A mirror sliding door wardrobe looks simple on a drawing. Two panels, a rail, a reflective face. That apparent simplicity is exactly why these wardrobes get briefed late and specified thinly: the mirror finish, the sliding mechanism and the made-to-measure case all have to be agreed before production starts, not after. If you are sourcing built-in storage for apartments, villas or hotel rooms, the quality of your brief decides whether the first production run is right or whether you are re-making panels across two shipping cycles.
This guide sets out what to send a China-based built-in furniture manufacturer so that a custom mirror sliding door wardrobe can be quoted and produced without guesswork.
Start With the Room, Not the Door Finish
Most incomplete enquiries describe the look and leave out the conditions the wardrobe has to survive. For a sliding wardrobe, three room facts change the build before any finish is chosen:
- Clear opening width and depth. Sliding panels overlap on the track, so the internal depth you get is less than the overall carcass depth. Send the finished-floor-to-ceiling height, the wall-to-wall width at three points along the run, and the available depth at the left, middle and right of the opening. Walls in refurbished villas and apartments are rarely square, and a single measurement invites an on-site problem.
- Floor finish at the track line. Say what the wardrobe will sit against — engineered timber, tile, carpet, or a screed that has not yet been laid. The threshold and bottom track detail depend on it, and if the flooring is still to come you need to say so in writing.
- What sits beside the wardrobe. Door openings, radiators, skirting, recessed niches and bed positions all affect which panel stacks where. A sketch with dimensions beats a rendered mood board.
Our Mirror Sliding Door Wardrobes are listed as made-to-measure, with finish, layout and dimensions specified per project. That only works if the dimensional information above arrives with the enquiry.
Specify the Mirror Face and What Frames It
"Mirrored doors" is not a specification. In a brief, split the door leaf into three decisions:
| Decision | What to state in the brief |
|---|---|
| Mirror face | Which door style you are working from, and whether the mirror is full-height or part of a mixed panel. Compare Mirror Sliding Door Wardrobes with Mirrored Hinged Wardrobes if the room allows a swing clearance — hinged leaves need frontage, sliding leaves do not. |
| Frame and trim | Whether the mirror sits in an aluminium frame or a board-edged panel, and the colour of that frame. Frame colour sets how the reflection reads against the wall and ceiling finishes around it. |
| Handle detail | Recessed pull, edge pull or handleless profile. This changes the gap between leaves and therefore what you see in the mirror when both doors are closed. |
Where a room needs a full-height reflective surface but the wardrobe run is interrupted by a corner or a niche, ask about Closet Sliding Panels as well. They are configured to the same kind of project-specific dimensions and finish options, and they let you carry a sliding face across an opening that a standard wardrobe carcass cannot bridge.
Send the Internal Layout With the Elevations
A mirror door hides everything, so the internal plan is what the client actually lives with. Send one elevation per wardrobe run showing:
- Hanging zones split into short-hang and long-hang, with a height for each rail.
- Corner returns and any L-shaped or U-shaped run, drawn on the plan rather than described in a note.
- Drawer banks and their heights — state how many drawers and at what level from the floor, since the bottom track can restrict the lowest drawer front.
- Shelf storage above the hanging zones, plus any open display niches you want kept out of the mirror line.
- Anything integrated: interior lighting, a mirror on an internal panel, or a valet/ironing fitting.
For project work, note which rooms repeat. In an apartment block or a hotel floor, the same layout repeated across units is where cost is won — but only if you also flag the rooms that differ, such as a smaller master with an L-shaped return. Our Custom Minimalist Bedroom Wardrobe work is specified this way: personalised sizes, internal layouts, door styles and surface finishes agreed per project before manufacture.
Agree the Hardware Duty and the Replacement Route
Sliding wardrobes fail at the moving parts long before the panels wear. Put these in the brief as questions, and get the answers in writing on the quotation:
- Which track and roller set is proposed, and whether it is the supplier's standard or a named component.
- Whether spare rollers, guides and bottom tracks can be ordered later as separate parts. Built-in wardrobes stay in a building for years; a replacement part that has to travel with the next furniture container is a poor outcome.
- How the panels are lifted out and re-hung for servicing, so the site team knows after handover.
Ask for the assembly sequence and fixing detail at the same time as the price. A made-to-measure wardrobe that cannot be assembled in the room it was measured for is not a manufacturing problem or a site problem — it is a briefing problem, and it is settled on paper before production.
Cover Shipping and Site Sequence in the Same Brief
Built-in joinery is flat-packed and panel-heavy, so it moves differently from loose furniture. Tell the manufacturer who is handling freight, which port or delivery address applies, and whether the wardrobes arrive in the same container as other fit-out items or on their own. If you are sourcing storage together with kitchen cabinets or bathroom fixtures, say so — packing, container loading and delivery sequence are planned together more easily than they are patched together later.
Then state the site order: which rooms must be finished first, and what trade blocks the wardrobe line. A mirror-faced sliding wardrobe should be installed after wet trades and floor finishes are complete, and your programme needs to say that clearly so panels are not delivered to a damp, unfinished room.
The Six-Line Brief That Gets a Usable Quote
If you send only the following, a manufacturer can quote accurately and flag what is missing:
- Number of wardrobe runs, with width, height and available depth for each, measured at multiple points.
- Door style chosen — sliding or hinged — and the reference product or finish you are working from.
- Internal layout per run: hanging heights, drawer counts, shelves, integrated lighting.
- Floor and wall finish at the wardrobe line, and whether those finishes are already installed.
- Freight arrangement, delivery address, and which other fit-out items ship with the joinery.
- What you need confirmed back: hardware set, spare-parts availability, assembly sequence, and lead time for the first run.
That is enough to turn "mirrored sliding wardrobe" into a specified product. Send it with your drawings and the quotation you receive will be comparable between suppliers — which is the point of the brief.
Questions Worth Putting in the Brief
Yes, provided each opening is measured individually. Panel counts and internal zoning change with width, so keep the finish and hardware constant and let the layout flex per room.
Order them after you have confirmed the floor build-up and threshold detail. If the flooring is not yet installed, state the intended finish and final floor level in the brief so the bottom track is specified for that condition.
A single height or depth measurement taken from an out-of-square wall, combined with an unspecified floor finish at the track line. Both are fixed by measuring at several points and recording the finish condition.
SANTERSON is a China-based furniture and building materials manufacturer supplying custom built-in furniture for villa, hospitality and apartment projects. Send your drawings and room dimensions and we will confirm layout, hardware and specification before production.