Parquet has come back into villas, hotel guest rooms and apartment living rooms, and European oak parquet engineered hardwood flooring is usually the product specified when a project wants that pattern without the movement risk of a solid board. The look is settled by the sample. What buyers often miss is how much of that look, and how much of the floor's behaviour on site, is decided by finish details that never appear in the pattern name.

Before an order is placed, ask for a written confirmation of six things: the top-layer thickness, the surface treatment, the sheen level, the colour and grain grading, the edge profile, and the protective coat. Each one changes what the delivered boards look like once they are laid across a whole room.

Why finish details matter more on parquet than on plank flooring

A plank floor gives the eye a long, uninterrupted line, so small differences between boards average out. Parquet works the other way. Small pieces repeat in a tight geometry — herringbone, chevron, basket weave — and every variation in tone, grain or surface texture is multiplied across the field. A batch that looks acceptable as single samples can read as patchy once 200 m² of it is laid in a lit lobby.

That is why buyers who order parquet from photographs alone often get a floor they did not approve. The pattern is only half the specification; the finish is the other half, and it has to be written down.

The six details to confirm in writing

1. Top-layer thickness

In the European oak engineered flooring we produce, the wear layer is 3 mm of solid oak over a multilayer base. That thickness is what allows the grain to be brushed or embossed and still leave real wood above the treatment; it also determines whether the floor can take a light sanding later in its service life. Ask for the top-layer figure on the quotation, not just "engineered oak", and check that the same figure applies to every format in the order.

2. Surface treatment: smooth, brushed or hand-textured

Two floors can carry the same colour and look completely different under directional light. A smooth surface reflects evenly and reads clean; a brushed surface removes the softer early wood and leaves grain relief that catches light and hides footprints and fine scratches. In our product descriptions we state the treatment where it applies — for example smoked antique craftsmanship on several European oak boards — because texture is part of what the buyer sees, not a footnote.

3. Sheen level

Sheen is the detail most often settled by assumption. The same oak in matte, satin and high-gloss gives three different floors: gloss amplifies grain relief and every imperfection in the subfloor; matte absorbs light and keeps a parquet field visually quiet. For hospitality lobbies and villas with large glazed elevations, we recommend specifying the sheen number agreed on the approved sample, and confirming it applies to both the standard boards and any border or feature area.

4. Colour and grain grading

European oak is a natural material with knots, mineral streaks and tone spread. Our catalogue separates these on purpose: a light European oak board that retains natural knots and subtle grain reads rustic, while a charcoal or dark brown board with bold grain and subtle knots reads formal. Buyers should ask which grading the order follows — clear and selected, or character and rustic — and how many grades may be mixed in one container. A mixed-grade delivery is not a defect; an unagreed mix is a dispute.

5. Edge profile and joint type

Micro-bevel, square edge and eased edge each change the finished surface. Square edges give a near-continuous plane but show any lippage; micro-bevel hides small height differences between boards. For parquet laid over underfloor heating, the joint also has to suit the movement the base allows. Confirm the profile on the drawing and confirm it matches the sample you approved.

6. Protective coat and its application

Ask what protects the surface — factory-applied lacquer, oil or hard-wax finish — how many coats, and whether boards supplied for a project arrive pre-finished or are finished on site after laying. Factory finishing is more consistent; site finishing lets colour be adjusted to the room but adds dust, drying time and variability. Whatever is chosen, it belongs in the order documentation together with the recommended maintenance product.

What our parquet specification sheet states

ItemWhat we state on the product record
Wear layer3 mm solid European oak top layer over a multilayer engineered base
StructureMultilayer base for dimensional stability, to reduce the risk of deformation and warping
SurfaceNatural grain; wear-resistant surface on formats intended for daily use
HeatingCompatible with underfloor heating on the formats where this is stated
Tones in rangeLight and bleached, warm natural, honey smoked, deep brown, dark brown and charcoal
PatternsParquet blocks and herringbone formats

Board dimensions, total thickness, adhesive and screed requirements, and the heating regime are confirmed project by project on drawings and technical sheets. We do not publish one universal figure across the flooring range, because parquet blocks and herringbone planks are built to different formats.

Matching the finish to the room

In a residential living room or bedroom, a light tone with subtle grain keeps the pattern legible without darkening the space — our European Oak Parquet Engineered Hardwood Flooring in a bright, clean tone is specified for exactly that kind of modern home interior. Where the brief asks for warmth and depth, a deep brown parquet carries the pattern more formally; see European Oak Parquet Engineered Wood Flooring in rich brown grain.

Herringbone is the other end of the same conversation. A bleached herringbone opens up a room, while a dark tone turns it into the dominant surface — European Oak Herringbone Engineered Wood Flooring covers both directions in our range. For larger layouts such as guest-room corridors and reception areas, the same finish logic applies at a bigger scale: the darker and glossier the board, the more each installation joint shows.

Rule of thumb we give project buyers: the busier the traffic and the stronger the daylight, the more conservative the sheen and the more controlled the grading should be.

How to run sample approval so it actually protects the order

  • Approve a full-size board, not a thumbnail swatch, and view it in the room's own light at two times of day.
  • Lay three or four boards side by side to see tone spread within one batch before signing off.
  • Photograph and sign the approved sample, and keep it on site as the reference for goods-in inspection.
  • Write the top-layer thickness, surface treatment, sheen, grading, edge profile and protective coat onto that signed sheet.
  • Confirm the finishing route — factory or on-site — before production starts, not at handover.

Ordering parquet as part of a wider fit-out

Flooring rarely arrives alone. On villa and hospitality projects we supply flooring alongside custom built-in kitchen cabinets, vanities, wall panelling, doors and lighting, which means the floor finish has to be agreed against joinery tones and wall panels rather than in isolation. Our workflow runs from design consultation and material selection through production, quality control, logistics and door-to-door delivery, so the flooring specification travels with the rest of the package instead of being re-specified by a separate supplier.

If your project is comparing parquet formats, send the floor plan and the lighting layout with your enquiry. We will confirm which tone, texture and edge profile hold up at the scale of your actual rooms, and put every finish detail on the quotation before production begins.

Specify the finish before the order

Talk to our project team about European oak parquet and herringbone engineered flooring for villas, hotels and apartments — contact SANTERSON.