A floating TV unit looks simple on a drawing: a box fixed to a wall, a screen above it, some storage underneath. That apparent simplicity is exactly why it goes wrong so often on site. A wall-mounted media unit carries a television, spans the width of a living room elevation, and has to hold its line against a wall that is never perfectly flat. When a project buyer treats it as an off-the-shelf item instead of a made-to-measure built-in, the failures are predictable — visible fixings, an unsupported substrate, a reveal that does not line up with the skirting or the ceiling, and services left behind the wrong panel.
If you are sourcing these units for villas, serviced apartments or hospitality guest rooms, the supplier you choose decides whether the detail survives handover. Below is what we would check before placing an order, drawn from how built-in furniture is actually specified and delivered on project work.
1. Made-to-measure sizing, not a size ladder
The first question to put to any Floating TV Units supplier is whether the unit is manufactured to your dimensions or simply selected from a fixed range. Site dimensions vary room to room, and on refurbished work the wall you are fixing to rarely matches the drawing. A made-to-measure unit lets you set the width to the elevation, the depth to the television and hardware you have chosen, and the height to the sightline of the seated viewer.
Ask specifically what can be varied: overall width and height, carcass depth, drawer and door layout, and the position of any cut-outs for sockets, terminal plates or cable drops. On our own Floating TV Units, sizing, finish and layout are all specified per project rather than fixed in advance, and dimensions are confirmed with the buyer before production starts. A supplier who will not confirm dimensioned drawings before manufacture is a supplier who is passing tolerance risk to your site team.
2. Wall construction and fixing method agreed in writing
A floating unit is only as good as what holds it up. Before ordering, establish the wall build-up at each location — masonry, stud partition with noggins, timber battening, or a steel-backed frame — and agree the fixing detail with the supplier and your contractor together. This is one of the most common points where a procurement package falls apart, because the furniture supplier assumes solid backing and the builder assumes a batten frame.
Get three things confirmed in writing: the fixing system and load path, the minimum substrate requirement, and who supplies the reinforcing or blocking. Where a heavy screen or a deep carcass is involved, ask whether the supplier provides a backing frame or requires one on site. A supplier with real installation experience will answer this question without hesitation; that answer alone tells you a lot about how previous projects have run.
3. Materials and finish options you can actually specify
A media wall is read at close range in a living space, so the finish matters more than on most casework. Check whether the supplier offers real material choices — veneer, lacquer, laminate, melamine, glass fronts, metal-framed inserts — and whether those finishes carry through consistently across the drawer fronts, the carcass edges and any adjacent tall units or shelving in the same room.
This is where a supplier who also manufactures other casework earns their place. When your kitchen cabinetry, wardrobes and media wall come from one factory, the veneer match, edge banding and hardware are drawn from the same batch of decisions. If you want lighting in the niches, look at how that is handled: our Santerson Integrated LED Media Units are configurable with integrated lighting, and the electrical specification — driver location, transformer access, control method — has to be confirmed for the selected design before anything is cut.
4. Storage configuration designed around how residents use it
Ask the supplier to show layouts built around function rather than appearance: open display niches against closed cabinets, drawers for consoles and set-top boxes, doors that conceal a media cabinet without blocking ventilation or remote signal, and shelf heights sized for the equipment actually specified. For mixed use, an Open & Closed Combo Unit is often the practical answer in a family villa, while guest rooms usually need less open shelving and more concealed storage.
Where a full wall elevation is required rather than a single floating box, ask whether the same supplier can produce floor-to-ceiling systems that integrate the TV recess — Full Height Media Walls and integrated TV panels keep the joinery, the reveal and the finishes in one package instead of three.
5. Samples, drawings and approval stages
A serious supplier works through a documented sequence: brief, design proposal, quotation with detail confirmation, then production and shipment. Insist on shop drawings signed off by your designer or architect before manufacture, and request finish samples for the exact colours and veneers you have specified. For multi-unit work, confirm whether one prototype or first-article unit is produced for approval before the balance is released.
6. One supplier across the fit-out
Media walls rarely sit alone. They meet flooring, wall panelling, lighting and sometimes stone or porcelain cladding, and every junction is a coordination risk when those items come from different vendors. An one-stop furniture and building materials supplier reduces that risk by keeping the interfaces inside one production and delivery schedule — particularly useful on villa and hospitality projects where casework, joinery and finishes all need to arrive in the right sequence.
7. Packing, freight and site sequencing
Wall-mounted casework is easily damaged in transit and easily damaged again on site. Ask how units are packed, whether carcasses ship assembled or flat, how heavy sections are handled for offloading, and how deliveries are sequenced so the joinery arrives after first fix and before decoration. Confirm freight mode, documentation and who handles customs clearance in the destination country. For Australian buyers, ask directly about landed-cost breakdowns and delivery to site rather than port only.
8. Installation support and snag resolution
Finally, establish what happens after the crates land. Ask whether the supplier provides installation guidance, fixing details and an on-site handover, or whether your contractor carries the whole risk. Then ask how snags are handled: replacement panels, touch-up kits for finishes, spare hardware, and the route for raising a defect. On a floating unit, a misaligned carcass is not a cosmetic issue — it needs to be corrected before the screen goes on the wall.
A short pre-order checklist
- Dimensioned shop drawings issued and signed off, including cut-outs for sockets and cable routes.
- Wall substrate and fixing method confirmed with the builder, in writing, before manufacture.
- Finish samples approved against the specified veneer, lacquer or laminate.
- Storage layout agreed against a list of equipment to be housed.
- Lighting and electrical specification confirmed for any lit niche or integrated fixture.
- Packing method, delivery sequence and offloading plan agreed for site conditions.
- Snag and replacement route defined before production starts.
SANTERSON has manufactured furniture and building materials since 2008 and supplies project work internationally, with custom and OEM service covering bespoke sizing, finishes and layouts. If you are specifying media walls or floating units for a villa, apartment or hospitality project, send us the elevation drawings and we will come back with dimensioned proposals and finish options.