A washdown one piece toilet looks identical across three supplier quotations, and then the samples arrive. One bowl flushes clean on the first push, another leaves residue. One sits square against the wall, another needs a packer and a lengthened waste connection. The difference is not visible in a catalogue photo — it is in the trap arrangement, the glaze, the flushing set and the paperwork that comes with the quotation.

This guide uses our washdown one piece toilet, model 1003A as the worked example, and shows what to put in front of suppliers before you request samples, what to test when the sample arrives, and how to read a proposal so that two quotations can actually be compared. It is written for contractors, procurement officers and developers buying ceramic WCs for villas, hotels and apartment bathrooms.

Start From the Specification, Not the Photo

Most weak comparisons start because buyers send a picture and ask “what is your equivalent?”. Send the requirements instead. For a modern ceramic one-piece WC in the 1003A class, the baseline we work to is:

  • Body: one-piece integrated tank and bowl, so there is no gap between the two where dirt and bacteria collect.
  • Material: vitreous ceramic with a dense glossy glaze, specified to resist staining, limescale and yellowing in daily use.
  • Flushing: washdown action, chosen for strong cleaning performance with efficient water use.
  • Drain options: P-trap wall drain at 180 mm rough-in and S-trap floor drain at 250 mm rough-in — both offered on the same bowl so one model can serve two plumbing layouts.
  • Compliance: CE certification stated for the range, with the certificate supplied as a document rather than an icon in the brochure.
  • Typical use: residential houses, villas, hotels and commercial restroom renovation.

Send that list to every supplier. If a quotation cannot answer each line, it is not comparable with the others yet — and you should not be sampling it.

What the Sample Should Prove on Your Bench

Ask for one complete sample unit, not a bowl alone. A partial sample hides the flushing set, the seat fixings and the weight that tells you something about the ceramic. Then run these checks and write the results down for each supplier:

  • Glaze. Run your hand over the whole interior of the bowl, including under the rim area and inside the trapway entrance. A consistent, glassy surface with no dry patches or pinholes is what keeps staining from taking hold. Mark any rough spot — that is where a bathroom starts looking old after two years of use.
  • Weight and body. Weigh the unit. A heavy, evenly cast body with a fully glazed underside points to proper vitreous china; a light unit with an unglazed or thinly coated underside is a cost reduction you will pay for later.
  • Flush test. Connect it to a temporary supply and flush with the same volume of water each time. Note whether the bowl clears in one action, whether the water level settles correctly afterwards, and whether anything is left behind. Test more than once — a single good flush proves nothing.
  • Trap and rough-in. Measure the actual outlet. If the sample is supplied as P-trap, confirm the wall rough-in it needs; if S-trap, confirm the floor outlet position. Compare both against your as-built or setting-out drawings before you approve the model for a whole floor.
  • Seat and cover. Check the seat closes without knocking the bowl, that the hinges sit square, and that the seat shape matches the rim. A mismatched seat is a common reason a good toilet looks cheap once installed.
  • Lid and access. Remove the top of the cistern and look at the flushing mechanism: brand marking, adjustability of fill level, and whether replacement parts are stocked rather than model-specific oddities.
  • Packaging. Note how the sample arrived. Corner protection, thick moulded inserts and separate packing of the seat matter when 200 sets land on a villa site without damage.

Reading the Proposal: The Line Items That Decide the Price

Two proposals for “one piece washdown toilet” can differ by a wide margin and still both be honest. Break them into the same rows before you compare:

Line item What to ask each supplier to state in writing
Model and finish Exact model code, shape family and glaze finish. Our equivalent is the 1003A one-piece washdown WC; a competitor may quote a visually similar bowl under a different code — record it so substitutions are visible.
Trap type and rough-in P-trap or S-trap, and the rough-in dimension. Confirm whether both options carry the same unit price or whether one costs more.
Inclusions Seat and cover, flushing set, floor fixings, connectors and stop valve. A lower unit price that excludes the seat is not a lower price.
Certification Which certificate covers this exact model, who issued it, and its validity period. Ask for the scan.
Packaging standard Packing method, carton specification and pieces per carton — this drives both breakage rate and container loading.
Quantity and price breaks Unit price at your project quantity, plus the next break. Ask what happens to the price if the order is split across two shipments.
Lead time Production time from confirmed deposit, and whether the model runs continuously or only in batches.
Freight and terms Incoterms, port of loading, and whether delivery to site is included. Compare door-to-door against FOB on the same basis.
Spare parts and after-sales Availability of flushing-set and seat spares for the model's life, and who replaces a damaged unit on arrival.
Sampling cost Whether the sample is charged, credited against the order, and who pays the courier.

Put every supplier's answers in one sheet. The cheapest unit price usually wins only after freight, inclusions and spares are normalised — that is where the real spread appears.

Matching the Toilet to the Bathroom It Is Going Into

A single model rarely suits a whole project. For villas and hotels we group the range by how the bowl connects and how much floor it leaves clear:

  • Guest bathrooms and powder rooms with a wall outlet — a one-piece washdown WC such as the 1003A or the square-rounded 1004A one piece toilet, both with P-trap and S-trap options, so one decision covers most layouts.
  • Small bathrooms where the floor should stay clear — a wall-hung bowl such as the rimless 1038W wall hung toilet, which uses a hidden tank and 180 mm P-trap wall drainage, making the floor underneath easy to mop.
  • Bulk guest-room or apartment packages — the two piece washdown toilet 1038A, which also offers 180 mm wall P-trap and 250 mm floor S-trap rough-in choices, with a smooth glazed surface for low-maintenance housekeeping.

Decide the trap type from the drawings first, then choose the model. Buyers who choose the model first end up paying plumbers to move waste pipes — a far larger cost than any difference in ceramic price.

Buying It as Part of a Larger Fit-Out

Ceramic WCs are one line among basins, showers, vanities, cabinetry, lighting and floor finishes. Coordinating them through one supplier reduces the number of deliveries to track and removes the argument over whose part caused a snag. As a furniture and building materials manufacturer, we produce the bathroom ceramics alongside the joinery, wall panels and lighting for the same villa and hotel rooms, and our custom & OEM service covers bespoke finishes, private labelling and flexible minimum order quantities where a project needs them.

Our stated process runs from design consultation and material selection through production, quality control, project coordination and handover, with logistics and door-to-door delivery arranged by sea, air or rail including customs paperwork. Terms, transit time and delivery scope are agreed per project rather than quoted as a blanket promise — the same discipline we ask you to apply when comparing proposals.

A Five-Day Comparison Schedule

A practical timeline that keeps three suppliers honest without delaying the programme:

  • Day 1–2: issue your specification sheet — trap type, rough-in, glaze, flushing type, certification, quantity — to all shortlisted suppliers.
  • Day 3: receive written quotations on the same line items. Reject any quotation that leaves a row blank.
  • Day 4–5: order one complete sample from each remaining supplier, with the cost and courier terms confirmed in writing.
  • On arrival: run the bench checks above, photograph the results, and score each unit against your own list rather than a sales sheet.
  • Before the order: ask for the production schedule, packing specification and spare-parts commitment in the same document you sign.
Two questions settle most close calls. First: does the supplier offer both P-trap and S-trap versions of this bowl, so a change on site does not force a new model? Second: which parts of this unit will still be available as spares in five years? A toilet that answers both is worth more than one with a marginally lower carton price.

If you are specifying washdown one piece toilets for a villa, hotel or apartment project and want the sample programme run against your own drawings, send us the trap layout and quantities — contact our team to arrange samples and a written quotation on the same basis as your other bids.