A swim spa on a hotel terrace or in a villa garden has to work twice over: it is an amenity guests photograph and use, and it is a piece of plant that your project team has to site, wire, plumb and maintain. That dual role is why the model selection decision is worth making carefully rather than by default. This guide walks through Outdoor Swim Spa WS-S06 from both sides of that table — what the specification actually gives a hospitality or villa buyer, where its limits sit, and how to confirm the configuration before you place an order.
What the WS-S06 is designed to deliver
The Outdoor Swim Spa WS-S06 sits in our configurable outdoor swim and hydrotherapy range. In the catalogue it is listed at 5820 × 2220 × 1110 mm, which places it in the compact end of the swim spa category — a shallow pool shell with a wide footprint rather than a deep one. For a rooftop terrace, a podium deck or a villa courtyard where excavation depth is constrained, that shallow, low-height shell is usually easier to accommodate than a deeper plunge pool.
The features shown for this model are water jets, LED lighting, ozone sanitisation, a waterfall and four water columns. In practice these split into two jobs. The jets, waterfall and water columns carry the leisure and hydrotherapy value: they are what make the spa an amenity worth marketing rather than a small pool. Ozone handles part of the water treatment load, which matters more on a hotel or resort installation where turnover is high and you want to keep chemical dosing modest. The LED lighting extends usable hours into the evening, relevant both for guest experience and for landscape lighting schemes.
The captured specification also lists one control system, two water pumps, one filter pump, a total of 56 jets, two LED lights plus 18 small LED lights, and a total power figure of 6.35 kW. Treat those as catalogue reference points for the base configuration, not as a final engineering schedule — see the confirmation checklist at the end of this article.
Reading the WS-S06 specification against your site conditions
Footprint and shell depth
Start with the three catalogue dimensions and map them onto a real drawing. The length and width determine the deck clearances you need around the shell for circulation, seating and maintenance access; the 1110 mm shell height determines whether the unit can sit above ground on a slab or deck, be partly recessed, or needs a sunken pit with its own drainage and access provisions. On an existing hotel structure, load is the first question your structural engineer will ask, so send them the shell dimensions and the filled-water weight early rather than after the layout is fixed.
Jets, pumps and how the spa will actually be used
A jet count of 56 across two water pumps points to a hydrotherapy-led configuration. That suits a hotel wellness offering or a villa where massage and relaxation are the priority. It is a different brief from lap-style training, where continuous directed flow matters more than jet density. If your client's programme calls for swim training, look at the variants that list a swim training system instead — several Swimming Pools and Swim Spas in the range carry one, including the WS-S06CT and WS-S06B-T.
Power and services
The 6.35 kW total power figure is the number your electrical designer needs to work with, together with the local supply arrangement. Electrical requirements differ by configuration and by country, so the supply capacity, protection device and cable route should be agreed with your MEP consultant and confirmed against our configuration sheet before any deck or wall is closed up. The same applies to drainage, overflow and any plant room or equipment recess.
Where the WS-S06 sits within the wider range
The S06 family is deliberately close-dimensioned, so you can hold the same deck layout and change what the water does. The comparison below uses catalogue dimensions and features as listed on each product page.
| Model | Catalogue dimensions (mm) | Features shown | Swim training system |
|---|---|---|---|
| WS-S06 | 5820 × 2220 × 1110 | Water jets, LED lighting, Ozone, Waterfall, 4 water columns | Not listed for this model |
| WS-S06B | 5800 × 2200 × 1250 | Water jets, LED lighting, Ozone, Waterfall | Not listed for this model |
| WS-S06B-T | 5800 × 2200 × 1420 | Water jets, Temperature setting, LED lighting, Ozone, Swim training system | 1 set |
| WS-S06C | 5880 × 2380 × 1400 | Water jets, Temperature setting, LED lighting, Ozone | Not listed for this model |
| WS-S06CT | 5880 × 2380 × 1400 | Water jets, LED lighting, Ozone, Swim training system | 1 set |
| WS-S06CT-L | 6670 × 2380 × 1400 | Water jets, Temperature setting, LED lighting, Ozone, Swim training system | 1 set |
| WS-S06M | 5900 × 2200 × 1610 | Water jets, LED lighting, Ozone, 4 water columns | Not listed for this model |
Two practical readings of that table. First, shell depth is the real differentiator across the family: from 1110 mm on the WS-S06 up to 1610 mm on the WS-S06M, which changes what the spa is comfortable for — seated hydrotherapy at one end, more standing and water-play depth at the other. Second, where a feature such as temperature setting or a swim training system appears in one variant and not another, that difference should be confirmed against the configuration you are quoting rather than inferred from the model suffix.
Options that decide how the spa performs in a real project
The catalogue lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as options for this range. Availability and compatibility vary by model, so each line needs confirming for your configuration. In a hotel or villa installation these are the choices that most often decide whether the spa is usable year-round:
- Heat pump. The single biggest influence on how many months a year an outdoor spa is genuinely used. Specify it against your target water temperature and the ambient conditions of the site, and check the electrical load it adds to the figure above.
- Insulation. Determines how much of that heating input is retained overnight and between guest sessions. On a commercial installation this shows up directly in running cost.
- Filtration. Sand filtration alongside the listed filter pump sets the maintenance rhythm — backwash intervals, water use and access to the plant.
- UV sterilisation and ozone. Used together with dosing, not instead of it. Worth specifying on a hospitality installation where water quality has to hold up under frequent use.
- Steps and access. Entry arrangement affects safety, accessibility and how the spa reads in the landscape design. Agree it with the designer before the deck detail is fixed.
How a swim spa moves through a project timeline
A swim spa arrives as part of a wider package, not in isolation, and the sequence matters. Our Custom & OEM Service covers bespoke finishes and configuration, so where a client wants the surround, cover or cabinetry matched to the rest of the outdoor scheme, that decision belongs at design stage rather than at order stage.
From there the workflow we run for villa and hospitality projects runs through consultation, design and planning, production, logistics, installation and after-sales. For a swim spa specifically, three handovers tend to drive the programme: the structural and MEP information going out to your engineers; the confirmed configuration and options list coming back to us before production; and the site being ready — slab, services, drainage and access — before delivery. Freight is arranged by sea, air or rail with customs paperwork and door-to-door delivery handled on our side, but import terms, duties and transit arrangements are project-specific and should be settled per order.
A pre-order checklist for specifiers
- Confirm the shell dimensions against the as-built deck or terrace drawing, including maintenance access on at least two sides.
- Send filled-water weight and shell dimensions to the structural engineer before the layout is fixed.
- Agree the electrical supply, protection and cable route with your MEP consultant, using the confirmed configuration's power figure.
- Decide heating, insulation and filtration as a set — they determine running cost and year-round usability together.
- Confirm which features are actually included in your configuration: temperature setting, swim training system, waterfall, water columns and lighting count.
- Agree the entry arrangement and any steps or seating with the landscape designer before detailing.
- Set out the maintenance routine — dosing, filtration cycles, backwash access and winter provisions for the site's climate.
Getting the specification confirmed
If the WS-S06 footprint suits your site but the base feature set does not fit the programme, the closest variants are a short step away, and the wider Swimming Pools and Swim Spas range covers longer shells and deeper water for projects where the amenity brief is different. Send us the drawings, the intended use and the local supply conditions, and we will return a configuration sheet with the included equipment, options and electrical requirements stated for that specific build.