Pull out laundry hampers look like a small line on a joinery schedule, yet they are one of the few built-in items that every occupant of a bathroom or laundry will use daily. When a hamper is documented only as "pull out hamper, as per detail", the buyer inherits the ambiguity later: wrong cabinet width, basket type undecided, ventilation unconfirmed, and a variation order at the worst possible moment. The notes below follow what our Laundry Integration range actually offers — made-to-measure sizing, material and finish options, and a layout tailored to each project — and turn those three points into documentation that procurement can sign off before production starts.
Start with the product definition, not the drawing
Our Pull Out Laundry Hampers sit inside the Laundry Integration collection for residential bathroom projects. The page states three configurable parameters and one instruction: made-to-measure sizing, material and finish options, a layout tailored to the project, and confirmation of dimensions and selected specifications for each project. That is the whole scope, so it is also the checklist. Record each parameter as a separate line with a value, not as a general reference to "custom joinery".
| Item to document | What a clear entry looks like |
|---|---|
| Unit identification | Collection name (Laundry Integration), product name, room or unit reference, drawing number. |
| Opening and carcass size | Finished width, height and depth of the opening; who measured it and when; whether floor finishes are included in the height. |
| Basket arrangement | Number of baskets per module and how each basket is sorted (for example lights, darks, towels), stated per unit type. |
| Material and finish | Carcass material, door or panel finish, hardware finish — matched to the sample reference the client approved. |
| Surrounding items | Adjacent tall cabinets, vanities and laundry appliances that share the same wall or run, listed so sequencing is clear. |
| Sign-off status | Date of confirmed dimensions and specifications, plus who approved them. |
Dimensions: three questions that decide the detail
Because sizing is made to measure rather than offered in fixed widths, the drawing has to answer questions a standard catalogue item would answer for you.
- What is the finished opening, after wall and floor finishes? Note the tolerance band the site should hold and who is responsible for achieving it — the bathroom framer, the tiler, or the joinery installer.
- How does the drawer front align with the run? If the hamper shares a wall with Multi Function Tall Cabinets, record whether fronts are flush, recessed or continuous, and at what height the hamper front starts.
- What is in front of it when the basket is pulled out? Record the clear floor area needed for full travel, checked against the door swing and any vanity or toilet projection on site.
Where a unit type repeats across apartments or villas, document one governing dimension set per type and list exceptions individually. A single "typical" note with no exception list is how mismatches between the schedule and production files survive until delivery.
Configuration and finish: name what was approved
Material and finish options are useful only when the approved option is named. For each unit type, capture the carcass material, the door or panel finish, and the hardware finish as one combined entry, then attach the sample reference and approval date. Where a project uses two finishes on the same wall — a lighter tall cabinet above a darker laundry bay, for example — state which product carries which finish so the production file cannot be read either way.
Also record what is deliberately excluded: whether baskets are supplied by us or procured locally, whether an integrated lid or door is part of the module, and whether lighting inside the cabinet is included. Silence on these points is usually resolved later at the client's cost.
Layout decisions across the room
Hampers rarely stand alone. In a compact bathroom they are typically combined with vanities and storage; in a dedicated laundry they sit within a run that also carries appliances. Document the pairing per unit type — Compact Laundry Solutions where the room is small, Stacked Laundry Units where machines are stacked and the hamper occupies the bay beside them, or a Laundry & Storage Combo where detergents and linens share the same cabinetry. Naming the combination on the schedule keeps the layout consistent across repeated unit types and prevents different detailers solving the same wall differently.
One practical point for bathroom installations: record the ventilation route for the hamper compartment, the moisture exposure expected in that room, and which finish was approved for that condition. These are project-specific decisions, so they belong in the specification rather than in a generic note.
Site conditions and handover
- Confirm setting levels and floor heights before the carcass is fixed, and record who verified them on site.
- Record the protective packing each unit arrives in and how baskets and runners are handled between delivery and handover.
- Keep snag items tied to the unit reference — runner alignment, front gaps, soft-close adjustment — so inspection closes against the same code used on the schedule.
As part of our turnkey service, we take these items through a defined workflow: consultation, design and planning, production, logistics, installation and after-sales. Custom and OEM work covers bespoke finishes and prototyping; freight by sea, air or rail with customs paperwork and door-to-door delivery is arranged by our team; installation, inspection and snags are handled at the end of the job. Lead times, warranty terms, response targets and import arrangements vary by project and country, so we confirm them in writing per order rather than quoting figures here.
A short documentation checklist for procurement
- Unit reference, collection name and drawing number on every line.
- Finished opening dimensions with tolerance and responsibility stated.
- Basket count and sorting logic per unit type.
- Carcass material, finish and hardware finish with the approved sample reference.
- Adjacent products named so runs are sequenced correctly.
- Ventilation, moisture exposure and approved finish recorded for wet rooms.
- Exclusions listed explicitly: baskets, lids, internal lighting.
- Sign-off date and approver before production release.
Documenting these points takes a single pass through the joinery schedule, and it removes the variation requests that follow from vague entries. Send us the unit types, drawings and finish references you are working with, and we will return confirmed dimensions and specifications for each interior fixture in the laundry run before production begins.