Wood veneer wall panels look simple on a mood board: a warm timber surface, clean joints, a quiet background for the rest of the room. They are one of the least forgiving products in a fit-out to order, because almost every problem shows up later as an edge that does not line up, a grain direction nobody agreed, or a batch that does not match the sample on the wall. A supplier who receives a clear brief can price it correctly and warn you early. A supplier who receives "40 square metres of oak" will quote something, and the difference between those two quotes is usually paid for on site.
Before you send an enquiry about wood veneer panels, here is what to have ready, and why each item changes the answer you get back.
1. The wall, not the room
Panelling is measured per wall, and a floor plan is not enough. For every run, send the finished width and height, the ceiling or cornice condition at the top edge, the skirting or base detail at the bottom, and everything that interrupts the surface: switches, sockets, thermostats, TV brackets, door openings, reveals, radiators and service boxes. Note whether the substrate is flat and where it is not.
Send dimensions as finished sizes in one unit throughout, and say which faces are visible. A panel that abuts a window reveal needs a different edge treatment from one that butts into a doorway, and an installer who has to trim a veneered face on site will leave a raw edge that no field touch-up really hides.
2. Species, cut and grain direction — agreed in writing
"Oak" is not a specification. Two oak panels from the same tree can look completely different depending on how the log was sliced and how the sheets were laid up. Before you enquire, decide:
- Species and figure. Plain-sawn, quartered, rift-sawn, burr, or a reconstituted veneer with a repeat pattern. Each behaves differently across a large wall.
- Cut and matching. Whether the panels are to be book-matched, slip-matched or laid up as a random-match field, and which direction the grain runs — vertical, horizontal or mixed.
- Colour and sheen. Bleached, smoked, stained, natural, matte lacquer or open-pore. Bring a physical reference if you have one; screen colour is not a specification.
- Tolerance on variation. Veneer varies between leaves. State whether the look you want is uniform or lively, and ask to see a full-size sample of the actual leaf, not a printed brochure page.
This is also where related products help. If your project uses veneered cabinetry elsewhere, mention it in the enquiry — matte wood veneer cabinets and veneered wardrobes need to sit under the same species and sheen as the wall, or the joinery will read as a different material.
3. Substrate, thickness and how the panels will be fixed
Decide before you ask, because it drives the price and the wall build-up:
- The core: MDF, plywood or another stable board, and its thickness.
- Whether the veneer is applied to both faces (needed where the back will be visible, or to balance moisture and prevent cupping) or one.
- Fixing method: adhesive to a prepared flat substrate, mechanical fixings to battens, or a proprietary clip system on a counter-batten framework.
- Total built-out depth. A panelling build-up typically takes up 20–40 mm of room depth per wall; on a bathroom or corridor scheme that is a decision the design team should make, not the supplier at delivery.
Also state where the panels are going. Residential bedroom and living-room walls differ from hospitality lobbies and guest rooms, where impact, cleaning regime and joint detailing all push the specification in a tougher direction.
4. Panel layout, module sizes and expansion joints
Send a layout drawing, even a marked-up elevation. It should show the module width and height of each panel, where the joints fall relative to doors and furniture, whether joints are open (shadow gap) or tight, and how inside and outside corners are detailed. Confirm who is doing the corner detail: mitred veneer on site is skilled work, and a pre-finished returned edge shipped to site is usually cleaner.
Long runs need an expansion strategy. Timber-based panels move with seasonal humidity, especially in heated or air-conditioned interiors, and a continuous field of tight joints across a long wall will telegraph that movement. Ask the supplier where they want a moveable joint and how they intend to detail it.
5. Quantities, phasing and batch control
Give square metres per wall rather than one total for the building, and separate what you need now from what comes later. Veneer leaves are matched within a batch; a top-up order six months later is a different leaf, and it will not blend invisibly into an installed wall.
If the project is phased across villas, guest rooms or floors, say so in the first email and ask whether the specified veneer will still be available for the second phase. A supplier can hold a batch or flag a species that is likely to change.
6. What the enquiry should ask for, not just a price
A good RFQ for panelling asks the supplier to return more than a number:
- A full-size sample of the specified veneer on the specified substrate, with the actual edge treatment.
- Their shop drawings from your dimensions, showing joint positions and corner details, for your sign-off before production.
- A written confirmation of species, cut, matching rule, sheen and substrate build-up.
- Packaging and pallet schedule, panel weights, and whether the panels ship loose or as a pre-assembled system.
- Their scope boundary: what they supply versus what the site contractor forms, trims and seals.
7. Logistics and site conditions for imported panels
If the panels are coming from overseas, add the delivery facts to the enquiry, because they change packing and cost:
| Item | Why it matters before quoting |
|---|---|
| Delivery term and destination | Door-to-door service covers freight, customs paperwork and container loading; the term you choose decides who handles clearance at the port. |
| Site access and storage | Oversized panels need a lift, a stairwell or a ground-floor route. Veneered panels must stay flat and dry on site, not leaning against a wall in an unsealed building. |
| Sequence of arrival | Panelling should arrive after wet trades and screed have dried out, and before the joinery and finishes that it abuts. Confirm the delivery window against your programme. |
| Inspection on receipt | Check leaf match, edge condition and panel count the day the crates open. Damage claims after the panels are in the wall are almost impossible to establish. |
| Acclimatisation | Let panels sit in the conditioned room before fixing, so they move before they are locked into a joint. |
8. Where veneer is the wrong answer
Be honest about the environment in the enquiry, and let the supplier push back. Veneered panels are a poor fit where they will be wet or steam-washed — shower enclosures, splash zones with no protection, plant rooms. In those locations ask about alternatives in the same range: matte lacquer panels, stone and marble panels or textured panels hold up better where moisture and cleaning are the real drivers, and acoustic panels do a job that solid veneer cannot.
If your wall is really part of a larger built-in composition — panelling merged with doors, niches and storage — say that too. Integrated door and paneling and custom niche paneling are specified as one system, and splitting them between two trades is how flush doors end up sitting proud of the wall they were meant to disappear into.
A quick pre-enquiry checklist
- Measured elevations per wall, in one unit, with all interruptions and services marked.
- Species, cut, matching rule, grain direction, sheen — written down, not implied by a photograph.
- Substrate, panel thickness, single or double veneered face, total built-out depth.
- Fixing method and who does the corner and edge detailing.
- Layout drawing with module sizes, joint type and expansion joints.
- Square metres per wall, phasing, and a question about future batch availability.
- Delivery term, site access, storage conditions and arrival window.
- A request for a full-size sample and shop drawings before production starts.
Bring those eight items to the first email and you will get an accurate price, a drawing to check, and a warning about anything that does not work — all of which are cheaper than the same conversation after the panels are on the wall. Send your drawings and sample references through the contact page and specify what you need back.