A mirror cabinet looks like a small line item until it is fixed to a wall above a vanity, wired into the bathroom circuit and shared by several rooms on the same floor plan. On residential and villa projects, the Santerson LED Mirror Cabinet is supplied as a configurable item — finish, layout and dimensions are set per project — which means the designer's intent and the buyer's order have to match on the same details before production starts. This article sets out what both sides should agree on when that line item moves from drawing to purchase.
Why a configurable cabinet is an alignment problem, not a catalogue choice
The mirror cabinets in this collection are made to the space rather than picked off a shelf. The same approach applies across the wider bathroom range, from vanity units to wall-hung ceramics: sizing is made to measure, materials and finishes are selected per project, and the layout follows the room. That flexibility is the point of specifying a custom item, but it also removes the safety net a standard product gives you. If the designer assumes a width that was never written down, or the buyer orders a finish nobody approved, nothing in the system catches it — the discrepancy only surfaces at site installation.
So the first thing to align on is not a specification sheet but ownership: who records the final dimension and finish decision, and which document becomes the one both sides sign. On multi-bathroom jobs this matters more than usual, because two bathrooms that look identical on a plan can still need different cabinets once basin position, door swing or tiling setout is taken into account.
The specification items designers and buyers should confirm together
| Item to align on | What the designer needs to fix | What the buyer needs to confirm before ordering |
|---|---|---|
| Overall size and clearances | Cabinet width and height against the finished wall face, plus clearance from the mirror edge to the basin, tapware and any adjacent door. | Whether the recorded dimensions are finished-face dimensions or structural ones, and whether they are repeated for every bathroom on the schedule. |
| Layout and storage mix | Interior layout — shelf heights, mirrored front type, open versus closed storage — based on how the room is used. | That the ordered layout matches the drawing revision, not an earlier option discussed in correspondence. |
| Finish and material | The finish selected from the available options, cross-checked against cabinetry, joinery and hardware elsewhere in the same bathroom. | The finish code or sample reference on the purchase order, with a physical sample signed off where finishes carry across trades. |
| Lighting and electrical | How the cabinet is lit and switched, and how that sits with vanity lighting or wall lights already shown on the lighting layout. | The electrical arrangement for each selected configuration, confirmed with the site electrician before the wall is closed up. |
| Relation to basin and vanity | Mirror height relative to the basin and vanity height, so sightlines work for the users of that room. | Whether basins, vanities and cabinets are ordered as one coordinated set with matching dimension references. |
| Scope across rooms | Where the same design repeats and where a room genuinely differs — guest bathroom, main ensuite, powder room. | A room-by-room schedule rather than one quantity with a single specification attached. |
Decide early whether the cabinet is the light source or works alongside it
On many bathroom designs the lighting layout assumes the mirror cabinet contributes to task lighting at the basin. That assumption has to be settled before the electrical drawings are issued, because it changes what the electrician runs and where the switch lands. If the design instead relies on separate wall or vanity lighting, the cabinet specification should be simplified accordingly. Either answer is workable; an unstated one is not.
Choose the cabinet type from the room, then keep the naming consistent
The collection covers more than one form. A standard wall cabinet suits a typical basin wall; where storage needs to run higher or the design wants a full-height mirrored element, tall mirror cabinets are configured for that purpose; round formats answer a different design brief again. A base model such as the standard mirror cabinet is the reference point when a project wants the simplest version of the detail.
The alignment risk here is naming. Designers tend to write "mirror cabinet" generically; buyers order against product names, and a generic label attached to three different formats invites the wrong one. The fix is small: every line on the schedule carries the specific product name and the room it belongs to.
How a one-stop supplier reduces the number of handovers
Bathroom fit-outs fail most often at the seams between suppliers — cabinet width versus mirror position, basin outlet versus wall finish, joinery tone versus paint. As a one-stop furniture and building materials supplier, SANTERSON supplies bathroom ceramics, vanities, lighting, cabinetry and other interior fixtures under one procurement route, and the service scope covers custom and OEM production through to door-to-door delivery, installation support and after-sales support. For a buyer, that means the dimension references and finish selections for an entire bathroom can be confirmed once and carried through production, rather than reconciled repeatedly between separate vendors.
This is where the coordination habit pays off. The same schedule that fixes the cabinet size also tells you which basin, which vanity and which lighting item it belongs to — so a change made once propagates instead of fragmenting.
A short pre-order checklist for both sides
- One signed dimension sheet per bathroom, stating finished-face measurements.
- Finish reference on the purchase order matching the approved sample or code.
- Lighting and switching arrangement agreed with the electrician before walls are closed.
- Basin, vanity and cabinet treated as one set with coordinated heights.
- Specific product names on every line, not a generic "mirror cabinet" entry.
- A named person responsible for confirming the final configuration before production begins.
If you are specifying bathroom fixtures for a villa or residential project and want the cabinet, vanity and ceramics confirmed as one coordinated set, send us the room schedule and we will work through the dimensions, finishes and lighting arrangement with your design team before production starts.