An L Shaped Corner Wardrobe is one of the easiest built-ins to specify on paper and the easiest to get wrong in production. Two runs of cabinetry meeting at a corner means two sets of heights, two returns, and a shared return line that has to land flush against plaster, skirting and flooring that someone else installed. When you buy from a local joiner you accept their workshop drawings and their site survey. When you source the same item through OEM manufacturing, you are buying a process instead: your drawings become their cutting lists, and the questions below decide whether the two match.
What "OEM" Actually Changes for a Corner Wardrobe
In an OEM arrangement the manufacturer builds to your specification rather than to their catalogue. For a corner wardrobe this is not marketing language — it changes four concrete things:
- Dimensions are yours. Our L Shaped Corner Wardrobes in the Corner Wardrobes collection are made-to-measure, so height, return lengths and depth come from your drawings rather than a standard module.
- Layout is yours. Hanging rail heights, drawer banks, shelving and corner access hardware follow the room, not a fixed internal plan.
- Finish is yours. Door style and surface — hinged or sliding fronts, matte lacquer, melamine, veneer, glass panels or aluminium frames — are specified per project.
- Your identity can be on the product. The Custom & OEM service covers brand marking and packaging where a buyer needs the wardrobe to carry their own label rather than ours.
The trade-off is symmetrical: an OEM supplier will not adjust your design for you unless you ask, and nothing gets corrected after panels are cut. Everything that follows is about getting the specification right before it enters production.
The Seven Stages of an OEM Corner-Wardrobe Order
- 1Brief. You send room dimensions, the intended user (a single villa bedroom, a hotel guest room, a serviced-apartment handover), and what the corner has to hold. Vague briefs produce wardrobe boxes; specific briefs produce storage.
- 2Drawing review. Your drawings are read against our production methods. Where a detail cannot be built as drawn, it comes back as a query before the order is priced — not after.
- 3Specification and quotation. Materials, board structure, door type, hardware brand and finish are listed line by line, so the price can be compared against another supplier on like-for-like terms. This is the stage where custom furniture and OEM manufacturing scope is written down.
- 4Confirmation. Signed drawings, a finish sample or approved colour reference, and the final opening dimensions. Corner units are confirmed against finished floor levels and finished wall faces, because a 15 mm screed change moves both returns.
- 5Production. Panels are cut, edged, surfaced and assembled into sub-assemblies, then checked against the confirmed drawing before packing.
- 6Packing and shipping. Corner wardrobes ship as component sets with numbered panels and hardware kits, packed for container loading. Door panels and glass elements are separated so transit damage is contained to replaceable items.
- 7Installation and handover. Panels go on site, the corner return is aligned, doors are adjusted, and remaining defects are recorded as a snag list. Where we handle installation, that list is closed before handover.
The cooperation sequence we describe for interior design projects — brief and proposal, quotation and detail confirmation, then production, shipment and follow-up — maps directly onto these stages, which is why a single supplier handling both the wardrobe and the adjoining joinery tends to produce fewer arguments on site.
What You Specify, Line by Line
1. Geometry and the corner itself
Send wall-to-wall lengths on both legs, the corner angle, room height at the corner and away from it, and the position of doors, windows, radiators and switches. State whether the corner is a true 90° or something the survey found otherwise — an out-of-square corner is handled with scribing and filler panels, not by pretending the drawing is right.
2. Door type, because it sets the whole layout
A hinged front needs clearance to swing; a sliding front needs a track and an overlap zone but no swing radius. In a tight bedroom that single decision changes how deep the return can be and whether the corner bay is usable at all. Compare Hinged Door Corner Wardrobes with Sliding Door Corner Wardrobes against the actual circulation width in the room, not against a showroom.
3. Internal configuration
Decide what the corner bay does: hanging rail across both legs, pull-out carousel, shelving with a blind corner, or a drawer bank stacked under short hanging space. Send the garment lengths you need to hang — long dresses and coats set a rail height that shelving above cannot encroach on.
