Wood grain melamine wardrobes look straightforward on a schedule: a timber-look finish, a run of doors, some internal fittings. They are one of the built-in furniture items that most often cause rework, however, precisely because teams assume the specification is finished once the sample has been approved. A wardrobe that reads beautifully in a showroom can arrive with the wrong grain direction, an unreconciled dimension, or an interior layout nobody signed off.

The documentation below is what we ask project teams to put in writing before wood grain melamine wardrobes enter production. It applies equally to a single villa bedroom wall and to a repeated guest-room type across several units.

1. The finish reference, not just the finish name

"Wood grain melamine" describes a category, not a product. Two panels carrying the same descriptive name can differ in tone, in the depth of the embossing, and in how the grain repeats across a door face. Record all four of these before an order is raised:

  • The supplier's own finish code and the physical sample reference used for approval, kept with the purchase order rather than only in email correspondence.
  • Sheen level — a matte, satin or higher-gloss surface changes how the grain reads under bedroom lighting and under corridor downlights.
  • Texture depth, since a shallow print and a deeply embossed panel of the same colour behave differently at edges and on rebates.
  • Grain orientation on each door leaf, and whether the grain runs vertically or horizontally across drawer fronts.

Where a project mixes finishes within one melamine range — for example pairing textured melamine wardrobes with a wood grain door, or using two tone melamine wardrobes to break up a tall run — document the pairing on a single finish schedule. Separate approvals for separate components are how mismatched tones end up on site.

2. How the grain repeats across the run

This is the item most frequently left undocumented, and it is the one that produces visible dissatisfaction. A wood grain decorative surface is printed in a repeat. On a single wardrobe the eye accepts it; across four doors and two flanking panels, an uncontrolled repeat can read as stripes.

Ask for, and record, the following:

  • Whether the supplier nests parts from a continuous print or cuts each panel independently.
  • Which elevation drawings show grain direction per part, signed off by the design lead.
  • Any requirement for book-matched or sequential matching on adjacent doors.
  • Tolerance for variation between panels of the same finish, agreed before production rather than at handover.
Practical note: request a full-size door or panel mock-up for the first wardrobe type on multi-unit projects. It settles grain-repeat and sheen questions on paper before the remaining units are released into production.

3. Dimensions, and who verified them

Melamine wardrobe carcasses are made to measure, so the dimension record matters more than it does for loose furniture. Document:

Item to documentWhy procurement needs it in writing
Width, height and depth per unit, taken from a site survey rather than architectural drawings aloneFloor-to-ceiling heights and wall straightness vary between units; drawing dimensions are not field dimensions.
Floor and ceiling finish build-up at the wardrobe footprintScreed, flooring and ceiling set-down change clear height after the wardrobe order is placed.
Obstructions: skirting, architraves, switches, extract ducts, sprinkler headsThese determine scribe allowances and whether a carcass needs a cut-out.
Door swing and clearance in front of the wardrobeHinged, sliding and pocket configurations each need their own clearance; a clash discovered on site is expensive to resolve.
Named party responsible for the survey, with dateRe-measurement requests are far cheaper when responsibility is fixed before production release.

4. Substrate, edge and hardware specification

The decorative face is only one layer of the specification. Record the board substrate behind the melamine surface, the edge treatment on every visible edge, and the hardware that carries the load. For a wardrobe this normally means:

  • Substrate type and thickness for doors, carcass, shelves and back panels — stated separately, because they are rarely all the same.
  • Edge banding colour and material on visible edges, with the same sample reference as the face finish.
  • Hinge brand or specification, soft-close requirement, and load rating for drawers and sliding systems.
  • Handle or handleless configuration, and how it is achieved at the door edge.
  • Fixing method to wall and floor, including whether the fixing detail suits the background construction on site.

Where a project also uses melamine in the kitchen, keep the wardrobe and wood grain melamine cabinets on one coordinated finish document. Matching timber-look surfaces across rooms is a specification decision, not something to resolve during installation.

