Smoked glass reads as a simple choice on a specification sheet: one tint, one look. On site it is rarely that clean. A wardrobe that photographs well in the showroom can look heavier than intended against a pale wall, or so reflective under downlights that the bedroom mirrors itself back at you. The difference almost always sits in details that get confirmed too late — after the order is placed and the carcasses are already in production.
If you are specifying smoked glass wardrobes for a villa, apartment or hospitality room package, the questions below are the ones worth putting in writing before production starts. They apply whether you order through our custom and OEM service or select from an existing wardrobe collection.
Start with the tint, not the product name
"Smoked" covers a wide band of grey-to-bronze tints, and the same glass can read warm or cold depending on what is behind it. Two things settle it faster than any data sheet:
- ✓Ask for a physical sample of the exact glass batch, not a rendered image or a swatch from an older run.
- ✓Hold that sample against your own wall finish, flooring and ironmongery under the room's actual lighting before you sign off. Colour temperature shifts the perceived tint more than most buyers expect.
- ✓Decide what should be visible through the doors. Smoked glass softens what is inside rather than hiding it, so an interior that will show through needs to stay tidy once handed over.
Confirm how the tint behaves across the whole set
Tint is a coating and body-colour question, and it shows up as an inconsistency problem when panels come from different batches. Where a design mixes smoked glass with other materials — timber fronts, lacquered panels, an aluminium-framed door line — the mismatch becomes obvious at the join.
- ✓Order all glass for one room or one unit from a single production batch, and state that on the purchase order.
- ✓If the project splits across phases, keep spare panels from the approved batch rather than re-ordering tint later.
- ✓Ask whether the finish is applied to one face or both. That determines how edge polishing and mitred corners read once the doors are up.
The same discipline matters if you extend smoked glass beyond the bedroom. Our smoked glass aluminium cabinets sit in a different collection with different frame profiles, so matching tint across kitchen and wardrobe lines needs to be requested explicitly rather than assumed.
Frame, edge and hardware are separate decisions
Buyers often approve the glass and leave the frame until later. That is backwards: the frame sets how much glass you see, and the edge treatment sets whether the tint looks deliberate at close range.
| Detail | What to confirm in writing |
|---|---|
| Frame profile | Slim aluminium frame, or a glass door with no visible frame. An aluminium frame wardrobe breaks the glass into panels and changes how the tint reads across a wide elevation. |
| Frame colour | Black, bronze or natural aluminium against smoked glass produces three quite different elevations. Confirm the finish on a sample offcut. |
| Edge work | Polished, ground or bevelled edges on visible glass. Specify which edges are exposed once the door is installed. |
| Opening method | Sliding or hinged. Sliding needs clearance and track detail resolved early; see glass sliding door wardrobes for that route. |
| Interior fit-out | Shelving, drawers and hanging configuration. These sit behind glass, so their colour and material are part of the visible finish. |
| Lighting | Integrated cabinet lighting reflects straight off smoked glass. Decide fixture position before the carcass is built. |
Model references and dimension ranges vary by collection, so treat any figure in a brochure as indicative and confirm the specification for your own unit.
Get the measurement method agreed before anything is cut
Glass has almost no tolerance for error, so the survey standard matters more here than it does for a timber-fronted unit. For made-to-measure work we size to the project, but who takes the final dimensions and when should be settled at quotation stage.
- ✓Confirm which trades set out floor, wall and ceiling finishes before the wardrobe is surveyed, and in what order.
- ✓State who signs off the final on-site dimensions — our team or yours — and whether a re-survey is included.
- ✓Record floor level, skirting detail and any services that run behind the unit. A 10 mm variation at the base shows up at the head.
"Glass tint, frame profile and frame colour approved on physical sample reference [___], batch ___; final dimensions surveyed on site by [___] on [date]." That single sentence closes most of the disputes that appear at handover.
Delivery, protection and installation
Glass doors travel badly when they are packed like furniture. Ask how panels are crated, whether they ship with the carcasses or separately, and how the receiving team should store them before installation.
- ✓Confirm crate type and orientation, and whether panels are glazed at the factory or on site.
- ✓Agree who inspects for transit damage on arrival, and within what window claims need to be raised.
- ✓Book installation while the frames are still adjustable, so alignment can be corrected before sealants and trims go on.
Our logistics and door-to-door delivery service covers freight coordination and paperwork; the installation and after-sales stage is where final glazing, alignment and snagging happen. Confirm what is included on your specific order rather than reading it off a service page.
A short pre-production checklist
- ✓Physical glass sample approved under the room's own lighting, with the sample reference recorded.
- ✓Frame profile and colour approved on an offcut.
- ✓Interior fit-out materials chosen, because they are visible through the doors.
- ✓Final on-site dimensions signed off with a named party and date.
- ✓Crating, arrival inspection and installation sequence agreed in writing.
Work through those five items before production opens and smoked glass stops being a risk item. It becomes the detail buyers compliment — provided the tint was chosen in the room it will live in.
SANTERSON is a China-based furniture and building materials manufacturer supplying made-to-measure wardrobes, cabinetry and interior fixtures for villa, hospitality and office projects. Send us the elevation drawing, room lighting notes and target programme, and we will confirm glass options, frame details and pricing for your unit.
Project references we can talk through include villa fit-out work in Willoughby, Perth, North Turramurra, Melbourne and Sydney. Ask about those to see how joinery and glazing packages were coordinated on site.