A design brief that mentions “light wood kitchen, warm but not yellow” is where most veneer cabinet projects start — and where most of them stall. The phrase means something different to an architect, a joiner and a factory. Turning it into a firm quotation on Light Tone Veneer Cabinets takes five specific inputs, and once they are written down the enquiry can move from idea to production without three rounds of clarification.
SANTERSON is a China-based furniture and building materials manufacturer working on residential and hospitality projects worldwide. Our Custom & OEM Service covers bespoke cabinetry, so the brief below is the same information we ask for when a cabinet package is made to measure.
1. Fix the tone before you fix the species
“Light” is a brightness range, not a colour. Two samples that both read as pale can sit at opposite ends of the warmth scale, and once veneer is installed across an entire galley kitchen a warm cast becomes very hard to live with. Give the factory two reference images: one surface you would happily specify, and one you would reject.
- Brightness: how the doors read in the room's actual daylight direction, not under showroom lighting.
- Undertone: cool grey-beige, neutral, or warm honey — state which you want and which you are trying to avoid.
- Sheen: matte, satin or gloss. Our Wood Veneer Kitchen Cabinets range is shown in light tone, dark tone, natural, matte wood veneer, high gloss wood veneer and two tone versions, so the finish family is usually already there; the decision is sheen and tone.
- Grain scale: tight, straight grain or an open figure. Wide grain reads as furniture; fine grain reads as joinery.
Send the same references for any other timber in the scheme — flooring, doors, wall panelling — so the cabinet tone is matched against the room rather than chosen in isolation.
2. Send drawings with dimensions you expect to be checked
A rendered mood board cannot be quoted. What can be quoted is a set of elevations with overall runs, heights and depths, plus the plan showing appliance positions. Light Tone Veneer Cabinets are made-to-measure, so the drawing is what sets price.
- Kitchen elevations, both walls, with total run lengths and ceiling height.
- Appliance schedule: oven, hob, extractor, dishwasher, fridge, any wine cabinet — model numbers where they exist.
- Worktop material and thickness, because the carcass and the scribe detail change with it.
- Island or breakfast bar dimensions, including overhang for seating.
- Floor finish build-up at the perimeter, so door heights are set above the finished floor.
Where a dimension is still provisional, mark it as provisional. We would rather confirm it before production than discover it during installation.
3. Specify the layout logic, not just the appearance
Veneer governs how the doors look; internal fittings govern how the kitchen works. Tell us which zones carry the load: tall larder bank, drawer stack next to the hob, corner storage, a concealed pantry behind matching veneer panels. Every item on that list changes both the carcass count and the quotation.
If appliances are being integrated, say so at this stage rather than after the layout is drawn, since an integrated door has to be cut and finished to match the surrounding fronts. Handleless grooved edges, profile pulls and visible hardware each need a different door construction, so pick one per project.
4. Name the delivery point and the receiving arrangement
Cabinetry is unforgiving of a vague ship-to address: panels arrive on pallets sized to the drawing set, and a site that cannot receive them becomes a storage problem. Our Logistics & Door-to-Door Delivery service covers freight forwarding by sea, air and rail, with packaging and container loading arranged around the drawing set.
| Tell us | Why it changes the quote |
| Port or delivery address, and who signs for the goods | Determines route, freight mode and packaging spec |
| Site access: floor level, lift size, parking restrictions | Sets panel lengths and pallet breakdown |
| Required arrival date for the joinery trade | Fixes production sequence and shipping choice |
| Who handles import clearance on your side | Defines which paperwork we prepare and who files it |
Import terms, duties and transit arrangements are settled per project, so treat the figures in a quotation as specific to that shipment rather than a standing rate.
5. Say who signs off the sample
The step most enquiries skip is approval of a physical door sample — veneer, edge, sheen and hardware together, not a catalogue photograph. Once that sample is signed, production follows against it, and any later change to tone or sheen becomes a variation.
- Name one decision-maker for the sign-off; comments from four people produce a delay, not a better kitchen.
- Judge the sample against your own worktop and flooring samples, in the room where the kitchen will sit.
- Confirm the approval in writing before production starts.
A short enquiry checklist
- [ ]Two reference images: one approved tone, one rejected
- [ ]Sheen and grain scale stated in words
- [ ]Elevations with overall runs, heights and depths
- [ ]Appliance schedule with model numbers
- [ ]Worktop material and thickness
- [ ]Internal zoning list for tall units, drawers and corners
- [ ]Delivery address, site access notes and required arrival date
- [ ]Named approver for the door sample
Projects that reach the factory with tone, drawings, layout logic, delivery terms and a named approver move through quotation faster than ones that arrive with a photograph alone. Prepare those five items first, and the rest of the process is confirmation rather than negotiation.