A recessed shelf looks like the simplest item on a joinery schedule — until it arrives with the wrong set-out, an exposed edge band or a back panel that does not line up with the tile joint behind it. Niche shelving is built into the wall, so every error is permanent and visible. The brief you send a manufacturer decides whether the quotation comes back accurate or whether the whole opening has to be re-made.

As a China-based maker of custom furniture and building materials for villa, hotel and office projects, SANTERSON receives enquiries in both styles: a single line asking for "a niche shelf, 800mm", and a proper brief with drawings, finishes and site conditions. The second type costs less, moves faster and lands closer to the drawing on the first delivery. Here is what a good brief contains.

Start with the wall, not the shelf

Before any dimension means anything, the manufacturer needs to know where the unit sits and what it is built into. Send a plan view and an elevation of the room, mark the wall that carries the niche, and state whether that wall is new stud work, an existing masonry wall or part of a larger built-in run such as a wardrobe or storage wall.

This matters because the surrounding build dictates how the niche is framed, how deep the reveal can be, and where services may sit behind it. A display niche in a bedroom storage wall is a different fabrication from a shelf recess beside a bath, even when both measure 600 × 400 mm.

The dimensions to send, and how to send them

Give overall opening size, internal clear size and the depth of the recess as three separate numbers. Do not assume the maker will guess which one you mean.

DimensionWhat to stateWhy the maker needs it
Opening width and heightFinished opening size in millimetres, on a scaled elevationSets panel sizes, framing and how edges are closed off
Recess depthDepth from finished wall face to the back of the nicheDetermines shelf depth, bracket space and whether items actually sit flush
Shelf positionsHeight of each shelf from the floor or from the base of the nicheFixes vertical dividers and tells you whether tall pieces fit
Niche count and spacingHow many openings, and the gap between themAffects wall structure, panel joints and how the run is delivered
Sill / reveal detailWhether edges are square, rebated or returned into the wallDecides edge banding, mitres and the shadow line you will see
Ceiling or skirting interactionDistance to the nearest ceiling line, cornice or skirtingPrevents the unit colliding with trims on site

Send dimensions in millimetres and say whether they are first-fix openings or measured after the wall is finished. If you have a surveyor's drawing, send it; if measurements came from site, say so plainly, because tolerances travel differently once panels are manufactured.

Say what goes on the shelf

The intended contents change the engineering more than most buyers expect. State clearly whether the niche will hold books, ceramics, artwork, toiletries, towels, plants or a combination.

  • Books and other dense loads need shelf spans sized for that weight, not for decoration.
  • Bathroom niches sit in a wet zone, so the board and edge treatment must be specified for a damp environment.
  • Display pieces usually want lighting; mention it at brief stage, not after production starts.
  • Household items that move around need a shelf depth with room to spare, not a shelf sized to the tallest object.

If the niche is part of an integrated wall where open display sits next to closed storage, say so in one sentence. Our open display niches are made within the Integrated Storage Walls collection precisely because the open and closed elements have to be ordered, finished and installed as one system.

Specify materials and finishes with reference names

"Light wood" means four different things to four different factories. Give the substrate, the surface and the sheen separately: for example a melamine-faced panel in a warm oak grain with a matte surface, or a lacquered panel in a specific RAL or paint reference supplied by your designer.

Also state what has to match. If the niche must sit flush with custom niche paneling, wardrobe doors or wall panelling already specified elsewhere in the project, name those items and send their finish references and photographs. Grain direction, edge colour and sheen are where a near-match falls apart.

Where the wall itself is clad — in stone, tile or a decorative panel — tell the maker what the niche will be butted against, and who is responsible for that adjacent work. This is the line item most often left out of an enquiry, and the one most often argued about on site.

Decide how it will be lit before it is built

A display niche without a lighting decision at brief stage usually ends up with surface-mounted fittings and visible cable. Decide now whether you want concealed LED strips in a channel, a fitting inside the shelf, or no lighting at all, and pass that to the manufacturer with the electrical plan.

Ask where the driver sits and how it will be reached for servicing. A strip can be replaced; a driver buried behind a fixed panel is not a detail to discover during handover.

Package, access and installation: the part that protects your price

A niche unit travelling internationally is a joinery package, not a shelf. Give the manufacturer the practical site facts: floor level, lift or stair dimensions, corridor widths, door openings the panels must pass through, and the delivery address with any access restrictions. Ask how the unit will be packed and crated, and confirm who carries out installation.

SANTERSON works on turnkey projects where design, custom/OEM production, freight and on-site installation are coordinated by one team — see our Custom & OEM Service and Installation & After-sales Support pages. If you are managing installation yourself, say so in the brief; the packing list, fixings and assembly sequence are then written for your own trades.

A brief template you can copy

Write these ten lines into your enquiry and most avoidable errors disappear:

  • Project type, location and the room the niche is in.
  • Wall construction and whether the opening is finished or first-fix.
  • Scaled elevation with opening size, recess depth and shelf heights.
  • Number of niches and spacing between them.
  • What the shelves will hold, including any heavy loads.
  • Substrate, surface, sheen and finish reference; what it must match.
  • Lighting decision, with the electrical plan attached.
  • Adjacent finishes — tile, stone, panelling — and who installs them.
  • Site access: lift, stair, door widths, delivery address.
  • Required site date and who performs installation.

Ask the manufacturer to return a shop drawing for your sign-off before production. That single step converts an assumption into a record, and it is where dimension, finish and lighting questions get settled cheaply.

Questions worth expecting from a good manufacturer

Should we send drawings if the wall has not been built yet?

Yes. Send the design intent now and flag which dimensions are provisional. The maker can then quote on a range, confirm the framing they need, and come back for a site re-measure before panels are cut.

Can we change the shelf layout after production starts?

Not without cost. Fixed dividers, rebated edges and lighting channels are cut to the approved drawing, so treat the shop drawing as the last free change. Layout changes belong in the brief, not in a message mid-production.

What if our niche is one of many across several rooms?

Send a schedule rather than individual notes: one row per opening, with room, size, depth and finish. Repeating units are cheaper and more accurate when they are listed together, and it lets the factory batch panels of the same finish.

If you want a second opinion on an existing niche detail, or need open display shelving coordinated with wardrobes, wall panelling and vanities for one project, send us the drawings and finish references and we will come back with a shop drawing and a quotation.

SANTERSON manufactures custom furniture, built-in joinery and building materials in China for villa, hotel and office projects worldwide. Email santerson@qq.com or contact us through our contact page, and include the ten lines above so your first quotation is the one you can build on.