5. Internal layout and its approval status

External appearance attracts attention; internal layout drives cost and user satisfaction. Fix in writing which configuration applies to each wardrobe type:

  • Hanging lengths and their heights, including a high rail for longer garments where required.
  • Shelf count, depth and spacing; adjustable versus fixed shelves.
  • Drawer quantity, drawer type, and whether an internal finish differs from the exterior.
  • Accessories: pulls, trays, lighting, mirrors, trouser slides — each listed as included or excluded.
  • Which drawings are the approved layout for production, with a version number and date.

For multi-unit schemes, define one standard type plus any permitted variants, rather than treating every wardrobe as unique. This is where documentation directly controls price: repeated types can be released in batches, while uncontrolled variation multiplies both engineering time and unit cost.

6. Packaging, delivery sequence and site conditions

Wardrobes are bulky, and their edges are the vulnerable part. Procurement documentation should state how the goods arrive and in what order:

  • Packaging standard for doors and panels, including edge protection and whether panels ship flat or assembled.
  • Delivery sequence by unit or floor, so wardrobes do not land in a property that is still wet-trade complete.
  • Storage conditions on site — melamine panels should stay dry and flat, away from plaster dust and standing moisture.
  • Inspection point on arrival: what is checked, who signs, and the reporting window for transit damage.
  • Spare-parts provision for high-traffic or repeated types, agreed at order stage.

For international schemes this sits alongside freight documentation. Our logistics and door-to-door delivery service covers packing lists, container loading and customs paperwork, but the receiving-side checks above still belong to the project team.

7. Installation and handover records

Close the file with what was actually installed. A wardrobe handover pack should contain the as-built elevation for each unit, the finish codes used, the hardware specification, adjustment and cleaning guidance, and a snag list signed off by both parties. This is also the record you rely on if a replacement panel or spare hinge is needed two years later.

Under installation and after-sales support, we ask clients to keep that handover document with the project file. Panel colour codes and hardware references are almost impossible to reconstruct once a building is occupied.

A short documentation checklist

StageDocument that must exist before the next stage starts
SpecificationFinish code, sheen, texture, sample reference, grain orientation rule
SurveyField dimensions per unit, obstructions, floor and ceiling build-up, responsible surveyor
Design freezeVersioned elevations, internal layout, substrate and edge schedule, hardware specification
Production releaseSigned approval of mock-up or first article, agreed panel-to-panel variation tolerance
DeliveryPackaging standard, delivery sequence, arrival inspection record
HandoverAs-built drawings, finish and hardware references, snag sign-off, care guidance

Questions procurement teams ask us

Can a wood grain melamine wardrobe match an existing timber-look panel on site?

Bring the physical sample, not a photograph. Tone, texture depth and sheen all need to be assessed together against a candidate finish, and we confirm in writing which reference we are working from before quoting.

Are these wardrobes made to a standard size?

No. Our wood grain melamine wardrobes are made to measure, with finish, layout and dimensions specified per space and per project. That is why the survey record, rather than a catalogue dimension, governs the order.

What happens if one wardrobe in a batch needs a replacement panel?

This is why finish codes and versioned drawings belong in the handover pack. With those references, a replacement can be produced to the same specification; without them, colour matching becomes a site argument.

Bringing it together

Wood grain melamine wardrobes reward documentation. The finish reference, the grain-repeat rule, the field dimensions, the substrate and hardware schedule, the approved internal layout, the delivery sequence and the handover record are the seven documents that decide whether the job runs smoothly or ends in a re-order. As part of our custom and OEM service, we work from those records and confirm every dimension and selected specification with the client before production begins — so the approval you sign is the wardrobe that arrives.

If you are specifying built-in furniture for a villa, apartment or hospitality scheme, send us your elevations and finish references and we will return a specification-aligned proposal through our contact team.