A wabi sabi rattan kitchen cabinet with island travels a long way before it reaches an Australian site: ocean or road freight, handling at both ends, storage in transit sheds and finally a lift or stairwell in a villa or boutique hotel. Cabinet doors, woven rattan panels, stone-look benchtops and an integrated island are the parts most often damaged in that journey — and most of those damages are preventable if packaging is agreed before production starts, not after the containers arrive. Here is what buyers should confirm with their supplier at quotation stage.
1. How the units leave the factory: assembled or flat-packed
The first question is not what material protects the surface, but how the cabinetry is broken down for transport. Ask your supplier to state, in writing and per line item, whether carcasses ship assembled with doors removed, fully flat-packed as panels, or as a mixed shipment. Each option changes landed cost and site labour:
- Assembled carcasses reduce on-site assembly time but occupy more cubic metres, so fewer units fit in a 20' or 40' container.
- Flat-packed panels maximise container use and lower freight per unit, but they shift assembly work to your installer and require accurate hardware sets and panel labelling.
- A mixed shipment is common for project orders: run cabinets flat-packed, island units assembled, doors and drawer fronts packed separately.
Ask for the packing list format before you order. A list that identifies each carton by room, elevation code and unit number lets your site team reconcile deliveries against drawings instead of opening boxes to find out what is inside.
2. Construction of the packing itself
Timber-framed cases and carton boxes are both used for cabinetry; what matters is matching the case to the component and the transport leg. Confirm these details:
| Item to confirm | What a good answer looks like |
| Case type | Plywood or timber-framed cases for assembled carcasses and islands; multi-wall carton for panels, with corner protection |
| Surface protection | Film or foam facing on painted and lacquered fronts, edge protectors on panel corners, separators between finished faces |
| Rattan and woven panels | Flat, rigid support behind and in front of the weave; no strapping pressure directly across a woven area |
| Glass and stone-look tops | Vertical A-frame racking, foam between faces, marked "fragile / this side up" on at least two sides |
| Hardware and hinges | Bagged per unit, listed on the packing list, and packed in a carton that will not abrade finished fronts |
| Moisture control | Desiccant or moisture barrier inside cases for long sea passages; case floor off the container floor |
| Fumigation and timber treatment | Treatment and marking on solid timber cases where the destination requires it, with the certificate supplied in the document set |
Ask specifically about the woven rattan panels. A wabi-sabi kitchen relies on that texture, and a crushed or creased weave cannot be flattened back into shape. Get written confirmation of how those panels are supported, and ask for photographs of the finished packing before containers are loaded.
3. Marking, documentation and the unloading plan
Packaging is only half of it — the other half is what your site team can read on the box. Confirm that cartons and cases carry unit or elevation numbers that match your shop drawings, plus handling symbols and a gross weight, so the right crew and equipment are booked for unloading.
On the paperwork side, ask which documents will accompany the shipment: packing list, commercial invoice, and — where applicable — certificates of origin and import permits. If you are clearing customs yourself rather than taking a delivered service, request the carton dimensions and weights early so you can quote inland freight and storage accurately.
4. Inspecting on arrival, and what to record
Agree the inspection routine in advance so a claim is possible if something goes wrong:
- Photograph case condition — punctures, crushed corners, water staining — before opening anything.
- Count cases against the packing list at the delivery point and note shortages on the delivery note the same day.
- Open one case per component type first: a carcass, a woven-front door, an island panel. If the packing method is failing, you want to know before all cases are opened and installed.
- Check the woven panels and mitred corners under raking light, and confirm reserved positions for built-in ovens match the openings on site.
Record the container number alongside the photographs. Where cargo insurance has been arranged, that link between container, packing list and damage photo is what makes a claim reviewable rather than a dispute about who damaged what.
5. Where packaging decisions are cheapest to change
Packaging specification is settled during production coordination, not at loading. Once the carcasses are built and finished, switching from assembled to flat-packed changes hardware sets, panel labelling and assembly instructions — a real cost, but far smaller than replacing damaged woven fronts on site.
That is one reason project buyers work with a one-stop furniture and building materials supplier: the same team that builds the cabinetry also arranges logistics and door-to-door delivery, so case design, container loading and the document set are coordinated against one production schedule instead of handed between three parties. If your package also includes flooring, wall panelling, lighting and bathroom ceramics from the same order, ask how those categories are separated in the container — joinery cases and loose goods packed together is a frequent source of avoidable damage.
Packaging points to close out before you place the order
- Assembled versus flat-packed, stated per line item, with cubic metres and container count.
- Written packing method for woven rattan panels and for stone-look tops.
- Case type, corner protection, moisture barrier and marking convention.
- Packing list format keyed to your drawing numbers.
- Timber treatment documents where the destination requires them.
- Pre-loading photographs of packed units.
- Inspection and reporting routine agreed in writing, including who bears cost for transit damage.