On a hotel or apartment build, the kitchen is usually the first fit-out element that gets re-drawn and the last one that gets value-engineered. A custom built-in kitchen cabinet package sits in the middle of that tension: it is an interior fixture, so it has to survive years of guest and resident use, but it also carries a large share of the visual impression in open-plan suites, serviced apartments and show units. The specification conversation is where most cost and rework are decided — long before any panel is cut.

This guide sets out the customisation decisions we ask project buyers, contractors and designers to settle at quotation stage, based on what our factory actually builds for hotel, apartment and residential renovation work.

Start With the Room Type, Not the Door Sample

Two identical apartments can need completely different cabinet packages. A serviced apartment kitchenette is used by a guest for a weekend; a hotel suite kitchenette may be used daily by housekeeping to restock; a villa kitchen is used for real cooking every day. Before we discuss finishes, we ask three questions that change the whole build:

  • Who uses it and how often? This drives panel thickness, edge treatment and how heavily the hardware is specified.
  • Is the kitchen open to the living space? Open-plan layouts need cabinet lines, colours and skirting that read as furniture, not as utility joinery. Our open concept kitchen cabinets line is built for exactly this condition.
  • Which appliances are being integrated? Ovens, refrigerators, coffee machines and dishwashers set fixed carcass widths. Send the appliance schedule with your drawings, not after the quotation.

The Six Customisation Layers to Agree in Writing

Every custom built-in kitchen cabinet order we produce is defined across six layers. Agreeing them one by one — and recording each decision on the drawing — is what keeps a bulk project order from turning into change orders.

1. Layout and dimensions

We build to your measured site dimensions, not to standard module sizes that get forced onto the plan. Base cabinets, wall cabinets and tall pantry units are laid out separately, so a 15 mm floor level difference in one bay does not propagate through the whole run. For L-shaped and U-shaped plans we set the working triangle — wash, prepare, cook — before deciding door swings, so no drawer is blocked by an appliance door.

2. Panel material and core

Tell us the environment and the traffic level, then let the factory pick the board. For high-humidity or high-turnover interiors we specify boards chosen for dimensional stability and moisture resistance rather than the cheapest board on the price sheet. If your project needs a particular substrate for local procurement or certification reasons, state it in the enquiry and we will confirm what we can produce with it.

3. Door style

Door profile is the fastest way to change perceived value without changing the carcass. The main families we manufacture for project work:

Door styleBest fitWhat to specify
Flat panel / minimalistModern apartments, hotel suites, show unitsPanel thickness, edge banding colour, handle or handleless
Handleless with touch-to-openHigh-traffic villas and apartments where protruding hardware snagsOpening mechanism per door type, drawer front vs. door
Shaker / paneledBoutique hotels, classic and transitional interiorsRecess depth, rail and stile width, paint or lacquer build-up
Glass front with internal lightingDisplay cabinets, wine cabinets, bar unitsGlass tint, LED colour temperature, wiring route and driver access

If the design intent is a seamless wall of cabinetry, the handleless minimalist kitchen cabinets specification removes protruding hardware and keeps the surfaces continuous. Pair it with soft-close fittings so the doors still behave well under daily use.

4. Surface finish and colour

We produce matte solid colours, high gloss, lacquer, melamine, acrylic and wood-grain veneer finishes, and we can match a colour standard you supply. Two practical notes that matter on site:

  • Gloss shows fingerprints and edge light lines. In guest-facing hotel kitchens we usually steer matte or textured finishes toward the working zone and keep gloss for display elevations.
  • Wood grain has a direction. Confirm on the drawing which way the grain runs on every elevation, otherwise identical doors will not look identical once installed side by side.

Two-tone schemes are among the most requested configurations — for example a two tone wood and white modern kitchen cabinet package, where warm veneer on the tall units is balanced against clean flat doors on the run. Specify which elevations carry which colour, and keep one finish consistent across all identical units so replacements match.

5. Hardware and internal fittings

Hardware is where cheap quotations hide. We supply matching cabinet hinges, drawer slide rails, support legs and connecting brackets with each package, and we recommend agreeing the hardware schedule before production:

  • Hinges: soft-close or standard, cup depth, and whether the door angle needs to clear an adjacent appliance.
  • Drawer slides: load rating, full extension, and soft-close on guest-facing units.
  • Internal organisation: pull-out corners, lazy susans, tall larder fittings, laundry hampers and integrated appliance tall cabinets — these change carcass dimensions, so they must be on the first drawing.
  • Service access: where the hinge driver, LED transformer and appliance connections will be reached for maintenance.

6. Interfaces with other trades

Cabinets fail at their edges. Confirm in writing who supplies and installs the worktop and backsplash — stone and marble surfaces can be matched to the cabinetry when they are ordered together — how the countertop meets the wall tile, where skirting is required for uneven floors, and how the cabinet run meets flooring, ceiling and interior fixtures installed by others. On multi-unit projects this single list prevents most on-site surprises.

A Quotation Checklist for Bulk Project Orders

Send us the following and you will get a comparable, buildable price rather than an estimate that has to be reworked:

  • Measured drawings or CAD/PDF layouts for each unit type, with floor levels noted
  • Appliance schedule with model dimensions and required clearances
  • Door style and finish reference per elevation, plus the colour standard if you have one
  • Hardware schedule: hinges, slides, handles or touch-to-open, soft-close scope
  • Worktop, backsplash and splashback responsibility — supplied by us or by others
  • Unit quantities per room type, plus the phasing plan if rooms are handed over in stages
  • Delivery destination and packing preference for container loading
One point worth being direct about: on multi-unit projects, produce one full sample kitchen before releasing the bulk order. It confirms door colour, grain direction, hardware feel and the interface details in real conditions, and it costs far less than correcting dozens of installed kitchens.

How Custom & OEM Service Changes the Conversation

If your project needs a cabinet system that matches an interior design scheme rather than a catalogue line, our Custom & OEM service covers bespoke dimensions, panel materials, finishes and textures, prototyping before volume production, flexible minimum order quantities, and branding such as engraving or logo marking. For projects that also need the surrounding fit-out — wardrobes, vanities, wall panelling, flooring and lighting — sourcing them from the same furniture and building materials supplier keeps finishes consistent across the whole interior and puts one production schedule under your control.

Logistics is part of the same conversation. We arrange sea, air and rail freight, prepare export paperwork, plan packing and container loading, track shipments and deliver door to door, so a phased project receives each room type when the site needs it rather than all at once.

Common Questions From Project Buyers

Can you match a colour from an existing kitchen in our hotel group?

Yes, if you send a physical sample or a recognised colour reference. Send it with the enquiry, because finish matching is confirmed before production, not after.

What is the smallest order you will build as a custom package?

Minimum order quantities are flexible and depend on the specification, so tell us the unit count per room type and we will confirm what is practical for your project.

Do you supply the worktop with the cabinets?

Worktops and stone surfaces can be arranged together with the cabinetry. Confirm this at quotation stage so cutouts, splashbacks and appliance openings are made in the factory rather than on site.

How do you keep identical units consistent across a phased delivery?

By locking the drawing, finish reference and hardware schedule at approval, then producing each phase from that same approved record. Any change to one of the three restarts confirmation.

Next Step

If you are specifying kitchen cabinetry for a hotel, apartment or villa project, send your drawings and appliance schedule and we will return a buildable specification with the customisation options priced clearly. Send your enquiry through our project enquiry desk and include your unit types and quantities so the first reply is already project-specific.

SANTERSON — China-based manufacturer and one-stop supplier of furniture, interior fixtures and building materials for hospitality, villa and office projects, with custom/OEM production and door-to-door delivery.