Glass open wardrobes sit at an awkward point in a bedroom fit-out. They are built-in joinery, so they have to be measured and manufactured to the room; they are also display furniture, so every shelf, hanging rail and panel joint will be visible from across the room. A sample order cannot tell you whether the layout works, and a site visit after installation is too late to change anything. The checklist below follows the order in which decisions actually have to be made, from opening type through to handover, so nothing that depends on an earlier decision gets locked in prematurely.

1. Opening configuration: what "open" and "glass" mean together

Start by writing down the configuration you are actually asking for, because the two words combine in more than one way. An open wardrobe is a carcass without solid doors — shelves, hanging zones and drawers on show, as in Glass Open Wardrobes. Add glass and you introduce glazed panels, glazed side returns or glass-fronted compartments within an otherwise open run. Related options in the same collections change the build differently: Metal Frame Open Wardrobes uses a metal-framed structure, while Glass Walk in Wardrobes treats the whole alcove as a glazed enclosure you step inside.

State the configuration on the drawing before any price is discussed. A run of open bays with two glazed end compartments, a full glass-fronted wall and a walk-in box are three different scopes with three different lead times and three different fixing details.

2. Room survey: the numbers that decide feasibility

Take the survey yourself rather than accepting a standard width, because built-in furniture only pays off when it fills the recess exactly. Record:

  • Width, height and depth at three points each — floors are rarely level and ceilings rarely parallel; note the smallest measurement and allow for packing.
  • Skirting, architrave and cornice — whether they are removed or scribed around, which changes the carcass shadow gap.
  • Switches, sockets, thermostat and downlights — mark their heights so a shelf does not land on a socket.
  • Door swing and circulation — for a glass-fronted or walk-in arrangement you need standing room in front of the glazing, plus clearance for any hinged or sliding door.
  • Floor finish build-up — carpet, engineered timber or tile thickness determines whether the unit sits on a plinth or is packed off the finished floor.

Send the sketch with dimensions in millimetres and note the room's other finishes. A supplier specifying from your drawing cannot guess at an unmarked return or a column.

3. Internal layout: zones before decoration

Lay out the interior by garment type, then by habit. Long hanging for coats and dresses; short hanging double-stacked for shirts and folded trousers; drawers below waist height for underwear and knitwear; shelves above eye level for items you reach rarely. Adjustable shelving keeps the layout revisable once you live with it.

Because an open wardrobe has no door hiding anything, plan what each bay will hold and what should stay out of sight. Many projects mix open bays with closed compartments — Combination Modular Wardrobes exists for exactly that split, letting you keep the display you want and hide the rest. Practical checks to write into the layout:

  • Hanging rail heights set by the longest garment plus a clearance allowance, not by a default dimension.
  • Drawer fronts that clear the carpet pile and any adjacent handle.
  • Integrated lighting — Integrated Cabinet Lighting needs a cable route, a driver location and a switch or sensor decided before the carcass is built.
  • Shoe, laundry and ironing storage located where you use them, so they do not end up as clutter on display.

4. Materials and finish: what to specify in writing

Specify each surface separately, since an open wardrobe exposes carcass edges, shelf faces and interior panels that a door would normally cover. For wood-based wardrobes the catalogue covers solid timber, veneer, melamine, lacquer and acrylic fronts — for example Natural Oak Veneer Wardrobes, Textured Melamine Wardrobes and Matte Lacquer Wardrobes. Glass choice changes the look more than the frame does: clear, bronze, smoked, frosted and ribbed glass all read differently against bedroom lighting, as seen in Bronze Glass Wardrobes, Smoked Glass Wardrobes and Frosted Glass Wardrobes.

For each item on the order, record the substrate, the surface material, the colour or decor reference, and the edge treatment. Edge banding and carcass colour are the details most often left out of an enquiry and most visible once installed.

5. Glass and safety details

Glass in a bedroom is a glazing specification, not just a colour choice. Confirm with the supplier for your project: glass type and thickness, whether toughened glass is used and where, edge finish (polished, ground or seamed), whether handles or pulls are required on glazed leaves, and how soft-close hardware is fitted. Also confirm how panels are protected in transit and what replacement arrangement applies if a panel arrives damaged or breaks later.

Check the glass against the room, not the sample board. Tinted and frosted glass behave differently under warm bedroom lighting and under daylight from an adjacent window; bronze and smoked glass both darken what is behind them, which is either a benefit or a problem depending on what you store there.

