A swim spa specification sheet rarely causes problems at quotation stage. It causes problems at handover, when the shell arrives on site and nobody has recorded who was responsible for the electrical supply, the lifting plan or the water treatment commissioning. If you are sourcing an outdoor swim spa for a villa, resort or private-estate project, the documentation you build around the product is what protects your programme and your budget.

In short: for WS-S07M, procurement teams should document six things in writing before order confirmation — the exact configuration and option list, the electrical load and who supplies it, site access and lifting responsibilities, water-treatment duties, delivery terms with named Incoterms, and an acceptance checklist tied to the agreed specification.

Why documentation matters more on a swim spa than on furniture

A swimming pool or swim spa is not a loose item you can place and walk away from. It combines a large fabricated shell with pumps, filtration, lighting and a control system, and it needs permanent connections to power, water and drainage. Every one of those interfaces is a handover point between the supplier, the main contractor and the client's trades.

On furniture projects we coordinate through turnkey interior project solutions, where the scope boundaries are usually obvious. A swim spa is different: if the specification file does not say who provides the dedicated circuit, who pours the slab and who commissions the filtration, that question gets answered in the most expensive way possible — on site, late.

Start from the catalog data, then confirm the configuration

The published catalog entry for WS-S07M lists the following. Treat it as a starting point for your specification file, not as a purchase order:

ItemCatalog value shown on site
ModelWS-S07M
Catalog dimensions7000 × 2200 × 1480 mm
Control system1 set
Water pump3 pcs
Filter pump1 pc
Jet total40 pcs
LED lights2
Total power10.75 kW
Features shownWater jets, LED lighting, Ozone, Waterfall, 4 water columns
Read this before you copy the table into a tender document. These figures are transcribed from the catalog page. Swim spa options change pump counts and connected load, so the number that goes on your electrical drawing is the one for the configuration you actually order — confirmed in writing by the factory, with a signed equipment schedule attached. Do not let an electrician terminate a circuit off a web page.

One line in the catalog data deserves particular attention: no swim training system is listed for this model. If your client's brief mentions lap swimming or a current-generating unit, that gap must be resolved before quotation — either by confirming an added swim-current option, or by restating the deliverable as a hydrotherapy and leisure spa so expectations match what is being bought.

The six documents to complete before order confirmation

  • 1. Configuration sheet with an option list. Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Record each one as included or excluded, per line item, with the model reference. "As standard" is not a specification.
  • 2. Electrical schedule. Record the confirmed connected load for the ordered configuration, supply voltage and phase, circuit protection, earthing and bonding requirements, and — critically — which party supplies and installs the dedicated supply up to the spa's connection point. This is the single most common omission in swim spa procurement.
  • 3. Site and access plan. A 7 m shell needs a delivery route, a crane or forklift plan, a prepared base, and clear dimensions for gates and turning radii. Document the base specification and who prepares it, plus drainage and any plant-room location for filtration and heat pump equipment.
  • 4. Water-treatment and commissioning record. Note which treatment is included — ozone appears in the catalog features, UV sterilization as an option — and separate commissioning from routine maintenance. Name the party responsible for first fill, balancing, handover training and ongoing chemical servicing.
  • 5. Delivery terms and packing documentation. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, packaging and container loading, customs paperwork and shipment tracking. Document the named Incoterms, the insured value, the delivery address, and who handles import clearance and last-mile site delivery.
  • 6. Acceptance checklist. Attach the agreed equipment schedule to a snag list: shell finish, jet count and function, lighting, waterfall and water columns, control operation, filtration run test, and any spares handed over. Sign it at handover, not after defects appear.

Where the risk actually sits in a swim spa purchase

From the buyer's side, four issues account for most of the rework on this product category:

  • Assumed scope at the electrical interface. The supplier delivers to a connection point; someone still has to run the circuit. Write it down.
  • Option drift between quotation and shipment. A heat pump or sand filter quoted verbally and never written into the schedule arrives as an extra, or not at all.
  • No commissioning owner. The spa is installed but nobody has been briefed on filtration cycles, winterisation or warranty conditions tied to water chemistry.
  • Late site access problems. A shell that cannot reach the prepared base turns into a crane day and a programme slip.

None of these are technical failures. They are documentation failures, and all six documents above cost nothing to produce before the order is placed.

How a single supplier simplifies the paper trail

Most villa and hospitality projects do not buy a swim spa in isolation. The pool deck, outdoor furniture, pergolas and loungers, bathroom fixtures, lighting and finishes all arrive from different vendors with different documentation habits. Working as a one-stop furniture and building materials supplier, we consolidate that scope — production, quality control, project management and site coordination under one file.

Where a project needs the spa to match other elements — a custom shape, a specific finish, or equipment tailored to the client's usage pattern — our custom and OEM service covers bespoke design, prototyping and material selection, with drawings confirmed before production starts. That means the configuration sheet is a drawing set you approve, not a description you hope matches.

After delivery, installation and after-sales support covers on-site installation, inspection and snags, warranty coverage and spare parts. Agree the scope of that support in writing at contract stage, including what is handled remotely and what requires a site visit.

Documentation checklist for your next swim spa enquiry

  • Signed configuration sheet listing every option as included or excluded
  • Confirmed connected load, supply requirements and named responsibility for the electrical interface
  • Base specification, drainage plan and site access / lifting plan
  • Water-treatment scope plus a named commissioning and maintenance owner
  • Named Incoterms, insured value and customs-clearance responsibility
  • Acceptance checklist attached to the agreed equipment schedule, signed at handover
  • Contact details for after-sales escalation, with spares references recorded

If you would like the configuration sheet and electrical schedule prepared for a specific project, send us the site drawings and the client's brief. We will confirm the equipment list, the connected load for that configuration and the delivery scope before you commit to an order.

Questions procurement teams ask about WS-S07M

Is the 10.75 kW figure the one to size the supply from?

It is the catalog figure for the published configuration. Size from the confirmed load of the ordered build, because options such as a heat pump change it. Ask for the signed equipment schedule before your electrical designer signs off.

Does WS-S07M include a swim current?

No swim training system is listed in the captured catalog specifications for this model. If lap swimming is part of the brief, confirm whether an option applies or specify the deliverable as a hydrotherapy and leisure spa instead.

Can the shape or finish be customized?

Customizable shape outdoor spas are available in square, round, oval and curved designs to suit the available space. Availability of specific changes on a given model is confirmed case by case during design review.

Who handles import and site delivery?

Freight by sea, air or rail, packaging, container loading, customs paperwork and door-to-door delivery can be arranged. Import duties, local permits and the last-mile route are project-specific and should be recorded in the delivery terms before shipment.