4. Materials, boards and finishes
Board type, edge treatment, door construction and surface are named in the specification. For guest-room programmes we build the same door profile across many rooms with one approved finish reference; for a villa, two-tone or veneer fronts are usually specified per room. Whatever is chosen, get a physical sample before production rather than a screen image.
5. Hardware and moving parts
Hinges, slides, lifts, handles and any integrated lighting are listed with brand and model, because hardware is where quotations diverge most and where substitution hurts most on site. Specify soft-close, load rating and the number of cycles expected in a rental or hotel context.
6. Interface with other trades
State who supplies skirting, architrave, cornice, flooring under the unit, and the wall finish behind it. A built-in wardrobe ordered to a drawing that still shows skirting will arrive at a room where the skirting has already been removed — or worse, will not sit flat against it.
7. Branding and packaging
For developers and resellers who take delivery under their own label, engraving, embossing, logo application and packaging can be included in the OEM scope. Agree this at quotation stage; adding a brand requirement after panels are surfaced is not a small change.
Where Corner-Wardrobe OEM Orders Fail, and How to Close It
- Dimensions taken off architectural drawings instead of the built room. Fix: measure on site after plaster and finished floor levels are complete, and record both minimum and maximum at each leg.
- No allowance for out-of-square corners. Fix: specify scribing or filler panels in the drawing so the fitter has an adjustment range on site.
- Door swing clashes with the bed, an en-suite entry or a radiator. Fix: mark furniture positions and door arcs on the plan before choosing the front type.
- Hardware quoted generically. Fix: brand and model in the specification sheet, with substitution only by written agreement.
- Finish approved from a screen. Fix: physical sample signed off and kept as the reference for every unit in the order.
- One delivery date assumed for everything. Fix: split the wardrobe from adjoining joinery if the site sequence differs, and say so at confirmation.
Buying One Villa Wardrobe Versus a Guest-Room Package
A single villa unit is usually a specification exercise: unusual heights, a curved or angled corner, mixed materials. A multi-unit order — an apartment block, a hotel floor, a build-to-rent scheme — is a repeatability exercise: one approved detail package, one finish reference, and a configuration that tolerates small dimensional differences between rooms. Minimum order quantities vary by product and specification, so state the unit count and the room mix at enquiry stage rather than after the design has been drawn.
As a furniture and building materials manufacturer working on villa, hospitality and office projects, we can carry the same corner wardrobe detail across adjoining items in the job — L Shaped Walk in Wardrobes, vanity units, kitchen cabinetry and wall panelling — so one door profile and one veneer run covers several trades instead of several separate approvals.
Cost Drivers You Can Control
- Panelling height. Floor-to-ceiling fronts need site adjustment; a soffit box is usually cheaper and easier to fit.
- Corner access hardware. Carousels and pull-out baskets cost more than shelving and add installation time.
- Door construction and surface. Veneered and lacquered fronts sit above melamine; glass inserts add handling and packing care.
- Repetition. Reusing one configuration across rooms reduces both unit price and site labour.
- Packaging and container loading. Component-packed sets load more densely than partly assembled boxes, which matters on a shared container.
Ask for the quotation broken down by configuration rather than as one line per room. A single "wardrobe — 12 rooms" figure cannot be compared with anything, and hides exactly the substitutions you want to prevent.
Questions Worth Asking Before You Commit
- Which drawing details will your workshop change, and can I see those comments before I confirm?
- What is the tolerance range on opening dimensions for a corner unit?
- How are panels numbered and packed so an installer knows which return goes where?
- What comes in the hardware kit, and what do I supply locally?
- If a panel arrives damaged, what has to be reproduced and how is it shipped?
- Who signs off the finish reference, and is it kept for the whole order?
Send us the room, not just the product name
For an L Shaped Corner Wardrobe on a villa, apartment or hotel project, send the room dimensions, your drawings and the unit count. We will return the specification with production queries marked, so the corner is resolved on paper before it reaches site.