of the packed units.
  • Shipping and delivery. Incoterms, container loading plan, documents included. For an overseas order, confirm who handles customs clearance at your end.
  • Installation and handover. Whether an installer attends, or whether the package ships with fixing details for a local trades team.

Our own service steps are brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up — the same sequence any supplier should be able to put in writing for you.

Five questions worth asking a cabinet manufacturer directly

How are tall units constructed, and can they be split?

A full-height pantry tower may need to be built in two sections for transport and for a narrow site access route. Ask when this decision is made and who confirms it — you do not want to learn about it after the panels are cut.

What tolerance do you design to at walls and ceilings?

In a renovation, walls are rarely plumb. Ask how scribing is handled: an integral scribe panel, an adjustable filler, or on-site trimming by your installer.

Which fitting brands are in the base price, and what does the upgrade cost?

Get the hinge, slide and lift-system brands named on the quotation. Soft-close as standard is not the same as soft-close as an option.

Can you supply matching joinery for the rest of the house?

A kitchen in a renovated home rarely stands alone. Wardrobes, media units, sideboards and tall storage in the same panel and finish specification avoid colour mismatch between rooms. We supply custom built-in kitchen cabinets as interior fixtures for hotel, apartment and residential projects, and matching cabinetry elsewhere in the same building is a normal part of that scope.

What happens if a panel is damaged in transit?

Ask how replacement panels are produced and shipped, and what information you need to record on delivery for it to be actioned.

One habit that saves the most rework

Send a physical or digital sample of the finish you expect before production starts, and ask the manufacturer to confirm in writing that the panels will match that sample. Colour names travel badly between countries and between factories; a reference panel does not.

If the cabinets are part of a wider fit-out

When the kitchen sits inside a whole-house renovation or a hospitality project, cabinetry is only one line in a longer list that also includes flooring, wall and ceiling finishes, doors, wardrobes, lighting and loose furniture. Splitting those across separate suppliers multiplies the coordination work: different finish references, different delivery windows, different installers on site.

As a China-based furniture and building materials manufacturer, we supply across that range under one project scope — design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover. For a renovation where the kitchen sets the finish language for the rest of the home, that single point of contact is usually where the saving actually appears.

Send us your measured plan, the appliance list and the seven decisions in the table above, and you will get elevations and an itemised quotation back rather than a price per metre.

SANTERSON — custom furniture and building materials, turnkey project supply since 2008.

Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com

Enquiries: https://www.santerson.com/contact/

Product and finish specifications, dimensions and project scope are confirmed individually for each order. Figures and details quoted by any supplier should be checked against your own site survey before production is authorised.