A 6-metre swim spa is not a catalogue item you simply drop on a deck. Before anyone signs an order, both sides need to agree on what the unit is, what it needs from the site, and who handles everything from production to the first fill of water. If Outdoor Swim Spa WS-PC06CH is on your shortlist — for a villa garden, a resort terrace or a wellness add-on — the questions below are the ones worth putting to any supplier you are evaluating.

Start with the specification sheet, not the brochure photo

The published figures for WS-PC06CH are 6000 × 3000 × 900 mm overall, with a total power figure of 3.25 kW. Treat those two numbers as the start of the conversation, not the end of it. A length and width tell you whether the unit fits your terrace; they do not tell you how the spa is meant to sit — recessed, partly sunken or raised on a platform — or what load the supporting structure has to carry once it is full.

Ask the supplier to state, in writing and against your specific order:

  • how the shell is supported at the base and perimeter, and what sub-base or framing they recommend for a raised installation;
  • which items are included in the quoted price and which are options;
  • the electrical supply the configured unit expects — single or three phase, circuit rating, isolation location;
  • whether the stated power figure covers the equipment actually being shipped to you.

A supplier who can answer those questions with drawings and a line-by-line packing list is working from a real production file. One who answers with adjectives is not.

Equipment, jets and the options that change the price

The WS-PC06CH listing shows 38 jets in total, two water pumps, one filter pump, a single control system, LED lighting and ozone treatment. Those are useful reference points, but jet counts and pump counts only mean something once you know the finished configuration. A heat pump changes the electrical load. Sand filtration changes the plant footprint and where it can be sited. UV sterilisation, insulation and access steps each change what arrives in the container.

Options catalogued for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so confirm your exact combination before ordering rather than assuming an option shown on a related page applies to the unit you are buying.

Practical test: ask for two quotations — base configuration and your intended configuration — with each option priced separately. Comparing the two columns exposes what is genuinely included, and it makes change orders easier to negotiate later.

Does the model match how you intend to use it?

The published specification for WS-PC06CH does not list a swim training system. That matters if your brief is lap swimming against a current rather than hydrotherapy and relaxation. The range around it covers both jobs: an Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool pairs a longer swimming channel with a separate relaxation area, and a Luxury Outdoor Swim Spa with Massage Jets, LED & Water Features leans towards the wellness side. If your client wants exercise and recovery in one footprint, say so early — the model choice follows the use case.

Where the space is irregular, or the spa has to follow a terrace edge or an interior courtyard line, shape itself may need work. A Customizable Shape Outdoor Spa covers square, round, oval and curved layouts with an acrylic shell and structural reinforcement, which is the route to take when a standard rectangular footprint will not sit cleanly on site.

What the supplier has to cover beyond the shell

A swim spa is a project, not a parcel. The parts of the job that most often fall between two contractors are freight, site preparation and commissioning, so put them on the table in writing:

  • Freight and delivery. Ask how the unit ships, what packaging and container loading plan is used, who handles customs paperwork, and where door-to-door delivery actually ends — kerbside or the installation position.
  • Site preparation. Confirm who pours or builds the supporting base, who runs the power and to what point, and who supplies drainage for draining and servicing.
  • Installation and handover. Ask whether technicians attend on site, what commissioning includes (filling, balancing, control-system walkthrough), and what documentation is handed over at completion.
  • After sales. Get the warranty terms in writing, along with which wear items are covered, how spare parts for pumps, jets and controls are supplied, and who supports you if a component fails on site.

SANTERSON describes its project scope as running from design and production through door-to-door delivery, with custom/OEM service, logistics, installation and after-sales support listed as part of the offering — see Our Services and Turnkey Solutions. Those names on a page are not a scope guarantee. Ask for the same items in your quotation, itemised, and the scope becomes enforceable instead of implied.

How to read a supplier's answer

Three signals separate a manufacturer who can deliver this kind of order from a trader relisting someone else's stock:

SignalWeak responseResponse worth acting on
Specification controlQuotes the brochure figures and nothing elseConfirms dimensions, power and equipment against your configuration, and flags what changes with each option
CustomisationSays anything is possibleExplains what can be changed on this model — options, finishes, access steps, plant location — and what cannot
Project delivery"We ship worldwide"Names the shipping route, packaging plan, paperwork they provide, and who attends for installation and handover

SANTERSON has been manufacturing furniture and building materials in China since 2008, with project work spanning villas, hospitality and offices, including villa projects referenced in Sydney, Melbourne, Perth, Willoughby and North Turramurra. That background matters only insofar as it converts into drawings, a clear quotation and an installation plan for your site — which is exactly what you should ask for at the enquiry stage.

Questions to send with your enquiry

Can WS-PC06CH be installed on my terrace as built?

Send plan dimensions, the deck or slab construction, and access routes for delivery. Ask for the recommended support detail and load notes for a filled unit before you commit to the sub-base.

What electrical work does the configured spa need?

Ask for supply type, circuit rating and isolation requirements for your exact equipment list, including any heat pump. Hand that sheet to your electrician rather than working from a general power figure.

Which options should I price now rather than add later?

Anything that affects the site: filtration type, insulation for cooler months, steps and access, and plant location. Adding them after production starts usually means rework on both sides.

What happens if a pump, jet or control component fails after handover?

Ask which parts are under warranty, how replacements are shipped, and who carries out the repair. Get it in writing before payment terms are agreed.

Talk through your swim spa requirement with our project team. Send us the site dimensions, intended use and the options you want included, and we will come back with a configuration, an itemised quotation and the delivery and installation scope for WS-PC06CH or a closer-fit model from the swim spa range.

SANTERSON — furniture and building materials manufacturer, one-stop project supplier. Contact: PHILLIP · Phone/WhatsApp +86-13928214007 · Email santerson@qq.com · Enquiry