A quotation for a Modern Glass Column Floor Lamp, LED Ring Standing Lamp for Living Room & Lobby is easy to compare only when every supplier prices the same thing. Because this piece is a sculptural, made-to-order item — transparent glass columns stacked around illuminated LED rings — two quotes that look identical on the surface can differ in glass thickness, driver quality, base engineering and packing. The checklist below tells a procurement buyer exactly what to put into the request for quote (RFQ) so the numbers land side by side and the installation goes smoothly.

1. Start with the reference and the quantity breakdown

Send the supplier a model reference or product link first, then state quantities in a way that matches how the lamps will actually be placed. For a lobby scheme this usually means separate lines for the feature pair flanking the reception desk, single pieces beside lounge seating, and any duplicates repeated down a corridor. Note where each lamp sits, because floor lamps in a lobby are handled far more than the ones in a guest room: the position decides how much protection the base and glass need.

Also state whether you want this single design across the whole project or a coordinated family. The same catalogue offers related standing lamps — a Modern Arc Floor Lamp, Curved LED Standing Lamp for Living Room & Bedroom and a Modern Globe Floor Lamp, Gold Reflective Standing Lamp for Living Room & Hotel Room — so a single order can cover lobby, guest room and lounge with one supplier managing the finishes.

2. Specify dimensions, proportions and clearances

Give the maximum overall height the ceiling and joinery allow, plus the footprint you can spare on the floor. A column lamp reads as a vertical element, so small changes in height change how it relates to a reception counter or a sofa back. Ask the supplier to confirm the finished overall height, the diameter of the base, and where along the column the LED rings sit, then check those figures against your drawings before you compare prices.

3. State materials and finishes explicitly

Spell out what the piece should be made from rather than relying on a photograph. For this type of lamp that means the type of glass column, the metal used for the frame and base, and the finish applied to it — polished, brushed or coated. If your project already uses brass ironmongery, black steel frames or mirrored panels nearby, say so in the RFQ and ask for a sample of both the metal finish and the glass edge treatment. Where a bespoke size or finish is needed, flag it as custom work up front; SANTERSON lists Custom & OEM Service covering design and prototyping, material finishes and private labelling, so custom items should be quoted as engineered items rather than treated as a footnote.

4. Put the electrical specification in writing

This is where most floor lamp quotes go wrong. Ask the supplier to state, for each line item, the light source type, whether the driver is included and where it is housed, the input voltage range for your market, and how the lamp is switched or dimmed. If your scheme calls for dimming on a lobby circuit, say which control system the electrician is working to, because driver compatibility has to be settled before production — not after the lamps arrive.

Do not assume electrical data from marketing photographs. Where the catalogue record does not already publish lumen output, wattage or colour temperature, require the supplier to confirm those values and the relevant electrical certification for your country in writing with the quotation. Ask for a wired sample of one lamp before the balance is released, so you can judge the ring brightness and colour against the rest of the lighting layout.

5. Address safety, stability and installation

Tall glass-and-metal standing lamps in public lobbies need a base that stays put under contact. Ask how the lamp stands without assistance: base weight, whether a ballast or fixing plate is supplied, and whether the floor finish — stone, timber, carpet — changes what is needed. Confirm the total weight per piece and the height of the centre of gravity if your project has any requirement for anchoring furniture.

Ask which parts arrive assembled and which are fitted on site, how many people a typical installation takes, and how long it should take per lamp. That information feeds directly into your installer's programme, and it also reveals whether the glass columns travel pre-fitted to the rings or need alignment on site.

6. Require protective packing and a spares plan

Glass columns are the shipping risk, so make packing part of the quotation rather than an afterthought. Ask for the packing method — moulded inserts, glazing crates, separate crating for the glass — the number of packages per lamp, and the packed dimensions and weight so you can price freight accurately. Then agree spares in advance: replacement columns, spare LED rings and drivers ordered with the main batch cost far less than sourcing them a year later when the lobby lamp is out of service.

7. Set commercial terms that make quotes comparable

Ask every supplier to quote on the same basis: unit price, tooling or set-up charges for custom sizes, sample cost and whether it is credited against the order, lead time from confirmed drawings, packing and freight to your delivery address, insurance, and the payment schedule. State your required delivery window and site access conditions. If several trades are being bought together — lighting with other lighting, joinery, flooring or wall finishes — say so, since one supplier consolidating shipments saves handling as well as cost; the Logistics & Door-to-Door Delivery service covers freight forwarding, customs paperwork and container loading for multi-category orders.

Finally, ask what happens after handover. Request the warranty period in writing with its exclusions, the spares availability window, and who handles a damaged glass column on site. SANTERSON lists Installation & After-sales Support covering installation, inspection and snagging, warranty coverage and spare parts, so make the scope of that support an explicit line in the quotation instead of an assumption.

A short RFQ template you can copy

  • Model reference or product link, plus a photo of the intended position.
  • Quantity by location: lobby feature pair, lounge singles, corridor repeats.
  • Maximum overall height, allowed footprint, ring positions relative to seating and counters.
  • Glass type, metal and finish, with samples required before production.
  • Light source, driver location, input voltage for the destination market, dimming control system.
  • Confirmed lumen output, wattage, colour temperature and electrical certification for your country.
  • Base stability method, total weight, anchoring needs, floor finish type.
  • Packing standard, packages per lamp, packed dimensions and weights.
  • Spares list with prices: columns, LED rings, drivers.
  • Lead time from approved drawings, Incoterms, freight, insurance, payment terms.
  • Warranty period and exclusions, spares availability window, after-sales contact.

Send that list to two or three suppliers and the differences between their quotations become obvious rather than buried. If you would like a quotation prepared against this checklist, contact SANTERSON at santerson@qq.com or on WhatsApp at +86-13928214007 with your drawings and quantities, and we will confirm specification, packing and lead time in writing before production begins.