An eight-metre swim spa is a serious line item on a villa or resort schedule, and it is one of the few products where the specification sheet alone can decide whether the installation runs smoothly or turns into an expensive argument on site. Outdoor Swim Spa WS-PC08U sits in SANTERSON's configurable outdoor swim and hydrotherapy range, and it is a good example of the questions a buyer should have answered in writing before a purchase order is raised. The sections below walk through what the catalogue states for this model, what those figures mean for your site works, and which details to confirm with the factory before you commit.

What the WS-PC08U catalogue entry covers

The published entry lists a shell of 8000 × 3000 × 1500 mm, with one control system, four water pumps, one filter pump, a jet total of 33 pieces, one LED light and a total power figure of 11.85 kW. The features shown for this model are water jets, LED lighting and ozone. Notably, the captured specification block does not list a swim training system for WS-PC08U, so if lap swimming or resistance training is the reason you are specifying an eight-metre shell, treat that as the first open question rather than an assumption carried over from a neighbouring model.

Read together, these figures describe a hydrotherapy-led unit: a high jet count spread along a long, wide shell, supported by several water pumps and a single filtration circuit. That profile suits private villas, resort garden installations and wellness areas where soaking, massage seating and evening ambience matter more than swim resistance.

Reading the dimensions against your site

The 3000 mm width in the catalogue entry is generous for a swim spa, and it is what allows multiple jet stations and seating positions along an eight-metre run. The practical consequence for procurement is that the pit, deck surround and access route all have to be dimensioned from the same drawing set. Before you sign off any civil works, ask for the outline drawings for the exact configuration you are buying, then check three things against them: the working clearance needed around the plant compartment and filter pump, the position of the steps if steps are included in your order, and how the 1500 mm depth is measured at the coping or rim.

Water depth shapes step and handrail detailing, child-safety expectations and how the unit reads from an adjacent terrace or pool deck. Those are decisions for your designer and for the authority that reviews your permit; a product catalogue cannot settle them for you.

Power, pumps and what to hand your electrician

The 11.85 kW total power figure in the WS-PC08U specification is a starting point for electrical design, not the finished design. Four water pumps plus a filter pump plus controls means the supply arrangement, protection and control wiring are planned around the configuration you order — and a heat pump or additional options change the load again.

Ask for these in writing before ordering

  • The supply arrangement for the selected build: phase, voltage and circuit protection.
  • How much of that 11.85 kW is pumps, controls and lighting, and what a heat pump would add.
  • Which items are included in the quoted price and which are options on the same order.
  • The plant access and service clearances your civil drawings must reserve.

Buyers who request this early avoid the common failure mode of swim spa projects: a shell that arrives on time but cannot be connected because the local electrician was handed an incomplete load schedule.

Configuration options and where comparisons help

The range is configurable, and catalogue-listed options include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so an option described for one shell is not automatically available on another. That matters most when you are comparing variants side by side.

Two near-neighbours in the same eight-metre family show why. WS-PC08T is listed at the same 8000 × 3000 × 1500 mm envelope but with a swim training system, 28 jets, three LED lights and 10.85 kW. WS-PC08ST is narrower at 8000 × 2400 × 1470 mm, lists a swim training system with six jets, four LED lights and 6.55 kW. Same length, three different briefs: hydrotherapy volume, swim training in a full-width shell, or a slimmer footprint with a lower connected load. Decide which of those the project actually needs, then let the specification follow the decision instead of the other way around.

Water treatment and daily running costs

Ozone is listed as a feature for WS-PC08U, with UV sterilisation available as an option. What you should expect from either is a lower sanitiser demand, not the end of routine water chemistry: pH and sanitiser levels still need checking on whatever maintenance schedule your facility operator adopts. Ask the factory what dosing, filtration and cleaning tasks the selected build assumes, and who supplies consumables such as filter media once the unit is in service.

Insulation and heat pump options deserve attention for the same reason. In an outdoor installation the shell insulation and cover arrangement shape how much energy is spent holding water temperature between uses, which is where most of the running cost sits over a year of ownership.

Delivery, installation and after-sales

A swim spa arrives as a crated, heavy unit that has to be lifted into position before the surrounding deck is closed up, so logistics belong in the buying decision rather than after it. As a one-stop furniture and building materials supplier, SANTERSON publishes services for logistics and door-to-door delivery and for installation and after-sales support. In practice that means freight, packaging and container loading can be arranged by the same party who built the shell.

Treat those service pages as a scope to be confirmed on your specific order: import terms, duties, delivery point, lifting equipment, site access and warranty terms all need to be agreed in writing, and permit and electrical requirements are always yours to verify with the relevant authority where the unit is installed.

A short pre-purchase checklist

  • Confirm whether a swim training system is included for WS-PC08U in your configuration, since the catalogue does not list one.
  • Verify dimensions from outline drawings for the exact build, including coping detail and plant access.
  • Reconcile the 11.85 kW figure with your supply arrangement and any heating option you intend to add.
  • Price options such as UV sterilisation, sand filtration, insulation and steps on the same quotation, so comparisons are honest.
  • Agree delivery point, lifting, installation scope and after-sales terms before civil works begin.

Make an informed buying decision about Outdoor Swim Spa WS-PC08U by settling the use case first — hydrotherapy or swim training — then having every figure on the specification sheet confirmed against your configuration and your site. Send us your drawings and required configuration and we will quote the build with those points answered.