Grey is the finish buyers reach for when they want a kitchen that stays quiet and neutral for years: it hides fingerprints better than a high-gloss panel, sits comfortably beside stone worktops and timber accents, and does not fight with the colour of the appliances. The problem is that "grey matte cabinets" means something different from one factory to the next. One supplier quotes a handleless grey door on a moisture-resistant board; another quotes a grey film over a plain particleboard box with soft-close hinges as an upsell.

That gap is where budget and schedule problems start. Before you send an enquiry, put together the information below. A supplier working from Grey Matte Cabinets specifications cannot answer questions about your site on their own — but with your drawings and finish decisions in hand, they can quote accurately, flag conflicts early and start the sample stage without three rounds of email.

1. Drawings and dimensions you can actually build from

Cabinets are made to measure, so a photograph of the room is not a specification. Send what your designer or site team already has: reflected ceiling plans, electrical and plumbing positions, worktop heights, and a dimensioned elevation for every wall the run touches. Note floor level differences, skirting, pipework, radiators and any door swing that crosses a run.

Mark three things specifically on those drawings: appliance models and their cut-out sizes (oven, hob, extractor, dishwasher, integrated fridge), the worktop thickness you intend to install, and the ceiling height at the tallest point. Tall units are where grey matte runs most often go wrong — a pantry unit that clashes with a bulkhead is a production change, not a site adjustment.

2. The finish decision, stated precisely

"Matte grey" covers several different surface systems, and they behave differently in daily use. Decide before you ask for a price:

  • Sheen level. A flat, chalk-like surface and a low-sheen satin both read as matte in a photograph but clean very differently.
  • Colour reference. Send a RAL or Pantone code, or a physical sample you want matched. A supplier matching a screen screenshot will produce a different grey.
  • Direction and texture. Some matte surfaces are uniform; others carry a grain or a metallic flake that changes colour as light moves across the door.
  • Consistency across materials. If tall panels, doors and drawer fronts come from different board lines, check they will match once installed.

Grey is also where handleless detailing shows up most clearly. If you want a shadow-gap or integrated-profile look rather than visible knobs, say so at the enquiry stage — Handleless Matte Cabinets are built with different edge details and door clearances, and changing that after production starts is expensive.

3. Layout, internal fit-out and how the kitchen will be used

Send your preferred layout — straight run, L-shape, U-shape, or with an island — together with a note on who cooks in it and how often. That determines the internal specification far more than the door colour does: tall larder units with drawer stacks behave differently from a bank of base cupboards, and corner access needs a decision between carousel, pull-out or open shelving.

List what has to be stored, including the awkward items: tray sets, standing mixers, a wine fridge, baking sheets, pet bowls. Specify the hardware you expect — soft-close on which doors and drawers, drawer runner rating, integrated bins, internal lighting in glass-front units. A quotation that does not name the hinge and runner brand is not comparable with one that does.

4. Scope: cabinets only, or the fit-out around them

Decide what you are actually buying. A cabinet enquiry can stop at doors, carcases and worktops, or it can extend to wardrobes, vanity units, media walls, doors and panelling made to the same grey. Extending scope is usually cheaper than sourcing each element from a separate vendor, because one factory controls the colour match and one shipment carries everything — which matters most when matching grey cabinets to custom minimalist kitchen cabinets elsewhere in the property.

For a villa, apartment block or hospitality scheme, say how many identical units are involved and whether the design repeats across floors or room types. Repeat quantities change both the price basis and the sampling approach, and they let a supplier plan production runs rather than one-off batches.

5. Delivery, site conditions and responsibilities

Give the delivery address, the floor, lift dimensions or stair access, and the date the kitchen must be on site. Cabinet deliveries fail at the last hundred metres far more often than in transit: a tall unit that does not fit a service lift has to be re-divided into smaller units, which is a design change made under time pressure.

State who handles freight and customs, who receives the goods, and who installs. If you want door-to-door delivery and site coordination handled by the supplier rather than your own agent, say so in the first message — furniture logistics and door-to-door delivery arrangements affect packaging, container loading and the sequence in which units arrive, all of which are set before production, not after.

6. Budget range, programme dates and decision-makers

A budget band is more useful than a target number, because it lets the supplier propose two or three realistic specifications instead of guessing at one. Alongside it, give the date drawings must be signed off, the date cabinets must leave the factory, and the date the site needs them. Working backwards from installation usually exposes which finish options have no room in the programme.

Name the person who signs off the final drawings and the colour sample. Cabinets are cut only after that sign-off; a second approver appearing late in the process is one of the most common causes of delay.

7. Samples, and what to check on them

Before confirming an order, ask for a door sample in the exact finish you are buying, plus an offcut showing the board edge. Check the sample under the lighting you will actually install — grey matte panels shift noticeably under warm 2700K lamps versus cooler task lighting — and test it with a damp cloth and with something you would realistically wipe the doors with.

Ask what the sample proves: colour match, sheen level, edge wrapping quality, and how the surface handles a fingernail press at the corner. A supplier who cannot send a small panel in your finish is a supplier you should not be specifying for a whole kitchen.

8. Questions to put to the supplier directly

  • Which board is used for carcases and doors, and what is specified for areas near the sink and dishwasher?
  • What happens if a panel is damaged in transit — replacement part, or replacement unit, and on what timescale?
  • Which hinge and runner brands are fitted as standard, and what do upgrades cost?
  • Who produces the shop drawings for approval, and how many revision rounds are included?
  • What is covered after installation, and who performs it locally — see the installation and after-sales support terms.

Get those answers in writing before the order. They are the difference between a quotation you can compare with two others and a quotation you have to take on trust.

A short pre-enquiry checklist

  • Dimensioned elevations, appliance cut-outs, worktop thickness, ceiling heights
  • Grey reference (RAL/Pantone or physical sample) and required sheen level
  • Handleless or handled — decided before quoting
  • Internal fit-out list and named hardware expectations
  • Scope: cabinets only, or matching joinery across the property
  • Delivery address, access constraints, required on-site date
  • Budget band, sign-off dates, named approver
  • Sample request in the exact specified finish

Bring those eight items to your first conversation and the enquiry moves straight from "how much for grey cabinets" to a defined specification with a comparable price and a real programme. That is the point at which a supplier can be evaluated on their drawings, finish quality and delivery record rather than on the lowest number in an email.

SANTERSON has manufactured furniture and building materials for residential and hospitality projects since 2008. Send your drawings, grey reference and programme dates to start a specification review with our custom/OEM production team.