A sliding wall that divides a banquet room, screens a lobby lounge or reopens a meeting floor in the middle of the day is specified far more often than it is properly compared. Most enquiries start with a panel sample and a price per square metre, which is exactly where comparisons go wrong. A Santerson Partition Sliding Systems quotation only becomes comparable once the buyer has fixed the opening, the track arrangement and the finish schedule in writing. The steps below are the ones we use when project teams ask us how to judge two or three offers side by side.
Start with the opening, not the panel
Partition sliding systems are made to measure, so every credible supplier begins with dimensional responsibility. Before you request pricing, record the clear opening width and height at several points along the run, the finished floor levels at both ends, the structural soffit or slab above, and where the panels stack when the space is thrown open. Sliding panels travel on track hardware, and the number of leaves, their widths and the stacking pocket all change the steelwork, the head detail and the door schedule.
Ask each supplier to confirm three items in their own words: who takes the site survey or verifies shop drawings, what tolerance band they build to, and which party signs off the opening before manufacture starts. A supplier who answers with a single price per square metre and no drawing stage is not offering the same product as one who returns a layout sketch, section details and a stacking diagram.
Compare the configurable scope line by line
Our own listing for this range states that finish, layout and dimensions are specified per project, with made-to-measure sizing and material and finish options, and it asks buyers to confirm track, hardware and opening dimensions for each project. That is the correct basis for a comparison sheet. Build one row for each of the following and fill in what every bidder actually includes:
- Panel core and face material, including the substrate behind any decorative finish
- Track profile, hanger hardware, floor guide arrangement and the load path into the slab above
- Maximum leaf width and height for the proposed configuration, and how leaves are coupled
- Acoustic construction, seal details at jambs and head, and the performance evidence behind any claim
- Finish schedule samples, edge trim and profiles, plus how dissimilar materials meet
- Fixing to floor and soffit, and what the site contractor must provide before installation
Two offers that look identical on a bill of quantities can differ by an entire hardware grade once these rows are complete. Where one supplier quietly prices a lighter track because the leaf heights were reduced, you have not compared like with like.
Check acoustic claims against the evidence file
Commercial buyers usually want the wall to do two jobs: divide visually and reduce travel of sound. If a partition matters acoustically, treat the claim as an item to be documented rather than assumed. Our Santerson Acoustic Sliding Panels page describes the same configurable approach — made-to-measure sizing, material and finish options — and asks buyers to confirm project requirements and the acoustic performance of the selected configuration. That is a deliberate statement: acoustic behaviour belongs to a build-up, not to a product family name.
In practice this means asking for the panel build-up drawing, the perimeter and interlock seal detail, and any test or calculation documentation your consultant will accept. A supplier who can produce a build-up drawing with named components is easier to evaluate than one who quotes a number without a section behind it.
Judge the supplier by how many trades they remove
Sliding walls rarely arrive alone. A hotel or office package usually needs the partition to match wall panelling, storage walls and joinery that already carry a finish schedule. When those items come from one manufacturer, the same sample board governs the whole run. Where they come from different sources, the project team carries the matching risk. That is why we position ourselves as a one-stop furniture and building materials supplier rather than as a single-product vendor.
Within the same sliding panel family, buyers typically specify Santerson Glass Sliding Panels where daylight must survive the division, and Santerson Textured Sliding Panels where the closed wall has to read as a designed surface. Where storage rather than separation is the driver, Santerson Sliding Storage Panels sit inside an integrated wall system. Comparing suppliers on a single line item misses this: the useful question is whether one factory can deliver the glazed leaves, the textured leaves and the adjacent storage wall from one drawing set.
SANTERSON has operated since 2008 as a China-based manufacturer of furniture and building materials, with turnkey work covering villas, hospitality and office projects. Our service path runs through consultation, design and planning, production, logistics, installation and after-sales, and our Interior Design Services cover space planning, furniture layouts and 3D renderings together with drawing and production coordination. For buyers comparing offers, that coordination stage is where a partition package either stays coherent or fragments.
Ask for the same deliverables from every bidder
The comparison only works if the documents are the same shape. Request the following from each supplier and score what arrives:
- A layout drawing showing leaf count, widths, stacking direction and the pocket
- Head and floor details naming the track, hangers and guides supplied
- A finish schedule with physical samples referenced by code
- A stated scope split showing what the supplier supplies and what the site contractor provides
- Freight terms, packaging and container loading plan for the shipment
- Installation method, snag inspection and spare-parts provision
Freight deserves the same scrutiny as the product. A partition shipped in panels that will not pass through your service corridor, or packed without protection for the decorative face, costs more on site than any saving on the unit rate. Our logistics scope covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery; confirm import terms, duties and Incoterms for each destination rather than assuming them.
Installation and after-sales are the last rows on the sheet. Our service pages describe on-site installation, inspection and snag lists, warranty coverage, spare parts and ongoing maintenance. Ask every bidder who installs, who supervises, and which components remain available for replacement once the hotel or office is in operation — hardware on a heavily used sliding wall will be adjusted and swapped.
Red flags that should cost a bidder the job
- A firm price quoted before any opening dimension or drawing has been confirmed
- Track and hardware described only as "standard", with no profile or load data
- An acoustic figure attached to a product name rather than to a stated build-up
- No stacking pocket shown, or leaves that cannot physically park where the plan allows
- Finishes matched by photograph instead of sample code, with no physical board issued
A practical sequence for the next four weeks
Week one: fix the use case for each opening — how often it divides, what must be hidden, whether sound or sightline is the priority, and what happens to the leaves when open. Week two: issue the same dimension pack and the six deliverables above to every bidder. Week three: compare build-up drawings, hardware schedules and scope splits, not headline prices. Week four: request physical finish samples and a sample leaf or hardware mock-up where the wall will see daily public use.
If you want to test us against that sequence, send the opening dimensions and the finish schedule for your project. We will return a layout with leaf count and stacking, head and floor details naming the hardware, and a made-to-measure proposal for the configuration you choose — including glass, textured or acoustic sliding panels where the specification calls for them.
Talk to SANTERSON about partition sliding systems for your project — contact PHILLIP, phone/WhatsApp +86-13928214007, email santerson@qq.com, or use the Contact Us page. Enquiries are answered within 24 hours, Monday to Saturday, 8:00 AM–6:00 PM (GMT+8).