A storage and display combination looks simple on a drawing: a wall unit with a screen in the middle, shelves either side, doors below. The price difference between two quotations for that same elevation, however, can be substantial. What changes is not the picture but what sits behind it — panel construction, how the carcasses are built and supported, which hardware is specified, and how far the technical drawing has been taken before the order is placed. This guide walks through the comparison points that matter when sourcing a Santerson Storage & Display Combo for a villa, apartment or hospitality fit-out.
Start with the wall, not the unit
The Media & TV Walls collection is made up of configurable systems rather than fixed catalogue sizes. Finish, layout and dimensions are specified to suit each space, so the first input a supplier needs is the room, not a model number. Before comparing two quotations, confirm that both were priced from the same measured elevation: overall width and height, ceiling line, skirting, door and window openings, and the position of existing power, data and aerial points.
Also fix the screen early. Screen size and whether it is fixed or on an articulating arm determine the recess opening, the ventilation gap, the load path into the wall or frame, and where devices and cable runs sit. A quotation that leaves the screen "TBC" is not a comparable quotation — it is a placeholder.
Compare the open-to-closed ratio first
The defining decision in a combo unit is how much stays on show. Open shelving displays books and objects and keeps a living room feeling light; closed storage hides remotes, consoles, board games and the clutter that makes a media wall read as untidy in photographs. Most projects land somewhere between the two, and the ratio drives both cost and daily usability.
If the balance is still open, look at the adjacent collections before committing to one layout. Santerson Mixed Open & Closed Storage sits in the Integrated Storage Walls group and suits rooms where storage capacity matters more than display. Santerson Open Display Units leans the other way, for clients who want objects and collectibles to be the point of the wall.
What to check in the specification sheet
- Panel and carcass make-up. Ask what substrate the carcasses are built from and what edge treatment is specified. The Custom & OEM service covers bespoke finishes, textures and material choices including wood, metals, engineered stone and laminates — so request the actual selection for your order rather than accepting "as shown".
- Hardware. Hinge brand and closing type, drawer runner type and load rating, and whether handles are specified or a handleless profile is used. Hardware is where quotations quietly differ.
- Shelf spans and loading. State the clear span of each shelf and what it is expected to carry. Long open spans sag over time if the board thickness and span are not matched, so get the intended duty on paper.
- Media recess and services. Confirm the recess dimensions for your screen, the ventilation provision, and how power, data and device cabling are routed and accessed for maintenance.
- Lighting. If you want lit niches or shelf lighting, confirm the fitting type, driver location and access point. Lighting needs to be resolved at drawing stage, not added after production.
Related configurations in the same family
Buyers often compare the combo against neighbouring options in the collection to see which detail actually solves their problem:
- Santerson Full Height Media Walls — for rooms that should read as a single floor-to-ceiling joinery element rather than a piece of furniture.
- Santerson Sliding Panel TV Systems — when the screen should be concealed when not in use; check panel material and mechanism requirements before pricing.
- Santerson Integrated LED Media Units — where integrated lighting is central to the design.
- Santerson Open & Closed Combo Units — a freestanding or wall-mounted alternative when a built-in wall system is not appropriate.
Ask how the unit is delivered and installed
A media wall is only as good as its installation, so treat delivery method as part of the specification. Ask whether the unit arrives as built-up modules or flat-packed panels, who carries out on-site installation, and how alignment, snagging and handover are handled. SANTERSON's stated workflow runs from consultation and design through production, logistics and door-to-door delivery to installation and after-sales support, with project management and site coordination included in the one-stop scope.
Confirm the practical details for your own project rather than assuming them: freight mode and Incoterms on the quotation, who receives and stores the crates on site, whether wall fixings and substrate preparation are in your scope or the supplier's, and what warranty terms and spare-part support actually cover. Import duties, transit time and local installer arrangements vary by destination and should be confirmed case by case.
A short comparison checklist
| Item to compare | What a clear answer looks like |
|---|---|
| Drawing stage | Dimensioned elevation with material, finish and hardware call-outs |
| Screen provision | Named screen or agreed size, recess dimensions, ventilation gap, mounting method |
| Storage plan | Open-to-closed ratio, shelf spans and duty, drawer and door schedule |
| Services | Power, data and device positions with access for maintenance |
| Lighting | Fitting type, driver location, switching and access |
| Delivery and install | Module build-up, freight terms, installer responsibility, snag list and handover |
Two quotations that look identical on a rendered elevation can differ in panel make-up, hardware, and how much technical resolution sits behind the drawing. Comparing them line by line against the checklist above is what turns an attractive picture into a buildable order.
Can the combo be sized to a non-standard wall?
Yes. The listing is configurable, with finish, layout and dimensions specified for each project. Send your measured elevation and screen choice, and confirm the storage configuration for that specific order.
Can finishes be matched to existing joinery?
SANTERSON's custom and OEM service covers bespoke finishes, textures and material selection. Share the sample, reference or existing joinery detail you need to match, and confirm the specified finish in writing before production.
Is installation included with a media wall order?
Installation and after-sales support are part of the stated service scope. Confirm for your project who installs, what site preparation is required, and the warranty and spare-part terms that apply.
Send your elevation drawing, screen size and finish preference to start a specification, or browse the wider product range to see how a media wall can be coordinated with cabinetry, lighting, flooring and wall finishes for the same project.
SANTERSON — furniture and building materials manufacturer, one-stop project supplier. Contact: PHILLIP, Phone / WhatsApp +86-13928214007, Email santerson@qq.com. Contact us