A rendering of a bedroom with a full-height, mirror-finish wardrobe is easy to approve. What stalls afterwards is rarely the design intent — it is the missing information behind it: which wall, which ceiling height, which door system, which interior fit-outs. If your brief already answers those questions, the High Gloss Veneer Wardrobes enquiry can move straight into quotation instead of three rounds of email clarifications. The checklist below is the one we use internally when a villa or apartment project comes to us for made-to-measure built-in wardrobes.

What the design brief usually already gives you

Most briefs arrive with a look: a warm timber tone, a reflective front that lifts a narrow corridor, a handleless façade that reads as a wall. That is genuinely useful, and for this product family it maps to something real — High Gloss Veneer Wardrobes sit inside our Wood Veneer Wardrobes collection, where finish, layout and dimensions are specified per project rather than chosen from a fixed size grid.

What a look alone cannot decide is whether the unit reaches the ceiling, how it clears skirting and cornices, whether doors swing or slide past a bed, and what sits inside. Those are the decisions we need from you before a drawing can be issued.

Six items to settle before you send the enquiry

1. The opening, measured in three places. Send width, height and depth at left, centre and right — not one average figure. Ceilings in renovation work are rarely level, and a single number is the most common cause of an on-site gap at handover. Note floor finish too: a wardrobe built over tiled flooring versus a screed line changes the base height.

2. Obstructions drawn, not described. Switch plates, air-conditioning returns, downlights, radiators, an out-of-plumb corner, a door architrave that will be removed. A marked-up photograph of each wall does more than a paragraph of text.

3. Door system and clearance. Hinged doors need swing clearance in front of the unit; sliding doors need depth in the carcass and a clear run. Tell us what stands in front of the wardrobe — bed, ottoman, column — and how much circulation space you want to keep.

4. Interior configuration room by room. Hanging height for long garments, shelf spacing for folded stacks, drawers versus open trays, a mirror panel, lighting inside the carcass. If different bedrooms need different internals, say so; a single wardrobe does not have to serve every occupant the same way.

5. Finish reference and sheen expectation. A high gloss veneer front reflects the room, which is exactly why the sample matters. Lighting in a showroom and lighting in your bedroom are different, so tell us whether the space is north-facing or lit mainly by artificial light, and confirm the wood species and tone you are working towards.

6. Programme and delivery point. Site completion date, when built-in furniture must be installed relative to painting and flooring, and where goods land — plot, apartment block, or a builder's depot. This shapes packing, shipment mode and the installation sequence.

How the enquiry becomes a confirmed specification

With those six items in hand, the process follows the same path we run for any custom built-in: brief and design proposal, quotation with detail confirmation, then production, shipment and follow-up. Our interior design services cover space planning, furniture layouts and 3D renderings, plus drawing and production coordination, so a project that has only a concept can still start from the checklist above.

For buyers comparing more than one finish in the same apartment, the wider built-in furniture range includes matte veneer, smoked veneer and oak veneer wardrobe fronts. Specifying them side by side at enquiry stage avoids three separate production runs for what is one joinery package.

Where the same timber tone has to carry through a whole floor — wardrobes, media wall, linen cupboard — custom and OEM service covers bespoke material finishes and textures alongside made-to-measure sizing, so tones are matched at the panel level rather than approximated later on site.

What we confirm back to you

Dimensions and selected specifications are confirmed for each project before production begins. That confirmation covers the carcass sizes as measured, door system and hardware, veneer species and sheen, internals room by room, and any interface details — cornices, skirting, reveals — that were flagged in your drawings. Once you sign it off, the order goes into manufacture; anything changed afterwards is treated as a variation, which is why the front-loaded detail saves money as well as time.

A short enquiry template you can copy

  • Project location and site type (villa, apartment, renovation or new build)
  • Room list with measured width / height / depth, three points per wall
  • Photographs of each wall, with obstructions marked
  • Door system preference per unit, and the clearance available in front of it
  • Internals required per room: hanging, shelves, drawers, mirror, interior lighting
  • Veneer species and sheen reference, plus a note on the room's lighting
  • Required site-delivery date and delivery address

Send that and we can return a proposal rather than a list of questions. If you are also sourcing other joinery or fit-out items for the same project, list them in the same enquiry — one coordinated package is easier to schedule, ship and install than several separate orders.

Common gaps that delay a quotation

A single average height instead of three measurements. A door type chosen without checking what stands in front of the wardrobe. A finish selected from a phone screen. Internals left to "standard". Each one is solvable, and each one costs another round of correspondence before drawings can be issued — which is exactly the time you wanted to save by sending a brief.

If you have the measurements and the finish reference ready, send them through and we will come back with a proposal for your High Gloss Veneer Wardrobes enquiry. If you only have the concept, start with the checklist and we will help you fill in the rest.