Open wardrobes suit walk-in robes, villa bedrooms and serviced-apartment projects where the storage wall is meant to read as joinery rather than as a block of doors. They also expose everything a buyer would rather hide: an uneven carcass edge, a shelf that sags under load, a finish that does not sit at the same tone as the vanities beside it. Before you send an enquiry for minimalist open wardrobes, it is worth knowing what actually differs between suppliers — and what a quotation should answer on your behalf.

1. Confirm the storage layout before you compare prices

Two units can share the same width and height and still behave completely differently in use. Hanging length, shelf depth, drawer positions, lighting provision and the treatment of the top section all change what a bedroom or dressing room can actually hold. In our Minimalist Open Wardrobes range, the layout is specified per project rather than fixed to a standard module, because a couple sharing one robe and a guest-room fitting-out need different internals.

Ask any supplier to state, in writing: overall height, width and depth for each run; hanging rail heights; shelf spacing; where drawers and pull-out baskets sit; and how the unit terminates at the ceiling and at adjacent walls. If that information is missing from two quotations, they are not comparable.

2. Check how far the sizing is really custom

A lot of catalogue copy says "customisable" while meaning a choice of three widths. Made-to-measure work looks different: carcass dimensions follow the site survey, out-of-plumb walls and uneven floor levels are taken up at installation, and the unit can be built around skirting, arches, beams or an existing window reveal. Each wardrobe we manufacture is built to project-specific dimensions, materials and finishes, with drawings confirmed before production starts.

A useful question for any factory: which dimension in your drawing is fixed by the survey, and which one do you expect to adjust on site? A supplier who cannot answer this is quoting a box, not a fitted piece.

3. Compare material and finish specifications line by line

With doors removed from the design, the visible surfaces carry the whole look. The board substrate, the surface material, the edge treatment and the hardware all need to be named on the same sheet, because an open wardrobe is judged at close range.

  • Substrate — what the carcass, shelves and back panel are made of, and how shelves are supported over their span.
  • Surface and edge — laminate, lacquer or veneer specification, plus how edges are finished where the shelf front is exposed.
  • Hardware — rail and bracket type, drawer runners, soft-close provision, and whether adjustable shelves are supplied as standard.
  • Integration — how lighting, mirrors or an adjacent vanity meet the wardrobe face, and who supplies the interface detail.

Where a project needs a specific look, request a physical finish sample rather than a photograph. Screen colour and sheen are the two things that most often read differently on site from how they looked in a file, and a sample in hand settles the question before production starts.

4. Match the open-wardrobe type to the room

Open wardrobes are not one product. The same collection is configured several ways, and each suits a different plan:

Choose the type from the room, then price it. Buyers who compare a freestanding unit against a wall-mounted run usually end up comparing two different installation scopes.

5. Judge the supplier's project workflow, not just the unit

Wardrobes are rarely an isolated purchase on a villa or hospitality fit-out. They sit alongside vanities, wall panelling, doors and lighting, and they have to arrive in the right sequence. Our work runs through a defined path: design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover — supported by OEM furniture manufacturing where a developer or brand wants its own specification produced.

For cross-border orders, also confirm freight method and delivery scope, who prepares customs documents, how the units are packed and loaded, and what happens if a component arrives damaged. We arrange global freight by sea, air and rail with door-to-door delivery, and installation and after-sales support sit inside the same contract rather than being arranged separately after the fact.

6. Read the fine print on samples, drawings and responsibilities

Three items decide whether a project goes smoothly: an approved production drawing with dimensions and finish codes signed off before manufacturing; a named responsibility split for site survey, packing, delivery point and installation; and a written route for spares and replacement parts. Ask for all three in the same email thread so the record is unambiguous.

SANTERSON has been manufacturing furniture and building materials since 2008 for villa, hospitality and office projects. Send us your floor plan, a photograph of the wall, and the finish you are working to, and we will come back with a layout proposal, a specification sheet and a quotation you can compare line by line against any other offer.