A freestanding cabinet line is often the smallest package in a commercial fit-out and the one that gets signed off last, which is exactly why proposals go wrong. The unit arrives on site, sits where it should not, clashes with the joinery finish schedule, and the variation cost lands on whoever approved the drawings. If you are sourcing storage for a villa, serviced apartment, show flat or hospitality project through SANTERSON, the proposal you receive is configurable in almost every respect — which means the review stage is where you control price, programme and finish quality.

The checklist below follows the order a buyer actually works in: scope first, then specification, then supply terms, then site conditions.

1. Confirm which product family the quotation is actually pricing

"Freestanding" covers several different packages on this catalogue, and a proposal that only names the item loosely will drift during production. Two listings sit under Storage Units for bathroom projects — Santerson Freestanding Cabinets, alongside drawer units, corner storage and open shelving. A separate listing sits under Display Cabinets for living areas, Santerson Freestanding Cabinet, in the same family as curio cabinets and open display units. Media packages are priced separately again as Santerson Freestanding TV Cabinets.

Before comparing numbers, ask the supplier to restate each line with its product page reference and the room it serves. A single project usually mixes two or three of these families, and a quotation that bundles them under one price per linear metre hides very different carcass, door and hardware requirements.

2. Read the configuration clause carefully

Every freestanding listing in this range is described as project-specific: made-to-measure sizing, a choice of material and finish, and a layout tailored to the space. That is good news for design freedom and bad news for comparison shopping, because two proposals that look identical on price per unit may not be specifying the same thing.

For each line item, confirm in writing:

  • Overall dimensions plus the tolerance you are allowing on site, and who measures — the supplier from your drawings, or a site survey after the slab and screed are down.
  • The carcass material and the door or panel material, stated separately. Finish names that sound similar across ranges are not interchangeable once they meet different light conditions.
  • Door type and opening direction, drawer count and runner type, and whether shelves are fixed or adjustable.
  • Whether the unit is freestanding against a wall, recessed, or butted into adjacent joinery — this changes scribe pieces, skirting cuts and the visible return edge.

The product pages themselves carry a standing note that dimensions, materials, finishes, hardware and installation requirements must be verified for each selected configuration. Treat that as part of the contract language, not boilerplate.

3. Check what is priced in and what is an option

Three items routinely appear as add-ons on freestanding cabinet packages, and each one is easier to approve at proposal stage than after production starts:

  • Integrated lighting. Santerson Integrated Cabinet Lighting is listed as its own configurable item. If display niches or glass-fronted sections are in the design, ask for the driver location, the switching arrangement and the cable routes on the shop drawing. Electrical specification and compatibility should be confirmed against the specific cabinet design.
  • Glass and display components. Glass-fronted variants and shelving accessories are separate listings, so a base price that looks competitive may exclude the glazed doors your design shows.
  • Small bathroom hardware. Mirror cabinets, towel warmers and rails and shelving accessories are individually specified. Bundling them into the same order keeps finishes consistent; leaving them out invites a mismatched second purchase.

4. Judge the supplier's coordination scope, not just the unit price

Freestanding cabinets rarely fail on their own. They fail where they meet flooring, wall finishes, plumbing and lighting. That is the argument for placing them inside a wider package rather than buying them as an isolated line. SANTERSON is described on its own site as a one-stop furniture and building materials supplier, with services covering interior design support, custom and OEM production, logistics and door-to-door delivery, then installation and after-sales support.

In practice that means the same team can align your cabinets with vanities, wall-mounted storage, engineered flooring and wall panelling from one production schedule. When you evaluate the proposal, ask specifically which of those services are included in the quoted price and which are quoted separately — design coordination, shop drawings, packing and container loading, delivery terms, and on-site installation guidance are each worth pricing explicitly rather than assuming.

For buyers comparing several vendors on furniture sourcing for Australian projects, the practical differentiator is rarely the cabinet itself. It is whether one supplier will reconcile the storage package against the rest of the fit-out and take responsibility for the interface details.

5. Verify quantities, sequence and delivery against site programme

Ask for the packing list and container plan before you approve production. A commercial project usually needs storage units in a specific installation order — bathrooms first, living-area display pieces later — and mixed containers turn into storage costs and double handling on site.

Then check three dates against your programme: drawing sign-off, production start, and the delivery address named on the quotation. Confirm who handles customs documentation and who receives goods at the end point. Delivery scope and transit arrangements should be confirmed for each project rather than carried over from a previous order.

6. Run a snag list before sign-off

Before you return the signed approval, walk this list once:

  • Does every line item name its product page, room and configuration?
  • Are dimensions tied to a site survey or to design-stage drawings? Which one governs?
  • Is the finish reference written as a code or sample number, not just a colour name?
  • Are lighting, glass, handles and mirror cabinets either included or explicitly excluded?
  • Do the installation notes say who fixes the units to the wall and who makes good around them?
  • Is there a named contact for production queries and for after-sales issues, with the channel they answer on?

A proposal that survives those six questions is one you can approve without guessing. A proposal that does not will be resolved later — at your cost, on site.

Send us the room schedule and drawings for your storage package and we will return a configuration-by-configuration proposal with finishes, dimensions and delivery terms stated line by line. Contact SANTERSON to start the review.