6. Hardware and moving parts

  • Hinges, slides and rails — ask what brand and duty rating is quoted, and whether soft closing is standard or an option.
  • Load allowance — hanging rails and shelves carry real weight once filled; confirm the quoted span for a shelf before you specify a wide open bay.
  • Sliding or hinged leaves — if part of the run is glazed with doors, check track and clearance requirements against your ceiling height. Glass Sliding Door Wardrobes and Glass Hinged Wardrobes show how the same glazing is applied to both opening types.
  • Handles — profile, finish and projection affect circulation in a narrow bedroom aisle.

7. Supplier scope: what one quotation should cover

A wardrobe rarely arrives as an isolated box, and made-to-measure work only pays off when the manufacturer can also keep finishes consistent across rooms. If the same fit-out includes vanity joinery, Custom Built-in Kitchen Cabinets, media walls or Full Height Storage Walls, ask for one quotation covering the whole joinery package. Matched board, edge and finish across rooms is far easier to obtain from a single manufacturer than to reconcile between two.

Read the scope line by line and confirm which of these are included: site measurement or your own survey drawings, shop drawings for approval before production, manufacture and finishing, packing method, freight to site and who unloads, installation labour, snag rectification and spare panels. A low price usually means one of those lines has been moved to your side of the contract.

Where the joinery is part of a wider fit-out, One-stop Solution covers design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover. Wardrobe specifications are confirmed per project, so dimensions and selected finishes should be checked against your own approved drawings rather than assumed from a catalogue page — including made-to-measure sizing, material and finish options, and layout tailored to the space.

8. Logistics, site readiness and installation

Project orders are usually placed through a custom furniture manufacturer that also handles freight, which changes what you have to coordinate yourself. For an overseas order, the schedule is set by the slowest dependency, so plan backwards from handover. Confirm the production period, then the shipping method and who handles customs clearance under Logistics & Door-to-Door Delivery, then the delivery window your site can actually receive a container and store crates without damage.

  • Site readiness dates — plaster, paint, flooring and skirting must be complete before built-in joinery is fitted; agree these with your builder before the order is placed.
  • Storage on site — crates need a dry, secure area and a clear route to the bedroom.
  • Services coordination — lighting drivers, sensors and any mirrored or lit display need first-fix cables in the right place before plasterboard closes.
  • Installation and handover — confirm who fits the units and how snags are recorded. Installation & After-sales Support covers on-site installation, inspection and snagging, spare parts and maintenance; warranty terms and response times should be confirmed in writing for your specific order.

9. Where the wardrobe sits in a whole-bedroom fit-out

A glazed open run is easier to get right when it is specified alongside the finishes around it. Flooring sets the plinth height and the tone behind the glass — engineered options such as European Oak Engineered Wood Flooring are usually ordered at the same time as joinery so the two meet cleanly. Wall finishes and any display niches or partitions should be drawn before the wardrobe carcass is dimensioned, since Niche Shelving and panelling are built to the same walls the unit is scribed against.

Where a bedroom opens into a dressing area, decide early whether the division is a wall, a screen or glazing. Glass Partitions keep light moving through to the wardrobe while still separating the spaces, and they need the same kind of fixing detail and floor build-up decision as the joinery itself.

10. Documentation to receive at handover

  • Approved shop drawings with the final dimensions, layout and finish references.
  • Finish schedule naming every panel type, colour reference and edge detail actually supplied.
  • Hardware list with model references, so replacement parts can be ordered later.
  • Spares plan — spare shelves, shelf pins, hinges and at least one glass panel of each type specified.
  • Care instructions for the glazing and surface finishes, especially for high-gloss and lacquered panels.

Before you sign: five questions worth asking

  • Which exact opening configuration is quoted — open bays, glazed compartments, or a glazed walk-in?
  • Have I supplied measured dimensions at three points, with floor finish thickness included?
  • Is every surface specified by substrate, colour reference and edge treatment, including carcass interiors?
  • What glass type, thickness and edge finish is quoted, and how are panels protected and replaced?
  • Does the price include measurement approval, freight, unloading, installation and snagging — or which of those do I carry?

Work through the checklist in order and the specification closes cleanly: configuration first, then survey data, layout, materials and glass, hardware, supplier scope, logistics, fit-out coordination and handover paperwork. That sequence is what keeps glass open wardrobes from being an attractive drawing that does not fit the room they were designed for.

Send your drawings, dimensions and finish preferences to SANTERSON for a project-specific quotation: email santerson@qq.com or contact PHILLIP on +86-13928214007. Enquiries are answered through the contact page.