A quote for European oak parquet engineered wood flooring can look complete on paper and still leave a buyer unable to compare it with the next offer. Two proposals for what appears to be the same parquet pattern can differ in wear layer, board format, finish system, packing, and what is actually included in the price. The difference usually shows up later, on site, when boards arrive that do not match the approved sample or when the delivery terms turn out to exclude what the buyer assumed was covered.

The practical way to assess a proposal is to read it as a specification document rather than a price. Below is the sequence we suggest for villa, apartment and hospitality buyers working with a China-based flooring manufacturer.

1. Check what the construction description actually says

Engineered parquet is a layered product. A serious proposal states the top layer and the carrier separately, because those two items drive price more than the pattern name does. On our own product pages we describe these boards as having a 3 mm solid oak wear layer over a multilayer base, which is the construction we recommend for residential living rooms, bedrooms and premium interior projects.

When you read a proposal, look for three lines in particular:

  • Wear-layer thickness — stated in millimetres, not as “thick oak layer”. This determines how the floor can be refinished later and how the grain reads once laid.
  • Carrier and build-up — a multilayer base is specified for stability and reduced deformation. Ask what the backing layers are and how the lamella is fixed to them.
  • Board and module format — plank size, parquet module size, thickness overall, and the tongue-and-groove or click detail at the edge.

If any of these three are missing, the proposal is not comparable yet. Ask for them in writing before you discuss discount.

2. Match the pattern to the room, not the photograph

Parquet and herringbone read completely differently once they cover 80 m² instead of the sample board on a desk. Herringbone lays strong diagonal lines that organise a formal entrance hall or reception, while square parquet modules give a quieter grid that suits sitting rooms and bedrooms. A good proposal names the pattern precisely and states which direction the lamellae run relative to the main light source and the room’s longest wall.

Our catalogue covers both formats in European oak, including European oak herringbone engineered wood flooring and the wider engineered wood flooring range. If a supplier offers only one pattern, ask whether the alternative format is available at the same wear layer, because changing pattern should not mean changing build quality.

3. Read the finish and colour description as a specification

Colour names are marketing shorthand; two factories can call the same tone “natural” and ship very different boards. What matters is how the proposal describes the surface treatment: smoked, brushed, wire-brushed, smoked antique, stained, oiled or lacquered, and whether knots and mineral streaks are retained or graded out.

The range illustrates why this detail is worth pinning down. A light tone with smoked antique craftsmanship keeps visible knots and a soft rustic character; a warm smoked finish leans classic; charcoal boards with bold grain read sleek and modern. Ask the manufacturer to state the finish system and the number of coating passes, then approve a physical sample against that written description.

4. Confirm substrate and heating compatibility in writing

For underfloor-heated slabs, the proposal should state explicitly that the construction is compatible with heating, and it should also address subfloor preparation and moisture control. Engineered multilayer construction is chosen precisely because it moves less than a solid board, but no construction tolerates a wet screed.

Before you accept a price, get written answers on: acceptable subfloor moisture content, whether an underlay or adhesive system is included, expansion-joint allowances for large continuous areas, and the acclimatisation period expected before installation. A manufacturer who answers these specifically is far easier to assess than one who answers “it works everywhere”.

5. Test what the price line actually includes

Flooring quotations diverge most often on scope rather than on the board itself. Compare proposals line by line on:

  • Price unit — square metre or carton, and whether the wastage allowance for your layout is included or added later.
  • Trims and accessories — edge trims, stair nosings, transition pieces, adhesive, underlay.
  • Packing — carton labelling by shade and size, pallet arrangement, corner protection for long planks.
  • Freight terms — the Incoterms basis, and whether delivery runs to site or to port. Our logistics and door-to-door delivery service covers freight by sea, air and rail with customs paperwork handled on our side, so a buyer comparing that against port-only pricing needs the terms stated clearly.
  • Shade consistency — whether one production batch is guaranteed for the whole order, and how offcuts are reserved for later repair.

6. Ask the questions that reveal manufacturing depth

A supplier who can answer these in detail usually has the process behind them; one who answers vaguely tends to be trading someone else’s boards.

  • Which grade of European oak is used, and what is graded out at the sorting stage?
  • Can board size, wear-layer thickness or finish be adjusted for this project? Our custom and OEM service covers bespoke finishes and textures with flexible order quantities, so we can answer that question at the specification stage rather than after tooling.
  • What quality control runs between cutting, coating and packing, and can a pre-shipment photo set be provided?
  • How are claims on warped, mis-machined or off-shade boards handled, and who supports installation queries once the floor is on site — the details behind our installation and after-sales support.

A short comparison sheet before you sign

Put every proposal into the same table: wear layer, carrier, board format, pattern, finish system, colour reference, heating compatibility statement, wastage basis, trims included, packing standard, freight terms, batch control, sample approval status. Two offers that looked similar at quote level usually separate clearly once they sit side by side in that format.

If you are specifying parquet for a villa or apartment project and want a proposal written to that standard, send the floor plan, room areas and your preferred tone to our team. We will confirm construction, finish and packing against your drawings and quote the full scope, so the number you compare is the number you pay.